• Journal of Auto-vehicle Safety Association
• /
• v.3 no.2
• /
• pp.17-21
• /
• 2011

Vehicle safety device such as active headrest and rear detection system has been developing as people are interested about rear end collision more than head on or than front. However, there is no any standard or criterion in order to evaluate vehicle safety device for rear end collision. Also there is no test protocol about rear end collision in vehicle experiment. Therefore, this research developed scenario for experiment about rear end collision in vehicle experiment. Also this research evaluated dangerousness about vehicle test and fitness about re-enacting rear end collision using scenario developed using commercial software (PC-Crash) which can re-enact vehicle collision in virtual vehicle experiment. Scenario developed according to statistics from National Highway Traffic Safety Administration and German In-Depth Accident Study. Scenario has twelve cases which composed of Re-LVS (Rear end Leading Vehicle Stop), Re-LVM (Rear end Lead Vehicle Moving) and scenario for evaluation about malfunction of active headrest.

• Journal of Auto-vehicle Safety Association
• /
• v.11 no.2
• /
• pp.44-52
• /
• 2019

In this study a safety evaluation method is presented for a ADAS vehicle to be tested in collision situation when multiple vehicles are present on a single lane. Test scenarios are developed based on Euro-NCAP assessment scenarios, accident database and related simulation results in previous works. An automated evaluation system that is called as the K-target mover is used for active safety evaluation experiments. The experiments are conducted with two types of tests. First, the rear-end collision tests with 25% and 50% overlap for the test vehicle and target vehicle are conducted with the two kinds of test vehicles. On the other hand, the rear-end collision tests which include multiple vehicles in a single lane with 25% and 50% overlaps, are also conducted. Experimental results show that the test vehicles with ADAS cannot recognize the collision situation sometimes in the developed test scenarios, even in the case that the test vehicle showed stable performance in the simple overlap scenarios.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.4
• /
• pp.266-275
• /
• 2008

The performance improvement of each part for durability, safety and cost of high pressure storage system for fuel cell vehicle has been focused so far. However, for the mass production of fuel cell vehicle, it is necessary to evaluate durability and safety in system module and vehicle level. The test procedure to evaluate vibration and collision safety of high pressure hydrogen storage system for the fuel cell vehicle is established and its reliability is verified.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.4
• /
• pp.88-94
• /
• 2023

The seating postures of passengers in the automated driving vehicle are possible in atypical forms such as rear-facing and lying down. It is necessary to improve devices such as airbags and seat belts to protect occupants from injury in accidents of the automated driving vehicle, and collision safety evaluation tests must be newly developed. The purpose of this study is to define representative types of head-on collision accidents to develop collision standards for autonomous vehicles that take into account changes in driving behavior and occupants' postures. 150 frontal collision cases remained by filtering (accident videos, images, AIS 2+, passenger car, etc…) and random sampling from approximately 320,000 accidents claimed by a major insurance company over the past 5 years. The most frequent accident type is a head-on collision between a vehicle going straight and a vehicle turning left from the opposite side, accounting for 54.7% of all accidents, and most of these accidents occur in permissive left turns. The next most common frontal collision is the center-lane violation by drowsy driving and careless driving, accounting for 21.3% of the total. For the two types above, data such as vehicle speed, contact point/area, and PDOF at the moment of impact are obtained through accident reconstruction using PC-Crash. As a result, two types of autonomous vehicle crash safety test scenarios are proposed: (1) a frontal oblique collision test based on the accident types between a straight vehicle and a left-turning vehicle, and (2) a small overlap collision test based on the head-on accidents of center-lane violation.

• Journal of Auto-vehicle Safety Association
• /
• v.5 no.2
• /
• pp.45-50
• /
• 2013

The whiplash Injuries due to rear collision occur frequently. As result, in many countries, seat performance is being assessed and developed to improve head whiplash injury in rear collision of passenger car. This study compares whiplash assessment methods in each country. Using the DFSS(Design for Six Sigma) method, the correlation between influence parameters of head restraints and whiplash injury criteria is analyzed. Four control factors are used in this study. And total 11 whiplash injury criteria from NCAP(New Car Assessment Program) of Korea, Europe, China and IIHS(Insurance Institute for Highway Safety) of USA are used for output response. By the experimental design, L9 orthogonal coordinate system is configured and is tested by sled test equipment, twice. By using average assay value and ANOVA, the correlation between control factors and injury criteria has been comprehended. Optimization design of head restraint according the regional seat safety assessment was derived through the correlation.

