• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제29권3호
• /
• pp.233-240
• /
• 2007

Osteochondroma is a common benign tumor of the axial skeleton, especially the distal metaphysis of the femur and proximal metaphysis of the tibia. However, it occurred rarely on the facial skeleton. The coronoid and condylar processes have been considered to be the most common sites of occurrence for osteochondroma of the facial skeleton. The first treatment of osteochondroma is condylectomy, whereas extirpation was done by excision with condyle salvage. Condylectomy presents decrease of vertical dimension, jaw deviation, malocclusion. So, reconstruction is need. Methods of reconstruction are as follows: no reconstruction, condyloplasty, discectomy, costochondral graft, discplication or coronoidectomy, eminoplasty, alloplastic spacer placement, Le Fort I level maxillary osteotomy, extraoral and intraoral vertical ramus osteotomy. This is a case report of a 28-year old woman who had facial asymmetry, malocclusion and temporomandibular joint pain. We obtained moderate functional and cosmetic results with surgical removal of the osteochondroma by condylectomy and concomitant reconstruction of condyle by vertical ramus osteotomy with sliding technique.

• 연구논문집
• /
• 통권24호
• /
• pp.13-26
• /
• 1994

The choice of design parameters for a robot arm depends on the desired workspace, load lifting capacity, application requirements, and the performance of the robot. The inverse process, which is the determination of a single robot's workspace for a given specification is also a common practice and is as important to the designers as it is to the users. Based on the geometric influence coefficients, the workspace areas on the vertical Y-Z plane are investigated and calculated. Using these areas, the effects of link parameters, link length ratios and joint rotation angles, are investigated.

• 건축역사연구
• /
• 제16권1호
• /
• pp.83-99
• /
• 2007

This study examines the joint and splice of wooden structure at Geunjeongjeon Hall of Gyengbok Palace, which was constructed in the late Joseon Dynasty. The scope of the study is on the part of columns, the bracket sets, and the frame structure. This research also deals with the relationship between vortical load and horizontal load. Firstly, the examination of the joint and splice methods between the pillar and penetrating ties is on the joint and splice methods of the outer and corner. Through the investigation, it is verified that the joint methods between pillar and penetrating tie on the outer and corner pillars is the method of Sagal joints(cross joints, 사개맞춤). Joints used between pillar and penetrating tie are dovetailed tenon joints, between columns and Anchogong(안초공), between columns and Choikgong(초익공) are tenon joint(장부맞춤). Secondly, the examination of the joint and splice methods of the bracket set is on that of Salmi and Cheomcha(첨차), and Salmi and Janghyeo(장혀). Joints used between Salmi and Cheomcha, Salmi and Janghyeo are halved joint, and between each Janghyeo are stepped dovetailed splice. It is Cheomcha that is used the Jujang-Cheomcha(주장첨차) on center line. Therefore it is connected with each bracket set, which gets to is the strong system, easy and convenient on the construction of that. Thirdly, the frame structure of wooden architecture in royal palace is consist of purlins and beams, Janghyeo(장혀, timber under purlin), tall columns, king posts, etc. Through the investigation, it is verified that the joint and splice methods between purlins and beams are used with the methods of Sungeoteok joint(숭어턱맞춤). It is verified that the joint and splice methods between beams and high columns are used with methods of mortise and tenon joint(장부맞춤), is highly related with tensile force. To reduce the separation of parts, sangi(산지) and tishoi(띠쇠) are used as a counterproposal, which were generally used for architecture in royal Palaces in the late Joseon Dynasty and continued to be used until these days common wooden architecture.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.338-345
• /
• 2005

Recently, surface-wave methods have been widely used for site investigation due to economic advantage and improved reliability. Specially, the Spectral-Analysis-of-Surface-Wave (SASW) method has been used to evaluate soil properties in geotechnical engineering. In determination of subgrade stiffness by SASW measurements, only the vertical Rayleigh waves have been used. This study proposed a framework to determine shear-wave velocity profiles by using vertical and horizontal Rayleigh waves and Love wave all together. In addition, the Common-Array-Profiling(CAP) SASW method was employed, which subgrade stiffness of profile the local material under two fixed receivers. The procedure proposed in this study was verified by comparing the shear-wave velocity profiles with the shear-wave velocity profiles of downhole testing at two geotechnical sites.

