• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2008년도 제7회 추계학술대회 및 정기총회
• /
• pp.625-628
• /
• 2008

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권5호
• /
• pp.2338-2356
• /
• 2019

Vehicular ad-hoc network (VANET) is the name of technology, which uses 'mobile internet' to facilitate communication between vehicles. The aim is to ensure road safety and achieve secure communication. Therefore, the reliability of this type of networks is a serious concern. The reliability of VANET is dependent upon proper communication between vehicles within a given amount of time. Therefore a new formula is introduced, the terms of the new formula correspond 1 by 1 to a class special ST route (SRORT). The new formula terms are much lesser than the Inclusion-Exclusion principle. An algorithm for the Source-to-Terminal reliability was presented, the algorithm produced Source-to-Terminal reliability or computed a Source-to-Terminal reliability expression by calculating a class of special networks of the given network. Since the architecture of this class of networks which need to be computed was comparatively trivial, the performance of the new algorithm was superior to the Inclusion-Exclusion principle. Also, we introduce a mobility metric called universal speed factor (USF) which is the extension of the existing speed factor, that suppose same speed of all vehicles at every time. The USF describes an exact relation between the relative speed of consecutive vehicles and the headway distance. The connectivity of vehicles in different mobile situations is analyzed using USF i.e., slow mobility connectivity, static connectivity, and high mobility connectivity. It is observed that $p_c$ probability of connectivity is directly proportional to the mean speed ${\mu}_{\nu}$ till specified threshold ${\mu}_{\tau}$, and decreases after ${\mu}_{\tau}$. Finally, the congested network is connected strongly as compared to the sparse network as shown in the simulation results.

• 한국ITS학회 논문지
• /
• 제7권6호
• /
• pp.63-69
• /
• 2008

RF 송수신기 설계 분야에서 활발하게 연구하고 있는 융복합 단일칩 설계 기술은 차내 무선망을 위한 차량 무선 단말기에도 적용 가능하며, 이의 실현을 통하여 좀 더 경제적이고 소형화된 차내 융복합 시스템을 구현할 수 있다. 제안된 광대역 전압제어 발진기는 차내 무선망에 사용할 수 있는 표준인 CDMA, PCS, GSM850, 끌림, WCDMA, WLAN, Bluetooth, WiBro, S-DMB, DSRC, GPS, DVB-H/DMB-T/H(L Band) 등의 주파수 대역을 만족시킬 수 있도록 제안된 frequency planning을 따른다. 또한, cross-coupled된 트랜지스터 한 쌍과 MOS varactor에 PMOS를 채택함과 동시에, capacitor array에서는 differential 스위칭을 사용함으로써 위상잡음을 개선하였다. 측정결과, $5.3{\sim}6.0\;mW$의 전력을 소모하며, 주파수 대역은 $4.05{\sim}5.62\;GHz$ (33%의 tuning range)이고 위상잡음은 1 MHz의 offset 주파수에서 -117.16 dBc/Hz이며 이때 figure of merit (FOM)은 $180.5{\sim}180.8$이다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권2호
• /
• pp.946-959
• /
• 2018

Recently interest in Internet of Things(IoT) has attracted significant attention at national level. IoT can create new services as a technology to exchange data through connections among a huge number of objects around the user. Data communication between objects provides not only information collected in the surrounding environment but also various personalized information. IoT services which provide these various types of data are exposed to numerous security vulnerabilities. If data is maliciously collected and used by an attacker in an IoT environment that deals with various data, security threats are greater than those in existing network environments. Therefore, security of all data exchanged in the IoT environment is essential. However, lightweight terminal devices used in the IoT environment are not suitable for applying the existing encryption algorithm. In addition, IoT networks consisting of many sensors require group communication. Therefore, this paper proposes a secure multicast scheme using the proxy re-encryption method based on Vehicular ad-hoc networks(VANET) environment. The proposed method is suitable for a large-scale dynamic IoT network environment using unreliable servers.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2012년도 춘계학술논문집 2부
• /
• pp.481-485
• /
• 2012

차량 통신 네트워크(VANET, Vehicular Ad Hoc Network)는 운전자 안전 정보 및 ITS(Intelligent Transp ortation System) 서비스를 지원하기 위해 IEEE 1609.4와 IEEE 802.11p를 활용한다. 그러나 차량 노드들의 숫자가 증가할 경우에는 트래픽 경합 문제(Traffic Contention Problem), 숨은 터미널 문제(Hidden Terminal Problem), 전송 지연 문제, 경합으로 인한 패킷 손실 문제, 처리량 감소 문제, MAC의 동적 채널 할당 방법 등 많은 문제점이 발생한다. 따라서 본 논문에서는 IEEE 1609.4와 IEEE 802.11p 기반 차량 통신 네트워크의 특징을 살펴봄으로써 기존 제안되었던 차량 통신 네트워크를 위한 MAC 및 멀티채널 기술의 특징의 장단점을 분석한다. 또한 분석된 문제점을 해결하기 위한 연구 방향을 제시한다.

• Journal of Power Electronics
• /
• 제16권1호
• /
• pp.217-226
• /
• 2016

A new method is proposed based on a hidden Markov model (HMM) to estimate and analyze battery states of health. Battery system health states are defined according to the relationship between internal resistance and lifetime of cells. The source data (terminal voltages and currents) can be obtained from vehicular battery models. A characteristic value extraction method is proposed for HMM. A recognition framework and testing datasets are built to test the estimation rates of different states. Test results show that the estimation rates achieved based on this method are above 90% under single conditions. The method achieves the same results under hybrid conditions. We can also use the HMMs that correspond to hybrid conditions to estimate the states under a single condition. Therefore, this method can achieve the purpose of the study in estimating battery life states. Only voltage and current are used in this method, thereby establishing its simplicity compared with other methods. The batteries can also be tested online, and the method can be used for online prediction.

• 전기학회논문지
• /
• 제57권2호
• /
• pp.276-285
• /
• 2008

These days the automobile industry, which has rapidly progressed, has been an indispensable part in social and economic activities as well as its research and development have been activated in response to various needs of consumers and markets. The second and third generation control system, getting count on safety and convenience differently than early circuits, cause the hypertrophy of wire harness. The J/Box(Junction Box), which distributes power and wires, was developed to solve the problem. As vehicles have been better in quantity and intelligence, however, environment-friendly electric apparatus system has continuously increased and ITS(Intelligent Transport System) has been introduced in earnest. In result, wires got complicated and multilateral and also there has been a stronger probability that vehicles are out of order due to various problems including mechanical failure. In this study, ISJB(Intelligent Smart Junction Box) was introduced to solve the problem. The diagnosis system was applied to prevent the overload and short of ISJE. Also, the state of vehicles displayed so that drivers monitor it in motion. Likewise error data are saved in the memory so that such data can be analyzed retrospectively. The busbar was adopted in to the main power terminal and the part of power pattern was coverd by lead. Because ISJB is more sensitive to heat in comparison to the busbar type J/Box. With regard the circuits related with safe, alternative circuits were set up in order that electronic devices may be normally operated even when an error arises. ISJB is expected to improve the safety and quality of vehicles.