연구배경 : 기계적 호흡치료로 부터의 이탈이란 호흡일을 인공호흡기에서 환자에게 되돌리는 과정으로 여러가지 이탈 방법 중 어떤 방법이 더 낫다는 확실한 보고는 없지만 최근의 연구에서는 자가호흡관찰에 의한 이탈시도가 더 낫다는 보고가 있다. 자가호흡관찰에 의한 이탈때도 자가호흡관찰시간에 대한 확실한 의견은 없다. 저자들은 기관내 튜브를 통한 산소공급으로 1시간 자가호흡관찰후 이탈 및 발관을 동시에 시행하는 방법의 유용성에 대해서 발표한 적이 있으면 이번에는 관찰시간을 30분으로 단축하여 성공이 예상되면 다시 인공호흡기 연결없이 바로 발관을 시행하는 적극적인 이탈 방법을 시행하였다. 방 법 : 1994년 8월부터 1995년 7월까지 1년간 호흡부전으로 기계호흡을 받은 환자를 대상으로 하였으며 이탈은 호흡부전을 초래한 기저질환이 호전되고 활력징후들이 안정된 상태로 유지되며 $FiO_2$ 0.4 이하에서 동맥혈 가스분석상 산소분압이 55mmHg 이상인 경우 시도하였다. 이탈기준을 만족하는 대상환자에서 기관내 튜브를 통해 분당 6L 산소를 공급하고 이탈시킨 상태에서 30분 동안 의사가 환자옆에서 환자의 전신상태, 호흡횟수, 맥박수를 고려하여 청색증, 발한, 빈맥, 혈압상승, 혈압저하 등이 없고, 가스분압이 55mmHg 이상으로 유지될 경우 인공호흡기 연결없이 발관을 시행하였다. 인공호흡기 이탈후 48시간 이상 자가호흡이 가능한 경우를 이탈성공으로 정의하였다. 결 과 : 기계적 호흡치료률 받은 42명중 이탈기준을 만족시키는 15명의 환자에게서 총 17회의 이탈을 시행하였다. 이 17회의 30분 자가호흡관찰후 발판을 시행하는 이탈시도 중 14회가 성공하여 82.4%의 성공율을 보였다. 이탈에 성공한 14명의 환자에서 30분간의 호흡관찰후 실제 이탈후 발관까지는 8명이 30분, 3명이 1시간, 3명이 2시간 이상 소요되었다. 결 론 : 이상의 결과로 튜브를 통한 산소공급후 30분 자가호흡관찰에 의한 이탈의 경우도 1시간 자가호흡관찰에서처럼 높은 이탈 성공률을 보이는 쉽고 유용한 방법이다.
페인트제조시설에서 다량 발생하는 VOC/HAPs은 물질별 독성, 발암성 등의 특징으로 미량으로도 인체에 유해할 뿐만 아니라, 하절기 오존 생성과 악취 민원의 원인물질로 작용하고 있어 이들 시설에 대한 배출특성과 제어방안에 대한 연구가 시급한 실정이다. 본 연구에서는 부산지역에 소재한 페인트제조시설 4개소를 선정하여 VOC/HAPs 주 배출공정 및 주요 오염물질을 도출하고 적절한 제어방안을 제시 하였으며, 천연소재인 Kapok fiber의 흡착 시험을 통하여 상용 흡착제로서의 적용 가능성을 평가하였다. 연구결과, 발생되는 VOC/HAPs의 60% 이상이 방지시설로 유입되지 않고 공장내부로 자연 휘발되어 외기로 확산되는 것으로 조사되었고 주요 물질로는 Toluene, Ethylbenzene, Xylene이 70% 이상의 분포를 나타내었다. 주요 악취 원인물질은 A, B, C사는 Toluene, D사는 m/p-Xylene으로 나타났으며, 악취방지시설인 활성탄 흡착시설의 평균 제거효율은 66.2%로 평가되었다. 이 결과를 토대로 오염물질의 외부확산을 최소화하기 위한 방안으로 중앙제어식 환기장치의 설치 등 다양한 제어방안과 함께 실제 운영시설의 규모를 고려한 흡착시설의 규격, 흡착제량, 교체주기 등을 산출 제시하여 현장에 적용 가능하도록 하였다. 도출된 원인물질을 표준시료로 활용하여 유통 활성탄과 천연소재인 Kapok fiber의 Toluene 흡착시험을 실시한 결과, 활성탄의 제거율은 대부분 99% 이상 우수한 것으로 나타났으나 Kapok fiber는 Space Velocity의 차이에 따라 91.9%, 66.7%의 제거효율을 나타내어 Kapok fiber의 흡착능은 미흡한 것으로 나타났으나, 저렴한 소재 가격, 친환경성 등을 감안한다면 기초 흡착제로서의 적용은 가능한 것으로 판단되었고 향후 상용화에 필요한 추가연구가 필요할 것으로 사료된다.