• Geomechanics and Engineering
• /
• 제11권4호
• /
• pp.457-469
• /
• 2016

Steep rock slope with water-filled tension crack will happen to overturn around the toe of the slope under seismic loading. This failure type is completely different from the common toppling failure occurring in anti-dipping layered rock mass slopes with steeply dipping discontinuities. This paper presents an analytical approach to determine the seismic factor of safety against overturning for an intact rock mass slope with water-filled tension crack considering horizontal and vertical seismic coefficients. This solution is a generalized explicit expression and is derived using the moment equilibrium approach. A numerical program based on discontinuous deformation analysis (DDA) is adopted to validate the analytical results. The parametric study is carried out to adequately investigate the effect of horizontal and vertical seismic coefficients on the overall stability against overturning for a saturated rock slope under two water pressure modes. The analytical results show that vertically upward seismic inertia force or/and second water pressure distribution mode will remarkably decrease the slope stability against overturning. Finally, several representative design charts of slopes also are presented for the practical application.

• 치과방사선
• /
• 제28권1호
• /
• pp.193-204
• /
• 1998

The purpose of this study was to perform the radiographic measurements and temporomandibular joint evaluation in mandibular asymmetry. For this study, thirty-two patients who have mandibular asymmetry were selected and submentovertex, panoramic and lateral corrected tomographic radiographs were taken. Horizontal and vertical analysis using various landmarks on these radiographs were performed. Also radiographic and clinical evaluation of temporomandibular joint were obtained. The results were as follows ; 1. On the submentovertex radiograph, the mean distance of Pogonion to midline was 5.0±3.8mm. 2. The mean distance of Pogonion to Gonion was 100.6±9.2mm in deviated side and 104.3±9.1mm in contra-lateral side, and there was a significant difference between the deviated and the contra-lateral side (p<0.001). 3. The distance difference of Pogonion to Gonion between the deviated and the contra-lateral side was significantly related to the degree of asymmetry (p<0.001). 4. On panoramic radiograph, the condylar height of the contra-lateral side was significantly longer than the one of the deviated side(p<0.001). 5. On lateral corrected tomogram, bony changes of temporomandibular joint were observed in 11 condyles of the deviated side and 9 condyles of the contra-lateral side. Erosion and osteophyte were the most common changes in both the deviated and the contra-lateral sides.

• Computers and Concrete
• /
• 제23권5호
• /
• pp.329-334
• /
• 2019

Traffic flow capacity of some old road bridges is insufficient due to limited deck width. In such cases bridge deck widening is a common solution. For multi-girder reinforced concrete (RC) bridges it is possible to add steel-concrete composite girders as the new outermost girders. The deck widening may be combined with bridge strengthening thanks to thickening of the existing deck slab. Joint action of the existing and the added parts of such bridge span must be ensured. It refers especially to the horizontal plane at the interface of the existing slab and the added concrete layer as well as to the vertical planes at the external surfaces of the initially outermost girders where the added girders are connected to the existing bridge span. Since the distribution of the added concrete is non-uniform in the span cross-section the structure is particularly sensitive to the added concrete shrinkage. The shrinkage induces shear forces in the aforementioned planes. Widening of a 12 m long RC multi-girder bridge span is numerically analysed to assess the influence of the added concrete shrinkage. The analysis results show that: a) in the vertical plane of the connection of the added and the existing deck slab the longitudinal shear due to the shrinkage of the added concrete is comparable with the effect of live load, b) it is necessary to provide appropriate longitudinal reinforcement in the deck slab over the added girders due to tension induced by the shrinkage of the added concrete.

