• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.320-323
• /
• 2008

In this paper, electro-optical characteristic of Nematic Liquid crystal (LC) with varying temperature in different LCD modes, namely Fringe Field Switching (FFS), In-plane switching (IPS), and Patterned Vertical Alignment (PVA) modes are investigated and compared. Electro optic me asurements suggest that rate of change of transmission with temperature in FFS mode was lowest and much more thermally stable as compared to IPS and PVA m odes. However the electro-optical characteristic of patterned vertical alignment (PVA) mode was most affected by changing temperature. The measured threshold voltage was found to be much more thermally stable in FFS and IPS modes than that of PVA mode.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.725-730
• /
• 2008

In this study, we found out charged particle's deposition characteristic by experiments of $0.5{\mu}m$, $1.0{\mu}m$, $3.0{\mu}m$ size particle's concentration decay. We carried out the experiments on charged particle deposition onto the vertical cleanroom wall panel and some other fundamental experiments. The particle deposition mechanism is consist of sedimentation, convection, diffusion, thermophoresis, electrostatic and so on. Particle size determines mainly working deposition mechanism. The charged particle is made with corona discharge that are constituted field charging and diffusion charging. In addition, this combinational mechanism is called combined charging. The type of corona discharge determines quantity of particle electrical charge. In conclusion, we assumed that quantity of particle electrical charge accelerations deposition velocity onto the vertical cleanroom wall panel and proved it. And we figured out particle's deposition characteristic through compared between our experiment's results.

• 한국전자파학회논문지
• /
• 제21권12호
• /
• pp.1467-1474
• /
• 2010

X 대역에서 능동 위상 배열 레이더에 적용할 수 있는 타일형 능동 송수신 모듈을 구현하였다. 제안한 타일형 구조의 구현을 위한 수직 연결은 fuzz button을 이용한 solderless 방식으로 삽입 손실은 0.6 dB, 반사 손실의 VSWR은 1.7 이하를 만족하며 X 대역에서 약 30 %의 대역폭을 가지는 광대역 특성을 가진다. 광대역 특성을 가지는 수직 연결 구조를 이용하면 수직 연결 시에 발생할 수 있는 부정합을 최소한으로 하여 우수한 이득 평탄도를 가지는 타일형 구조의 송수신 모듈을 구현할 수 있다.

• 국제초고층학회논문집
• /
• 제11권2호
• /
• pp.75-86
• /
• 2022

High-rise buildings often can accommodate the population of small horizontal cities. The investment in high-rise buildings is considerable and therefore a rapid return on investment is necessary. The immediate availability of high-rise buildings can be achieved by automated prefabrication of highly finished modules and their instant on-site assembly by robotic and automated construction sites. A high-rise building as a vertical city can be considered as a sophisticated organism that can constantly change throughout its lifecycle in response to economic growth, demographic change, and environmental pressures. To date, many new urban high-rise developments claim to be "vertical cities", yet few represent this important characteristic. This article analyzed the technological readiness and innovations in the field of construction automation and robotics including single-task construction robots, automated on-site construction factories, and ambient assisted living. These technological advances enable the realization of future vertical cities that are able to continuously grow and transform in terms of form and function. Finally, the article proposes a visionary archetype of vertical city in the name of "dynamic vertical urbanism" that is easy to expand vertically and horizontally in order to achieve instant availability and full life cycle resilience thanks to advanced building technologies.

• 한국환경생태학회지
• /
• 제15권2호
• /
• pp.186-192
• /
• 2001

본 연구는 전라남도 광양만의 6개 임해매립지 식재지반의 토양환경 특성을 조사분석하였다. 토심이 깊어짐에 따른 토양성질의 수직적 특성은 각 식재지반별로 다르게 나타났다. 토양성질의 수직적 특성에 영향을 미치는 요인은 개토와 준설토의 이질서, 토양의 물리. 화학성의 교란, 지반하부에 잔존하는 염류의 이동, 유기물의 이동과 강우나 가뭄 등이었다. 수목생 상 유리한 식재지반은 식재지반의 높이가 낮은 곳보다 높은 성토지역이었으며, 이것은 토양의 물리. 화학적 교란과 지하부의 염류로부터 안전성이 높기때문이었다. 조경식물의 생육상 불리한 토양성질들은 토성의 이질서, 토양의 경화, 알칼리성 염류토양, 높은 ECe, Na, K. 저농도의 Ca, Mg, T-C등이었으며, 이러한 토양성질들은 표토보다는 지하의 근권부에 주로 분포하여 있었다. 따라서 임해매립지 식재지반 조성시에는 토양의 성질이 교란되지 않은 방법이 모색되어야 하며, 조경수목의 생육에 관련된 토양환경조사는 지하근권부 이하까지 정밀하게 조사. 분석하여야 할 것으로 사료되었다. 사료되었다.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2006년 창립20주년기념 정기학술대회 및 국제워크샵
• /
• pp.461-464
• /
• 2006