원전 증기발생기 2차측 제철 화학세정을 기존의 93$^{\circ}C$ 표준공정보다 고온인 1$25^{\circ}C$에서 검증시험을 수행하였다. 원전 증기발생기를 1$25^{\circ}C$에서 화학 세정한다는 가정아래 현장세정 조건을 결정하고 이를 다시 모사하여 3l 용량의 소형 검증시험 조건을 결정하였다. 1 gallon 용량의 316 스텐레스강 압력용기를 반응용기로 사용하는 화학세정 시험장치에서 검증시험을 수행하여 스러지 용해거동, 모재 부식률, 세정제 화학조성 변화거동 등을 측정하였다. 1$25^{\circ}C$ 검증시험 결과에서 93$^{\circ}C$ 표준공정보다 세정시간을 절반이하로 단축시키고도 더 효율적인 세정효과를 얻을 수 있을 뿐만이 아니라 2차측 모재의 부식률도 감소함을 확인할 수 있었다. 그러나 고온 세정공정은 아직 현장적용 경험이 없고, 별도의 외부순환 세정 장치를 이용하는 93$^{\circ}C$ 표준공정과는 달리 주냉각재의 잠열로 2차측을 가열하므로 세정이 완료될 때까지 주냉각 펌프를 계속 가동하여야 하는 단점이 있다. 가동중인 증기발생기에 대한 화학세정을 수행할 때 93$^{\circ}C$ 표준공정과 고온공정의 장 단점을 신중히 검토하여 최적공정을 적용하여야 할 것이다.
연구배경: 압력보조환기로 이탈시 발판 시기는 최소보조압력수준에서 시행하는 것이 추천되고 있다. 그러나 임상에서는 압력보조환기법에 의한 이탈시 기관내 관의 발관을 최소압력보조법에 도달하였다고 판단되는 경우에서도 기관내 관의 재삽관 가능성을 줄이기 위하여 때로는 T-piece 시도를 1 시간 더한 뒤 기관내 관을 제거하는 방법도 시행되고 있다. 이는 환자의 호흡예비력을 좀더 확실하게 검증할 수 있는 장점이 있는 반면, 기관내 관 자체가 높은 기도 저항을 유발하므로 환자의 호흡 일이 증대되어 오히려 이탈이 지연될 가능성도 있다. 본 저자들은 최소압력보조치에서 1 시간 T-piece 추가가 이탈에 어떤 영향을 미치는지 알아보고자하였다. 연구방법: 1997년 5월부터 1998년 3월까지 서울중앙병원 내과계 중환자실에서 이탈을 시도한 44명을 대상으로 무작위 전향적 연구를 시행하였다. 이탈 대상이 되는 환자는 모두 압력보조환기방법으로 이탈을 진행하고 압력보조수준이 최소압력보조치에 이르면 환자를 무작위로 실험군 (1시간 T-piece 시도)과 대조군(즉시 발관)으로 나누었다. 연구결과: 전체 42회 이탈의 최소압력보조치는 7.6 [${\pm}1.9$, (4-13)] cm $H_2O$였다. 1. 환자들의 기저 상태 : 두 군간 환자들의 총 기계환기 시간, APACHE III 접수, 영양지표, 분당 호흡수, 얕은 숨지수, 호흡, 일 등에서 차이가 없었다. 2. 두 군간 성공률 및 호흡역학의 차이 : 실험군이 55%, 대조군이 70%로 즉시 발관한 군이 성공률이 높으나 통계학적 차이는 없었다 (p>0.05). 재삽관률도 실험군이 18%, 대조군이 20%로 두 군간 차이가 없었다. 실험군에서 1시간 T-piece 시도후 일회호흡 용적, 분당 호흡수, 얕은 숨지수, 호흡 일에서 악화된 소견을 보였으며(P<0.05), 특히 실험군내의 실패군에서는 일회호흡용적, 호흡 일, 압력시간곱의 악화가 심하였다 (P<0.05). 3. 성공군과 실패군 분석 : 전체 성공군에서 총 기계환기 시간이 유의있게 낮았고 ($246{\pm}195$ 시간 대 $407{\pm}248$ 시간, P<0.05), 일회호흡용적은 유의하게 높았다 ($0.43{\pm}0.11$ L 대 $0.35{\pm}0.10$ L). 결 론: 이상의 결과로서 최소압력보조치에서 1 시간 T-piece 추가는 환자의 호흡 일을 증가시키며 이탈 성공률에 있어 최소압력보조치에서 즉시 발관하는 방법에 비하여 차이가 없으므로 압력보조환기 양식으로 이탈을 시도할 때는 최소압력보조치에서 즉시 발관하는 것이 나을 것으로 사료된다.
This study was performed to investigate the sanitation management and the sanitation knowledge of managers in military foodservice by questionnaires and inspection of foodservice facilities. Thirty managers working in military foodservice were given questionnaires and the related facilities located in the northern part of Kyeongki-Do, Korea were inspected. Most of the facilities(76.