• 제목/요약/키워드: vehicular load model

검색결과 14건 처리시간 0.02초

악천후에 대한 고무차륜 AGT 경량전철의 안전 운행속도 (Speed Limitations of the Rubber-Tired AGT Light Rail Vehicle for Inclement Weather)

  • 김연수;박성혁;백남욱
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 2003년도 춘계학술대회 논문집
    • /
    • pp.1533-1536
    • /
    • 2003
  • Dynamic model of the rubber-tired AGT light rail vehicle. various load and boundary conditions between vehicle and infrastructures(running track. guidance rail) were defined to analyze vehicular dynamic behaviors occurred by inclement weather(strong wind and earthquake). The dynamic analysis were performed by using a commercialized software RecurDyn. whose results for the magnitudes of wind and earthquake showed the resultant forces and accelerations between car body and bogie, or bogie guidance frame and infrastructures in the various track conditions(straight or curved tracks) and train velocities. Based on these results, speed limitation of tile vehicle were proposed to ensure system stability and passengers safety.

  • PDF

연성포장의 3차원 유한요소해석을 위한 최적 경계조건 분석 (Appropriate Boundary Conditions for Three Dimensional Finite Element Implicit Dynamic Analysis of Flexible Pavement)

  • 유평준;;김연복
    • 한국도로학회논문집
    • /
    • 제10권4호
    • /
    • pp.213-224
    • /
    • 2008
  • 트럭 축하중에 의한 도로포장체의 응력과 변형은 대부분 다층 탄성 이론에 의해 예측된다. 대부분의 다층 탄성 이론에 의한 이론적 계산값이 연성 포장 재료의 점탄성적 거동특성, 동적 트럭 축하중, 비균등 타이어 접지압 및 형상등을 해석에 고려하지 못하므로, 계측값에 비해 매우 작은 값을 예측하므로서 도로 포장 두께설계가 과소 설계될 우려가 크다. 이와 같은 도로 포장체 구조해석시 이용되는 중요한 변동요소를 포장 재료의 물성 모델 측면, 비균등 접지압 및 형상 측면, 동적 유한요소해석 측면에서 분석하여 이용 가능한 모델을 본 논문에서 제안하였다. 경계조건 및 민감도 분석을 수행을 통한 효과적인 3차원 연성포장의 유한요소해석모델을 결정하는 방법론을 제안하였으며, 최적 유한요소모델 분석결과와 현장에서 취득한 결과와의 상호비교를 통하여 모델의 유의성을 검증하였으며, 동적 접지하중조건, 점탄성물성 모델 등을 3차원 유한요소 모델에 접목하고, 최적 경계조건을 결정하였다.

  • PDF

타이어 종류 (Wide Base Tire and Dual Tire Assembly)에 따른 아스팔트 포장 반응 평가 (Evaluation of Pavement Responses under Wide Base Tire and Dual Tire Assembly)

  • 조성환;임정혁
    • 한국도로학회논문집
    • /
    • 제16권2호
    • /
    • pp.61-71
    • /
    • 2014
  • PURPOSES : The first generation of wide base tires introduced in the early 1980s was found to cause a significant increase in pavement damage compared to dual-tire assemblies. However, wide base tires have evolved considerably, and a new generation of wide base tire is thought to be comparable to conventional dual tires for pavement damage. A challenge associated with using wide base tires is the accurate quantification of pavement damage induced by these tires. The objective of this study was to investigate the responses of flexible pavement to continuously moving vehicular loading under various tire configurations. METHODS : The comparison of the strain/stress responses of full-depth pavement caused by conventional dual tire assembly and new generation of wide-base tires was performed. The FE model incorporates linear viscoelasticity of asphalt material and continuous moving load using implicit dynamic analysis. RESULTS AND CONCLUSIONS : The result demonstrates that the new wide-base tires caused slightly more fatigue damage and less primary rutting damage in HMA layer than a dual-tire assembly, but caused more secondary rutting damage in subgrade than a dual tire assembly.

차량의 이동하중을 고려한 연성포장의 수치해석 기법 연구 (A Study on Numerical Analysis of Flexible Pavements under Moving Vehicular Loads)

  • 박석순;김낙석
    • 한국재난정보학회 논문집
    • /
    • 제7권3호
    • /
    • pp.206-219
    • /
    • 2011
  • 포장 설계기준에서 중요한 요인은 응력과 변형률 분포도이다. 합리적인 응력과 변형률 분포도를 달성하기 위한 차량타이어의 접촉면적과 공기압은 매우중요하다. 본 연구에서는 이동하중 하에서 연성포장의 점탄성 특성에 관한 내용을 다루고 있으며 현장 측정시험을 통하여 실제 도로의 종횡변형률을 수치해석 결과와 비교분석 하였다. 포장거동에 대한 차량이동하중의 영향을 적절히 모사하기 위하여 단계하중을 이용한 3차원 유한요소 해석이 수행되었다. 점탄성 해석을 위하여 아스팔트 혼합물의 이완계수, E(t), 가 실험실에서 제작된 시료의 실험으로부터 측정되었다. 현장조사 결과에 의하면, 종횡변형률은 서로 상이한 값을 보였으며 전반적으로 변형률의 크기는 차량의 속도가 증가함에 따라 감소함을 보였다. 전반적으로 횡방향 변형률은 종방향 변형률에 비하여 작은값을 보였으며 그 차이는 횡방향에서 더욱 두드러진 경향을 보였다.