• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.2
• /
• pp.237-244
• /
• 2011

Vehicular communications extend their application areas by combining communication technologies with roads/vehicles, and one of major applications is Smart Highway project. Smart Highway is a new advanced highway system which enhances the current highway system in Korea by improving reliability, safety and convenience. In this paper, we introduce wireless access technologies for vehicular communications especially focusing on Smart Highway. We first introduce the overall communication system architecture and the basic service and communication requirements for Smart Highway. Then, we discuss wireless access technologies including L2-level hand-over scheme. In addition, the results of experimental measurements of Wireless Access in Vehicular Environments (WAVE) system are introduced.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.33-39
• /
• 2017

In mission-critical applications such as vehicular networks, distributed robotics, and other cyber-physical systems, the requirements for latency are more stringent than traditional applications. Among them, autonomous V2V communication is a rapidly emerging domain of applications with a few milliseconds' latency requirements. Today's systems utilizing 802.11p or LTE-direct standards are not primarily designed for ultra-low latency. Because the medium access function contributes to a significant portion of the total latency, it is necessary to modify Layer2 in order to solve the problem. Focusing on MAC layer, we developed a scalable and latency-guaranteed MAC by devising Autonomous TDMA (ATDMA) in which autonomous joining/leaving is allowed without scheduling by coordinator. We also evaluated the performance of the algorithm by comparing with the WAVE protocol.

• IEMEK Journal of Embedded Systems and Applications
• /
• v.11 no.1
• /
• pp.29-37
• /
• 2016

We propose vehicular spread spectrum (SS) radar robust to mutual interference using zero correlation zone (ZCZ) code. SS radar schemes have been employed for vehicular radar systems due to their outstanding correlation property. However, this superiority is based on a premise that timing among codes is completely synchronized. In the practical driving environment, timing mismatch among radar signals is inevitable because the radar signals of several vehicles are independently transmitted at each different location and each timing and thus each radar signal is received at different timing. This timing offset is the main cause of orthogonality destruction among codes and thus radar signals from other vehicles become mutual interference. In order to solve this problem, we find out the new property of ZCZ code which maintains the complete orthogonality except to timing offset corresponding to chips (pulses) of multiple of 4 and employ ZCZ code to SS radar systems. Simulation results show the proposed scheme achieve better performance compared with the conventional SS radar scheme using pseudo code or gold code.

• Korea Multimedia Society
• /
• v.12 no.4
• /
• pp.28-40
• /
• 2008

Vehicular ad hoc networks (VANETs) are a practical application class of wireless ad hoc networks, which consist of moving vehicles equipped with radio communication capabilities that collaborate to form a temporary network. This paper addresses issues and protocols of multihop routing in such emerging networks in the context of safety and infotainment applications. Due to the highly dynamic mobility of vehicles, frequent link breakage and short connection time are inevitable and, thus, the routing is a challenging task and interest for many researchers and industrial community. The frequent and dynamic change of topology makes the topology-based routing unreliable but the position-based routing more effective. The position-based routing consists of the location service which maps a node id to a geo-graphical position and the forwarding scheme which selects the next hop based on geo-graphical information of the node, its neighbors and the destination. The routing techniques are further categorized into geographical forwarding, trajectory forwarding and opportunistic forwarding based on the forwarding scheme. In this paper, we first present the distinguished properties of VANETs and the challenges and intractable issues posed in designing the routing protocols, followed by the comprehensive survey of existing routing protocols. Then, the different routing protocols designed for VANETs are compared in terms of characteristics, performance and application domains.

• Journal of Satellite, Information and Communications
• /
• v.10 no.1
• /
• pp.29-32
• /
• 2015

It has been a big trend of the convergence technologies about communication systems and vehicular industry to improve safety and convenience. To achieve a number of infotainment vehicular applications, vehicles should transmit information with high reliability. A robust and accurate channel estimation scheme is of great importance to achieve the goal. In this paper, we present a novel enhanced decision-directed channel estimation scheme called FADP (Frequency Averaging Data Pilot) for dynamic time-varying vehicular channels in IEEE 802.11p. We use linear averaging filtering in frequency domain, and utilize the correlation characteristic of the channels between the adjacent two data symbols, update the CR in time domain to get more accuracy. Finally, analysis and simulation results reveal that compared with exist schemes, the proposed scheme has a good performance in mean square error (MSE) and bit error rate (BER).

