• International Journal of Aeronautical and Space Sciences
• /
• 제7권1호
• /
• pp.118-128
• /
• 2006

This paper deals with auto-landing guidance system design applicable to Smart UAV(Unmanned Aerial Vehicle). The proposed guidance law generates horizontal position, velocity and altitude commands in the longitudinal channel and heading angle command in the lateral channel to track a predetermined trajectory for automatic landing. The longitudinal guidance commands are derived from an approximated dynamic equations in vertical plane. These longitudinal guidance commands are appropriately distributed to each control input as the flight mode of Smart UAV is changed. The concept of VOR(VHF Omni-directional Range) guidance system is applied to generate the required heading angle commands to eliminate the lateral deviation from the desired trajectory. The performance of the proposed guidance system for Smart UAV is evaluated using the nonlinear simulation. Simulation results show that the proposed guidance system for auto- landing provides good tracking performance along the predetermined landing trajectory.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1076-1081
• /
• 2004

In this study, we have developed the simulation tool in order to investigate driving trajectory of AGV for container transport. AGV for container transport is different from the indoor AGV in that it is a large size structure at being loaded the weight of 40 ton. And AGV for container transport is applied to front wheel steering, rear wheel steering, all wheel steering, and crap steering. Therefore, we have developed the simulation tool considering dynamic problems and center of turning in accordance with four way of steering modes. Throughout some computer simulations, we have confirmed that this tool is useful to analysis dynamic problems and to calculate minimum radius of turning for large size vehicles.

• 한국산학기술학회논문지
• /
• 제12권11호
• /
• pp.5128-5134
• /
• 2011

본 논문에서는 HEV용 영구자석 매립형 동기전동기의 단위전류 당 최대토크 운전을 위한 dq 전류 궤적에 대하여 고찰하였다. 전동기 상수로부터의 단위전류 당 최대토크 운전을 위한 dq 전류를 해석하고, 이를 바탕으로 영구자석의 자속 및 dq 인덕턴스 등의 전동기 상수가 변할 경우 단위전류 당 최대토크 운전점의 변화를 고찰하였다. 또한 단위전류 당 최대토크 제어를 위한 dq 전류의 궤적을 실험을 통하여 검증하였다.

• 한국ITS학회 논문지
• /
• 제8권6호
• /
• pp.23-35
• /
• 2009

유비쿼터스 환경을 기반으로 하여 돌발상황 발생 시 신뢰성 있는 통행시간 예측을 위해 새로운 개념의 노드-링크 설정 기법을 활용한 대표통행시간 산출기법을 연구하였다. 본 연구에서 제시한 방법론은 교통류의 특성에 따라 링크를 구분하여 개별적인 통행시간을 산출하는 기법이며, 개별차량의 특성을 반영하기 위해 일정 속도단위로 차량분류군을 구분하여 통행시간을 산출하는 방법을 제시하였다. 사고영향권과 사고영향권 상류부, 사고영향권 하류부를 독립적인 링크로 설정 하였으며, 돌발상황 발생 시 나타나는 차로별 통행시간의 특성을 반영하기 위해 통행시간 제공 방법을 차로별로 독립적인 통행시간 제공으로 설정하고, 차로별 통행시간을 산출하였다. 제안된 방법론의 정확도를 MAPE (Mean Absolute Percentage Error)를 이용하여 평가하였고, 프로브차량비율(Percentage of Probe Vehicles: PPV)에 따른 정확도의 변화를 분석하였다. 분석 결과 PPV가 20%이상 확보될 경우 오차율 10% 미만의 정확도를 가지는 것으로 분석되었다. 본 연구는 도래하는 유비쿼터스 교통환경에서 보다 신뢰성 있고, 실시간성 있는 교통정보 생성에 도움이 될 것으로 판단된다.

• 한국산학기술학회논문지
• /
• 제22권2호
• /
• pp.507-513
• /
• 2021

본 연구는 노면 흔적이 발생하지 않은 충돌 사고 사례를 중심으로 양 차량의 최종 정지 위치 및 자세, 차량 파손 부위, 노면 흔적, 차량의 제원, 충돌 각도. 충돌 속도, 제동 여부, 조향 여부 등의 자료를 토대로 교통 사고 분석을 위해 사용하는 차량 충돌 해석 시뮬레이션 프로그램인 PC-CRASH을 이용하여 시뮬레이션을 수행하였다. 차대 차 사고에서 충격 자세, 제동 여부, 최종 정지 위치, 충격 지점 및 충돌 속도는 사고 재구성을 위한 중요한 요소이다. 특히, 충돌 속도는 가장 중요한 쟁점이다. SM5와 렉서스의 충돌 속도는 각각 131km/h, 74km/h, SM5와 렉서스의 충돌각은 각각 0.91°, -161.07°으로 분석되었다. 사고 원인은 교차로를 통과하는 SM5가 최고 제한 속도를 61km/h 초과하여 렉서스의 좌회전 차로로 진입하였고, 렉서스는 충돌을 회피하기 위한 과정에서 충돌하였다. 시뮬레이션의 충돌 궤적 오차율은 약 1.4%이다. 사고 조사자의 주관적인 경험에서 벗어나 충돌 역학 및 차량 공학 측면과 시뮬레이션을 적극 활용하여 사실에 근접한 원인 규명을 제시하였다.