%) were built more than ten years ago, they are now decreptit and the internal temperature was high with poor ventilation in the kitchen. An education program on sanitation was conducted less than four times a month (63.3%) while the education materials and resources from the upper-unit(80%) along with their self-renewment of data was poor(once a month, 60%). In the sanitation knowledge examination, the percentage of correct answers were 76% in terms of facilities, 72% in terms of personal sanitation, 71% in terms of receiving and storage, 63% in terms of the environment and 57% in terms of the cooking process. The results of this study suggest that the modernization of foodservice facilities and equipment, along with additional sanitation machinery and equipment, a guaranteed working environment and upgraded sanitation education will be required to improve the sanitation management in military foodservice.
This paper proposes the optimal design of stator shape for cogging torque reduction of single-phase brushless DC (BLDC) motor with asymmetric notch. This method applied size and position of asymmetric notches to tapered teeth of stator for single-phase BLDC motor. Which affects the variation of the residual flux density of the permanent magnet. The process of optimal design included the extraction of the sampling point by using Latin Hypercube Sampling(LHS), and involved the creation of an approximation model by using kriging method. Also, the optimum point of the design variables were discovered by using the Genetic Algorithm(GA). Finite element analysis was used to calculate the characteristics analysis and cogging torque. As a result of finite element analysis, cogging torque were reduced approximately 39.2% lower than initial model. Also experimental result were approximately 38.5% lower than initial model. The period and magnitude of the cogging torque were similar to the results of FEA.
본 연구에서는 빛 감성친화형 콘크리트에 광촉매를 적용하여 대기질 및 실내공기질을 개선하기 위한 LEFC 블록을 개발하고자 하였다. LEFC에 광촉매를 적용하게 되면 자외선 입사면 반대편에서도 투과로 인한 자외선이 존재하여 광촉매가 반응함으로써 일반 건축 자재를 적용한 경우보다 광촉매 반응효율이 크게 상승한다. 따라서 광촉매를 LEFC에 적용하기 위해 슬럼프, J-ring, L-box 테스트를 통한 자기충전성능을 평가하여 최적 배합을 결정하였고, 압축 및 휨 강도 시험을 통해 역학성능을 평가하였다. 그리고 TiO2 분포도를 확인하기 위해 SEM과 EDS 분석을 실시하였다. ALC골재와 단열재 적용으로 광촉매 사용량을 줄이고 단위중량을 감소시키는 방안을 활용하여 광촉매 효율을 증가시키는 빛투과 콘크리트 블록을 제작하였고, 향후 건조수축 등의 문제점 개선 및 NOx 제거 실험을 통한 LEFC 블록 성능 평가를 진행하고자 한다.