• Journal of Auto-vehicle Safety Association
• /
• v.7 no.1
• /
• pp.33-39
• /
• 2015

This study examined the drivers' acceptance level of various active safety features with Korean drivers on Seoul urban and city roads. The test vehicle, 2013 Cadillac ATS, was equipped with FCA(Forward Collision Alert), LDW(Lane Departure Warning), SBZA(Side Blind Zone Alert), FRPA(Front/Rear Park Assist), RCTA(Rear Cross Traffic Alert), ACC(Adaptive Cruise Control), and AEB(Autonomous Emergency Braking). Participants had chances to run the tests on those systems in the parking lot accompanied by the 106km long stretch of predetermined route including local road and interurban highway in Seoul and Gyeonggi-do under normal traffic flowing environment. After the test, participants completed a series of questionnaires about the features they experienced. The results revealed that RCTA and SBZA systems received more favourable ratings compared to the other features in avoiding crashes. The respondents preferred sound alerts to haptic ones even though haptic warning methods were better in providing directional information.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.4
• /
• pp.432-438
• /
• 2016

Whiplash injuries in low-speed rear-end collisions are the most common injuries and has been a social issue in insurance industry, such as excessive medical claim costs along with exaggerated injuries of victims and treatments from hospitals. According to the Korea Insurance Development Institute reports, the number of claims by rear-end collision was approximately 703,000, which accounts for 53.6 % of the total car-to-car collisions in 2014. Part of the neck injury claims in the Korea car insurance was approximately 28.3 %. Furthermore, approximately 98.4% of the injured persons in rear-end collisions sustained minor injuries under AIS2. In order to improve this situation as well as find out the severity of neck injuries from rear-end collision, the Korea Automobile Insurance Repair Research and Training Center conducted car-to-car rear-end crash tests that striking vehicles(SUV) collided into different sizes of struck-vehicles(small, middle, and large sedan) at the impact speeds of 8 km/h ~ 16 km/h. In order to analyze the whiplash injury, the BioRID-II was seated in each struck-vehicles, and the neck injury criteria(NIC), head contact time, maximum vehicle accelerations, and mean vehicle accelerations were calculated from values from the accelerations of the dummy and the struck-vehicles.

• Composites Research
• /
• v.36 no.4
• /
• pp.253-258
• /
• 2023

Although the development of transportation means has realized the right to mobility for the disabled who have difficulty in moving, it can be said that the improvement of the safety of passengers with disabilities that can occur in a car accident is lower than that of ordinary passenger seats. In particular, in the case of a rear-end collision that can occur suddenly, it is a reality that disabled passengers are vulnerable to head and neck injuries. Therefore, in this study, a multi-layer headrest foam that divides the headrest into three parts in the coronal plane was proposed to improve the head and neck injury index of disabled passengers in the vehicle in the event of a rear-end collision of a wheelchair transport vehicle. A range of stress scale factors was selected to give various compressive characteristics of the foam through low-speed rear-end collision analysis through a simple model, and GA optimization was performed by specifying the range as a parameter. Through the optimization result, the phase relationship between HIC and NIC was analyzed according to the compression characteristics of the layers. HIC responded most sensitively to the compression characteristics of the front layer and NIC responded to the compression characteristics of the mid layer, and the compression characteristics of the rear layer showed the lowest. A normal headrest and an optimized multi-layer headrest were placed in the validation model to analyze the low-speed rear-end collision sled test, and HIC and NIC were derived lower in the multi-layer headrest than in the general headrest. The compression behavior of the multi-layer headrest was also clearly shown, and it was verified that the multi-layer headrest was effective in improving the injury index of the head and neck compared to the general headrest.

• Journal of Auto-vehicle Safety Association
• /
• v.4 no.2
• /
• pp.5-10
• /
• 2012

Whiplash is the most frequent injury among occupants in low speed rear-end car collision. The aim of this paper is to analyze thecorrelation between influence parameters of head restraints and whiplash injury criteria.In this paper, DFSS (Design for Six Sigma) method is used for optimum design of head restrains. Four control factors of head restraints have selected by function matrix method. The effects of the control factors have been experimentally evaluated by using a sled pulse from 16km/h relative velocity which is suggested by KNCAP (Korean New Car Assessment Program). In order to reduce the noise factors of dynamic tests, whiplash tests were repeated twice. By using DFSS, the correlation between control factors and injury criteria has been comprehended.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.2
• /
• pp.6-10
• /
• 2016

The objective of this paper is to understand value of active safety features on the customer perspective. In this study, 30 participants who don't have experience with active safety features were recruited and asked for preference, usefulness and consideration of each active safety feature after driving evaluation by them. Through this research, the preference of active safety features were analyzed and which of active safety features were the most useful and the most considered by customer when they purchase new vehicle. As a result, adaptive cruise control and side blind zone alert were the most strongly preferred and considered features by respondents and it means that respondents wanted comfort environment while driving and seemed to value features that compensated for limited visibility. On the other hand, active safety features that warned driver without control of the vehicle was deemed generally less desirable such as lane departure warning and forward collision alert. But autonomous emergency braking was higher than the other active safety features with only warning even if they did not have experience for it while this test. They thought it will be helpful in case of front-end collision situation even they just listened description before the test.