• 한국정밀공학회지
• /
• 제16권6호
• /
• pp.90-99
• /
• 1999

A vehicle driving simulator is a virtual reality device which a human being feels as if the one drives a vehicle actually. The driving simulator is used effectively for studying interaction of a driver-vehicle and developing vehicle system of a new concept. The driving simulator consists of a vehicle motion bed system, motion controller, visual and audio system, vehicle dynamic analysis system, cockpit system, and etc. In it is paper, the main procedures to develop the driving simulator are classified by five parts. First, a motion bed system and a motion controller, which can track a reference trajectory, are developed. Secondly, a performance evaluation of the motion bed system for the driving simulator is carried out using LVDTs and accelerometers. Thirdly, a washout algorithm to realize a motion of an actual vehicle in the driving simulator is developed. The algorithm changes the motion space of a vehicle into the workspace of the driving simulator. Fourthly, a visual and audio system for feeling higher realization is developed. Finally, an integration system to communicate and monitor between sub systems is developed.

• 드라이브 ㆍ 컨트롤
• /
• 제17권1호
• /
• pp.13-20
• /
• 2020

Adaptive neural networks based lateral controller is presented to guarantee path following performance for vehicle lane keeping in the presence of parameter time-varying characteristics of the vehicle lateral dynamics due to the road surface condition, load distribution, tire pressure and so on. The proposed adaptive controller could compensate vehicle lateral dynamics deviated from nominal dynamics resulting from parameter variations by incorporating it with neural networks that have the ability to approximate any given nonlinear function by adjusting weighting matrices. The controller is derived by using Lyapunov-based approach, which provides adaptive update rules for weighting matrices of neural networks. To show the superiority of the presented adaptive neural networks controller, the simulation results are given while comparing with backstepping controller chosen as the baseline controller. According to the simulation results, it is shown that the proposed controller can effectively keep the vehicle tracking the pre-given trajectory in high velocity and curvature with much accuracy under parameter variations.

• 제어로봇시스템학회논문지
• /
• 제18권12호
• /
• pp.1132-1138
• /
• 2012

The MPC (Model Predictive Control) is one of the techniques that can be used to control an unmanned vehicle. It predicts the future vehicle trajectory using the dynamic characteristic of the vehicle and generate the control value to track the reference path. If some obstacles are detected on the reference paths, the MPC can generate control value to avoid the obstacles imposing the inequality constraints on the MPC cost function. In this paper, we propose an obstacle modeling algorithm for MPC with inequality constraints for obstacle avoidance and a method to set selective constraint on the MPC for stable obstacle avoidance. Simulations with the field test data show successful obstacle avoidance and way point tracking performance.

• 자동차안전학회지
• /
• 제6권2호
• /
• pp.61-66
• /
• 2014

This paper described on the motion of hybrid tractor trajectory for powertrain system. The dynamics behavior used to the tractor according to the characteristics of the road surface using $Daful^@$ analysis. The tractor industry is facing to a big problem about rising gas price and exhaust gas environment. Because it was possible overcoming the past drawback, hybrid vehicle had been decided as the best technical way since it has started operating the internal combustion engine with the electric power as the motive power. The vehicle structures have designed the model of a major power transmission factor. The simulation realized in this paper that motion of tractor being turned by torque and force of each joints. Driving characteristics, especially in recent years, IVHS (Intelligent Vehicle Tractor / System) technology, while receiving a lot of attention because of the tractor and the need to pursue high function is emerging as a more and more.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 춘계학술대회 학술발표 논문집
• /
• pp.107-111
• /
• 1998

This paper presents a now approach to the design of intelligent contorl system for track vehicle system using fuzzy logic based on neural network. The proposed control scheme uses a Gaussian function as a unit function in the neural network-fuzzy, and back propagation algorithm to train the fuzzy-neural network controller in the framework of the specialized learning architecture. Moreover, We develop a Windows 95 version dynamic simulator which can simulate a track vehicle model in 3D graphics space. It is proposed a learning controller consisting of two neural network-fuzzy based of independent reasoning and a connection net with fixed weights to simply the neural networks-fuzzy. The dynamic simulator for track vehicle is developed by Microsoft Visual C++. Graphic libraries, OpenGL, by Silicon Graphics, Inc. were utilized for 3D Graphics. The performance of the proposed controller is illustrated by simulation for trajectory tracking of track vehicle speed.