• 한국주조공학회지
• /
• 제17권4호
• /
• pp.379-384
• /
• 1997

Al-15Cu-lMg alloys have been directionally solidified in 3mm diameter alumina tubes under the conditions of $760^{\circ}C$ of furnace temperature and 12 cm/hr of furnace moving velocity(V). By analyzing the evolution of the temperature profiles along the alloy length, the position of the solid/liquid interface, temperature gradient(G) and local growth velocity (R) were determined. These growth characteristics were compared for 6, 10, 14 cm length alloys. Steady state growth region was obtained in 15 cm length alloy, not in 6, 10 cm.

• 천문학회지
• /
• 제53권3호
• /
• pp.77-85
• /
• 2020

In the molecular cloud G33.92+0.11A, massive stars are forming sequentially in dense cores, probably due to interaction with accreted gas. Cold dense gas, which is likely the pristine gas of the cloud, is traced by DCN line and dust continuum emission. Clear chemical differences were observed in different source locations and for different velocity components in the same line of sight. Several distinct gas components coexist in the cloud: the pristine cold gas, the accreted dense gas, and warm turbulent gas, in addition to the star-forming dense clumps. Filaments of accreted gas occur in the northern part of the A1 and A5 clumps, and the velocity gradient along these features suggests that the gas is falling toward the cloud and may have triggered the most recent star formation. The large concentration of turbulent gas in the A2 clump seems to have formed mainly through disturbances from the outside.

• Korean Chemical Engineering Research
• /
• 제50권6호
• /
• pp.1021-1026
• /
• 2012

단일 액적 시스템에서의 비정상상태 물질 전달에 대한 연구를 진행하였다. 단일 액적계를 위한 이성분계로는 옥탄올(연속상)-물(분산상) 시스템이 이용되었으며 동반되는 불균일 반응으로는 아민추출제(tri-n-octylamine,TOA)를 이용한 숙신산 추출 반응을 모델 시스템으로 선정하였다. 점도, 밀도, 용질의 분배계수, 연속상에서 하강하는 액적의 종말 속도, 용질과 추출제의 확산계수 등과 같은 시스템의 기본 특성을 파악하기 위한 실험과 이론적 계산들이 수행되었다. 액적의 종말 속도는 숙신산 농도에는 크게 영향을 받지 않는 것으로 보이나 TOA가 없을 때는 숙신산 농도에 따라 약간 증가하는 경향을 보였고, TOA 농도 증가와 함께 감소하였다. 액적의 낙하는 수직 낙하 경로를 기준으로 좌우로 진동하면서 움직이는 경향을 보였다. 낙하하는 액적에서의 물질 전달 관찰을 위해 물질 전달 셀을 제작하여 시간에 따른 액적 내의 평균 농도 변화를 관찰하였고, 그 결과를 무차원 변수를 이용하여 해석하였다. 50 g/L의 숙신산 농도 조건하에서 TOA 농도를 0.1과 0.5 mol/kg 으로 조절하였을 때, 전자의 경우에는 관찰 시간 범위 내에서 일정한 Sh 값을 유지하여 용질의 이동 방향으로의 농도 기울기가 감소함에 따라 훌럭스도 그에 비례하여 감소함을 알 수 있었지만, 후자의 경우에는 시간의 경과와 함께 Sh가 급격히 증가하는 현상을 보여 계면에서의 숙신산 훌럭스 감소에 비해 농도기울기 감소가 상대적으로 빠르게 일어남을 알 수 있다.

• 한국식품영양과학회지
• /
• 제23권3호
• /
• pp.459-465
• /
• 1994

Performance of a continuous cocurrent supercritical fluid extraction column for processing of anhydrous milk fat (AMF) was determined. The extract loading increased and the extraction yield decreased as the superficial velocity of AMF increased. The maximum solubility of AMF in $CO_2$ at 4$0^{\circ}C$/3,500 psig was 0.0195g/g. The increase of the carbon dioxide density enhanced the solubility of milk fat and decreased the cholesterol concentration in the extract. Three operation conditions, such as recycle , reflux, and temperature gradient of extraction column, were tested. More short-chain fatty acvids were extracted by the reflux operation . Longchain fatty acids and thehighest ratio fo long-chain unsaturated to saturated fatty acids were also obtained in the raffinate phase with refluex.

• 한국재료학회지
• /
• 제30권12호
• /
• pp.678-686
• /
• 2020

Microstructural characteristics of directionally solidified René 80 superalloy are investigated with optical microscope and scanning electron microscope; solidification velocity is found to change from 25 to 200 μm/s under the condition of constant thermal gradient (G) and constant alloy composition (Co). Based on differential scanning calorimetry (DSC) measurement, γ phase (1,322 ℃), MC carbide (1,278 ℃), γ/γ' eutectic phase (1,202 ℃), and γ' precipitate (1,136 ℃) are formed sequentially during cooling process. The size of the MC carbide and γ/γ' eutectic phases gradually decrease with increasing solidification velocity, whereas the area fractions of MC carbide and γ/γ' eutectic phase are nearly constant as a function of solidification velocity. It is estimated that the area fractions of MC carbide and γ/γ' eutectic phase are determined not by the solidification velocity but by the alloy composition. Microstructural characteristics of René 80 superalloy after solid solution heat-treatment and primary aging heat-treatment are such that the size and the area fraction of γ' precipitate are nearly constant with solidification velocity and the area fraction of γ/γ' eutectic phase decreases from 1.7 % to 0.955 %, which is also constant regardless of the solidification velocity. However, the size of carbide solely decreases with increasing solidification velocity, which influences the tensile properties at room temperature.