• 한국운동역학회지
• /
• 제34권1호
• /
• pp.34-44
• /
• 2024

Objective: This study aimed to investigate how the movements occurring during the follow-through phase after releasing an arrow among elite compound archers, are associated with the arrow impact points on the target. Method: Nine elite archers performed consecutive compound archery shooting under conditions identical to actual competitions using their own bows and equipment. Motion capture system and force platform were utilized to record the changes in joint positions and center of pressure, respectively. Principal component analysis was employed to identify the patterns in which multidimensional joint positions and COP changes were organized with horizontal and vertical coordinates of arrow impact points. Subsequently, correlation analysis quantified the relationship between individual variables and the coordinates of arrow impacts on the target. Results: We found a common organizational pattern in which the two axes of the impact point coordinates were grouped into the first two principal components. The movements of the upper and lower limbs following release exhibited opposite patterns in the anterior-posterior axis, with significant correlations observed between the arrow impact points of the horizontal axis and the left shoulder, right elbow, left hip, and both knees. Additionally, the lateral movements induced by the reaction force upon arrow release showed significant associations with the vertical coordinates of the impact points. Particularly, the correlations between the movements of the left shoulder and elbow, as well as the bilateral hip and right knee, were consistently observed among all participants. Conclusion: These findings implied that the post-release movements could significantly influence the trajectory and impact points of the arrows in compound archery. We suggest that a consistent and controlled movement during the follow-through phase may be more beneficial for optimizing shooting accuracy and precision rather than minimizing movements.

• 한국지반공학회논문집
• /
• 제30권9호
• /
• pp.41-55
• /
• 2014

일반적으로 암반 터널 지진해석 시 절리의 영향을 무시하며 암반을 연속체라 가정한다. 하지만 이와 같은 가정의 적절성에 관해서는 연구된 바 없다. 본 연구에서는 응답변위법을 적용하여 지진동에 의하여 유발되는 암반 절리의 변위가 터널의 응답에 미치는 영향을 일련의 개별요소법을 이용하여 수치적으로 규명하였다. 해석에는 절리와 터널의 교차위치, 절리의 강성, 경사, 간격, 그리고 암반과 터널 사이의 인터페이스 강성이 고려되었다. 해석 결과, 절리의 강성이 터널에 가장 지배적인 영향을 미치는 것으로 나타났다. 절리의 간격은 클수록 변위가 국부적으로 집중되어 응답이 증가하는 것으로 나타났다. 절리의 경사는 정적인 경우와는 상반되게 $45^{\circ}$에서 응답이 가장 작게 계산되었다. 이는 전단변형으로 인하여 수직면과 수평면에 큰 전단응력이 작용하여 주응력면이 $45^{\circ}$로 회전하기 때문인 것으로 판단된다. 결과적으로 절리의 경사, 간격, 강성 모두 터널의 응답에 큰 영향을 미치며 특히 간격이 큰 미끈한 수직 또는 수평방향 절리가 터널을 통과하는 경우가 가장 위험한 것으로 나타났다. 또한 터널 라이닝에는 휨응력보다는 전단응력이 큰 폭으로 증가하므로 내진설계 시 이를 반드시 검토해야 할 것으로 판단된다.

• 암석학회지
• /
• 제16권3호
• /
• pp.129-143
• /
• 2007

강화군 석모도 일대의 중생대 화강암 및 세립질 흑운모화강암에서 분포하는 미세균열의 분포특성을 규명하였다. 14개소에서 채취한 암석시료의 수평면 상에서 발달하는 미세균열에 대하여 영상처리를 통하여 구별하였다. 미세균열의 방향성과 석모도의 중생대 화강암에서 발달하는 18조의 절리의 방향성과 대비하였다. 상관도에서 미세균열의 여러 조는 수직상의 일반적인 절리의 방향과 일치하는 강한 배향성을 보여 준다. 이러한 대비의 결과에서 거시적인 절리는 기존 미세균열의 성장 및 계단식 절리작용의 산물의 가능성을 시사한다. 또한 이 연구에서 수행한 방법론에 의하여 도출된 미세균열의 방향성을 전국의 쥬라기 및 백악기 화강암 석산에서 측정된 1번 및 2번 면의 방향성과 상호 대비하였다. 분포도에서 보는바와 같이, 미세균열과 이들 면과의 분포형태가 일치한다는 사실은 전국의 쥬라기 및 백악기 화강암에서도 이와 유사한 미세균열의 계가 광역적으로 나타날 가능성을 시사한다. 각 영역내에 속하는 이들 미세균열의 조들은 다른 지질 과정 및 변화하는 조건하에서 점차 형성된 복잡한 복합적인 미세균열의 계를 구성한다.