• IEMEK Journal of Embedded Systems and Applications
• /
• v.5 no.4
• /
• pp.243-253
• /
• 2010

Multihop data delivery in vehicular ad hoc networks (VANETs) suffers from the fact that vehicles are highly mobile and inter-vehicle links are frequently disconnected. In such networks, for efficient multihop routing of road safety information (e.g. road accident and emergency message) to the area of interest, reliable communication and fast delivery with minimum delay are mandatory. In this paper, we propose a multihop vehicle-to-infrastructure routing protocol named Vertex-Based Predictive Greedy Routing (VPGR), which predicts a sequence of valid vertices (or junctions) from a source vehicle to fixed infrastructure (or a roadside unit) in the area of interest and, then, forwards data to the fixed infrastructure through the sequence of vertices in urban environments. The well known predictive directional greedy routing mechanism is used for data forwarding phase in VPGR. The proposed VPGR leverages the geographic position, velocity, direction and acceleration of vehicles for both the calculation of a sequence of valid vertices and the predictive directional greedy routing. Simulation results show significant performance improvement compared to conventional routing protocols in terms of packet delivery ratio, end-to-end delay and routing overhead.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.3
• /
• pp.1533-1556
• /
• 2017

The concept of trust in vehicular ad hoc networks (VANETs) is usually utilized to assess the trustworthiness of the received data as well as that of the sending entities. The quality of safety applications in VANETs largely depends on the trustworthiness of exchanged data. In this paper, we propose a self-organized distributed trust computing framework (DTCF) for VANETs to compute the trustworthiness of each vehicle, in order to filter out malicious nodes and recognize fully trusted nodes. The proposed framework is solely based on the investigation of the direct experience among vehicles without using any recommendation system. A tier-based dissemination technique for data messages is used to filter out non authentic messages and corresponding events before even going farther away from the source of the event. Extensive simulations are conducted using Omnet++/Sumo in order to investigate the efficiency of our framework and the consistency of the computed trust metrics in both urban and highway environments. Despite the high dynamics in such networks, our proposed DTCF is capable of detecting more than 85% of fully trusted vehicles, and filtering out virtually all malicious entities. The resulting average delay to detect malicious vehicles and fraudulent data is showed to be less than 1 second, and the computed trust metrics are shown to be highly consistent throughout the network.

• Journal of Korea Multimedia Society
• /
• v.19 no.7
• /
• pp.1159-1165
• /
• 2016

Traffic violations such as moving while the traffic lights are red have come from a simple omission to a premeditated act. The traffic control center cannot timely monitor all the cameras installed on the roads to trace and pursue those traffic violators. Modern vehicles are equipped and controlled by several sensors in order to support monitoring and reporting those kind of behaviors which some time end up in severe causalities. However, such applications within the vehicle environment need to provide security guaranties. In this paper, we address the limitation of previous work and present a secure and privacy preserving protocol for traffic violation reporting system in vehicular cloud environment which enables the vehicles to report the traffic violators, thus the roadside clouds collect those information which can be used as evidence to pursue the traffic violators. Particularly, we provide the unlinkability security property within the proposed protocol which also offers lightweight computational overhead compared to previous protocol. We consider the concept of conditional privacy preserving authentication without pairing operations to provide security and privacy for the reporting vehicles.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.1-9
• /
• 2007

Compressed natural gas (CNG) has been used as a vehicular fuel compressed at 24.8 MPa because the energy density of natural gas is extremely low compared with gasoline. Thus it has problems in both safety and cost for multiple stage compression. For these reasons the use of adsorbed natural gas (ANG) has been pursued since the storage of natural gas is possible at a relatively low pressure. The present target is to obtain media to store natural gas at 3.5 MPa as ANG that ensures the comparable energy density of CNG, giving approximately one-fourth the driving range of an equivalent volume gasoline tank. In this review, the recent development of carbon media, their characteristics, and practical applications for natural gas storage are introduced and some recommendations are also suggested.

• Journal of Information Processing Systems
• /
• v.13 no.1
• /
• pp.184-195
• /
• 2017

In recent decades, the ad hoc network for vehicles has been a core network technology to provide comfort and security to drivers in vehicle environments. However, emerging applications and services require major changes in underlying network models and computing that require new road network planning. Meanwhile, blockchain widely known as one of the disruptive technologies has emerged in recent years, is experiencing rapid development and has the potential to revolutionize intelligent transport systems. Blockchain can be used to build an intelligent, secure, distributed and autonomous transport system. It allows better utilization of the infrastructure and resources of intelligent transport systems, particularly effective for crowdsourcing technology. In this paper, we proposes a vehicle network architecture based on blockchain in the smart city (Block-VN). Block-VN is a reliable and secure architecture that operates in a distributed way to build the new distributed transport management system. We are considering a new network system of vehicles, Block-VN, above them. In addition, we examine how the network of vehicles evolves with paradigms focused on networking and vehicular information. Finally, we discuss service scenarios and design principles for Block-VN.