Kim, Ho-Hyun;Lim, Young-Wook;Yang, Ji-Yeon;Shin, Dong-Chun
한국대기환경학회지
/
제25권5호
/
pp.382-391
/
2009
The aim of the study was to assess the levels in typical central borough of phthalate exposure by monitoring children's facilities (19 kindergartens and 21 elementary schools) and households (17 old apartments and 22 new apartments) via sampling indoor floor dust. A vacuum cleaner specifically prepared for sampling dust was attached to a filter of a vacuum cleaner dust collecting container. During the sample preparation process, containers made of glass were used and analysis was performed using GC-MSD. The mean concentration of DEHP was $412{\mu}g/g$, DnBP was $24{\mu}g/g$, and BBzP was $10{\mu}g/g$ dust. The indoor characteristics including floor, wall materials, years after construction, water leakage history for the past three years, and ventilation were also examined to categorize phthalate esters from the dust samples. From the flooring and wallpaper materials of kindergartens and elementary schools, DEHP in the dust sample appeared at a statistically significant level (p<0.05) when PVC materials were present. DEHP in the indoor dust also increased significantly (p<0.01) during the construction period. The daily intake of DEHP measured from indoor dust was 0.08~$19.7{\mu}g/kg/day$ for children and 0.02~$1.1{\mu}g/kg/day$ for adults (women). The results clearly revealed that phthalate exposure is greater in children than in adults (women) due to the indoor dust.
Metal fume fever has been known as an occupational disease is induced by intense inhalation of fresh metal fume with a particle size smaller than $0.5{\mu}m\;to\;1{\mu}m$. The fumes originate from heating metals beyond their boiling point, as happens, for example, in welding operations. Oxidation usually accompanies this process. In most cases, this syndrome is due to exposure to zinc oxide fumes; however, other metals like copper, magnesium, cadmium, manganese, and antimony are also reported to produce such reactions. Authors report a case of metal fume fever suspected to be associated with copper fume inhalation. The patient was a 42-year-old male and was a smoker. He conducted inert gas tungsten arc welding on copper-coated materials without safety precautions such as a protective mask and adequate ventilation. Immediately after work, he felt metallic taste in his mouth. A few hours after welding, he developed headache, chilling sensation, and chest discomfort. He also complained of myalgia, arthralgia, feverish sensation, thirst, and general weakness. Symptoms worsened after repeated copper welding on the next day and subsided gradually following two weeks. Laboratory examination showed a transient increase of neutrophil count, eosinophilia, elevated erythrocyte sedimentation rate, and positive C-reactive proteinemia. Blood and urine copper level was also increased compared to his wife. Before this episode, he experienced above complaints several times after welding with copper materials but welding of other metals did not produce any symptoms. It was suggested that copper fume would have induced metal fume fever in this case. Further investigations are needed to clarify their pathogenic mechanisms.
In the process of modermization the problem of environment destruction has become a worldwide issue. And now this problem is a concern for all branches of science, including that of architectural desigv. This thesis tries to find the meaning of ecological architectural space, one that encreases the organic relationship, and communication, between architectrual space and urban environmental space, between human beings and architecture, and between human beings and their environment. As an example, we will take a look at the architectural space-design of Frei Otto, who offers diverse creative ecological architectural forms. His concept of architecture has the critical character when compared with the traditionan conventional concept of architecture. The ecological characteristics of his architectural spacedesign can be summarized as follows: The first characteristic is his ample use of natural objects in the architectural structure. An ample use of living things like trees and plants as well as of inanimate thing like water, wind as architectural elements enhances the functional efficiency of architecture. The second characteristic is its ecological architectural system, which saves energy faciliates ventilation by changing the position and direction of the building, by systematically applying the materials, and by efficiently arranging the inner space. The third characteristic is the dematerialization of architecture and the use of materials that are economical and appropriate for the circulation system of nature. The use of natural elements and recycling natural objects, makes it possible to reuse materials of the destroyed building. In short, the ecological architecture of Frei Otto, which shows the relation between human beings and architecture, presents diverse possibilities of the archtectural space as a complex natural system, which is more than a simple combination of separatge elements.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.