• 천문학회보
• /
• 제35권1호
• /
• pp.74.1-74.1
• /
• 2010

We have investigated the radial g-r color gradients of early-type galaxies in the Sloan Digital Sky Survey (SDSS) DR6 in the redshift range 0.00$H{\beta}$ absorption-line strengths and/or emission-line ratios that are indicative of the presence of young stellar populations. This implies that most of the residual star formation in early-type galaxies is centrally concentrated. Blue-cored galaxies are predominantly low-velocity dispersion systems. A simple model shows that the observed positive color gradients are visible only for a billion years after a star formation episode for the typical strength of recent star formation. The observed effective radius decreases and the mean surface brightness increases due to this centrally concentrated star formation episode. As a result, the majority of blue-cored galaxies may lie on different regions in the fundamental plane (FP) from red-cored ellipticals. However, the position of the blue-cored galaxies on the FP cannot be solely attributed to recent star formation but requires substantially lower velocity dispersion. We conclude that a low-level of residual star formation persists at the centers of most of low-mass early-type galaxies, whereas massive ones are mostly quiescent systems with metallicity-driven red cores.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1061-1064
• /
• 2008

A completion of settling process takes a lot of time for dredged materials of high moisture content, such as contaminated sludge, in landfill site. In general, additives (e.g. flocculants) are used for reducing settling time of such colloidal material, which results in the increase of sludge volume, and hence much space is required in landfill site. This study is to suggest alternative method in order to enhance the settling process of cohesive clayey soils. A number of gravitational sedimentation tests as well as electrokinetic experiments were conducted to investigate the variation of initial moisture content on the settling behaviour of clay slurry. Surface settlement, electric current and local voltage gradient were monitored during the experiment, and moisture content and soil pH were measured after the experiment. From the results, the application of electrokinetics was found to be effective in volume reduction (i.e. increase of settling velocity and decrease of final moisture content) by comparison with gravitational settling process.

• Geomechanics and Engineering
• /
• 제37권5호
• /
• pp.475-498
• /
• 2024

The prediction of the susceptibility of soil to liquefaction using a limited set of parameters, particularly when dealing with highly unbalanced databases is a challenging problem. The current study focuses on different ensemble learning classification algorithms using highly unbalanced databases of results from in-situ tests; standard penetration test (SPT), shear wave velocity (V_s) test, and cone penetration test (CPT). The input parameters for these datasets consist of earthquake intensity parameters, strong ground motion parameters, and in-situ soil testing parameters. liquefaction index serving as the binary output parameter. After a rigorous comparison with existing literature, extreme gradient boosting (XGBoost), bagging, and random forest (RF) emerge as the most efficient models for liquefaction instance classification across different datasets. Notably, for SPT and V_s-based models, XGBoost exhibits superior performance, followed by Light gradient boosting machine (LightGBM) and Bagging, while for CPT-based models, Bagging ranks highest, followed by Gradient boosting and random forest, with CPT-based models demonstrating lower G_mean(error), rendering them preferable for soil liquefaction susceptibility prediction. Key parameters influencing model performance include internal friction angle of soil (ϕ) and percentage of fines less than 75 µ (F₇₅) for SPT and V_s data and normalized average cone tip resistance (q_c) and peak horizontal ground acceleration (a_max) for CPT data. It was also observed that the addition of V_s measurement to SPT data increased the efficiency of the prediction in comparison to only SPT data. Furthermore, to enhance usability, a graphical user interface (GUI) for seamless classification operations based on provided input parameters was proposed.

• 한국터널지하공간학회 논문집
• /
• 제19권2호
• /
• pp.213-229
• /
• 2017

최근 도심지 터널은 진출입 Ramp를 포함한 다양한 형태의 네트워크형 터널이 건설되고 있다. 더불어 터널환기 해석을 위한 다양한 네트워크 이론 기반의 1D 프로그램들이 개발되고 있다. 본 연구에서는 비 hardy-cross 법에 기초한 네트워크형 터널에 대한 풍량 및 농도해석이 가능한 프로그램을 개발하였다. 터널 구간내 풍량해석은 Gradient 법에 기초하고 있으며, 농도해석을 위하여 복잡한 네트워크 구조에서 유입과 유출농도를 자동계산 할 수 있는 로직을 개발하였고, 저속풍량구간에서는 수치해석적 오차를 축소시키기 위한 적정 그리드 간격을 제시하였다. 또한, 프로그램의 적정성을 검증하기 위해, 일자형 터널을 대상으로 고전적인 Sokic의 풍속 선도법 및 TVSDM 프로그램과의 풍속비교검증을 수행하였으며 오차율은 1% 이하였다. 또한 최근 건설되는 도심지 터널에 적용중인 최신 환기방식에 대한 네트워크 환기해석을 수행하였다.

• Korea-Australia Rheology Journal
• /
• 제20권4호
• /
• pp.189-196
• /
• 2008

The pulsatile flow of blood through a stenosed artery under the influence of external periodic body acceleration is studied. The effect of non-Newtonian nature of blood in small blood vessels has been taken into account by modeling blood as a Casson fluid. The non-linear coupled equations governing the flow are solved using perturbation analysis assuming that the Womersley frequency parameter is small which is valid for physiological situations in small blood vessels. The effect of pulsatility, stenosis, body acceleration, yield stress of the fluid and pressure gradient on the yield plane locations, velocity distribution, flow rate, shear stress and frictional resistance are investigated. It is noticed that the effect of yield stress and stenosis is to reduce flow rate and increase flow resistance. The impact of body acceleration is to enhance the flow rate and reduces resistance to flow.