The caisson of the inner wall type has a weak point that reflecting wave is big. Therefore it has been studied that the research of the decreasing reflecting wave using installation the perforated wall in front of caisson to decrease of that weak point. In this study, we analyzed the characteristic of reflection horizontal and diamond style vertical slit caisson using hydraulic model test. According to the results of experiments, we could confirm that diamond style vertical caisson has a reflection coefficient which has lower than horizontal caisson of the reflection coefficient of 5~10%.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2015년도 제46회 하계학술대회
• /
• pp.742-743
• /
• 2015

Magnetic couplings are do not require any mechanical contact with the power transmitted to the secondary side according to the primary side. For this reason, well-suited for isolated systems such as vacuums or high pressure. So, this paper presents the force characteristic analysis of the permanent magnet (PM) linear coupling with vertical magnetized using an analytical magnetic field calculations. Based on the definition of governing equations and magnetic vector potential, we obtained the analytical solutions according to the boundary condition for each of the regions. Also, we derived from the force generated in the permanent magnet surface using the Maxwell stress tensor. The analytical results are proved the validity by comparing to the finite element method (FEM).

• 의료ㆍ복지 건축 : 한국의료복지건축학회 논문집
• /
• 제10권2호
• /
• pp.125-133
• /
• 2004

Safety, accessibility and distinguishment as the concept of architectural planning and design are demanded in staircases due to increase of the old aged people and disabled people's enlarged social participation. In this research is tried to provide the importance of vertical walking function at the design for the staircases. For this reason, structural elements of the staircases are studied in the ergonomic aspect for barrier-free environment and a comparative study is made on the regulations of the staircases in the inside and outside of the country in disabled & aged people's view. Based on this study, the quality of the staircases in public facilities and Apartments is analyzed. As the result, it has been proved that the vertical walking function of the staircases is the most fundamental characteristic of the staircases design before everything else.

• 한국정보통신학회논문지
• /
• 제7권5호
• /
• pp.872-878
• /
• 2003

본 논문에서는 3D-Ray Tracing 기법을 이용한 옥내 무선통신용 편파발생 시뮬레이터를 개발하고, 실내 무선전파환경에서 실제 측정한 데이터와의 비교를 통하여 검증하였다. 개발된 시뮬레이터를 이용하여 Line-Of-Sight(LOS)와 Non-Line-Of-Sight(NLOS) 무선전파 환경에서 수직, 수평, 원편파에 대한 채널특성과 편파 다이버시티 수신특성을 해석하였다. 그 결과 원편파의 경우 기수회 반사파를 억제 수신하는 특성 때문에 수직 및 수평편파의 경우와 비교하여 다중경로 페이딩이 현저하게 경감됨을 알 수 있었다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 춘계학술대회
• /
• pp.1008-1013
• /
• 2003

This paper concerns the structural characteristic analysis and evaluation on the hydrostatic guide way and feeding system of a high precision centerless grinder for machining ferrules. In order to realize the required accuracy of ferrules with sub-micron order, the axial stiffness and motion accuracy of feeding system have to become higher level than those of existing centerless grinders. Under these points of view, the physical prototype of feeding system consisted of steel bed, hydrostatic guide way and ballscrew feeding mechanism is designed and manufactured for trial. Experimental results show that the axial and vertical stiffnesses of the physical prototype are very low as compared with those design values. In this paper, to reveal the cause of these stiffness difference, the structural deformations on the virtual prototype of feeding system are analyzed based on the finite element method under experimental conditions. The simulated results illustrate that the deformation of front ballscrew support-bearing bracket is the main cause of reduction in the axial stiffness of feeding system, and the deflection of bed structure and the bending deformation of hydrostatic guide rails are the main causes of reduction in the vertical stiffness of feeding system.