• 대한교통학회지
• /
• 제25권6호
• /
• pp.7-18
• /
• 2007

교통정책측면에서 국내의 자동차 배출가스로 인한 대기오염 문제는 그 중요성에 비해 구체화된 연구가 부족한 것이 현실이다. 이에 본 연구는 국내외 교통환경 관련연구를 차량배출량 산정, 차량배출량감소 정책, 차량배출량감소 교통운영 관련연구로 구분하고 연구동향 및 시사점을 도출하였다. 그 결과, 국내의 차량배출량 산정관련 연구는 차량의 주행특성을 반영하지 못하는 거시적인 산정방법위주의 연구에 그치고 있어, 미시적인 배출량산정 모형을 개발해야 할 필요성을 제기하였다. 차량배출량감소 정책관련 연구는 계량화된 기초자료를 축적하여 권역별 대기오염 수준에 맞는 차별화된 정책을 수립해야 함을 강조하였으며, 차량배출량감소 교통운영관련 연구는 환경영향의 정량적 평가와 ITS 및 신호시스템의 영향을 고려할 수 있는 시뮬레이션 기법 개발을 통해 차량배출량을 최소화 시키는 교통신호운영전략의 수립이 이루어져야함을 제안하였다. 최근 교통분야에서 환경의 고려가 중요시 되는바, 본 연구결과가 연구자들에게 최근 연구사항을 신속히 파악하여 연구효율을 극대화 하는데 기여하길 기대한다.

• 한국분무공학회지
• /
• 제21권4호
• /
• pp.223-236
• /
• 2016

On-road source emissions are major air pollutants and have been associated with serious health effects in Seoul metropolis. Thus, it is of fundamental importance to have an accurate assessment of vehicle emissions in order to implement an effective air quality management policy. As a result, there is a need to overview vehicle emission characteristics of air pollutants. This article discusses vehicle exhaust sampling and chemical analysis, emission characteristics of air pollutants, and emission regulations from passenger cars. The vehicle exhaust sampling and chemical analysis methods were described in particulate matter and gaseous compounds. In this article, chassis dynamometer, measurement instrumentation for nano-particulate matter and carbon compounds analysis device were described. For the gasoline and diesel vehicles, the effective parameters of emissions were average vehicle speed, vehicle mileage and model year. The particle number emissions for diesel nano-particles were sensitive to the sampling conditions. Also, the particle number emissions with a diesel particle filter (DPF) largely reduced rather than those without it. This article also describes different emission characteristics of air pollutants according to biodiesel or bioethanol mixing ratio. The Korean emission standards for passenger cars were compared with those of the US and EU. Finally, the objective is to give an overview of relevant background information on emission characteristics of air pollutants from passenger cars in Korea.

• 한국도로학회논문집
• /
• 제14권5호
• /
• pp.113-122
• /
• 2012

PURPOSES: The sensitivity of $CO_2$ emissions per vehicle by a various speeds is compared according to the type of roads. METHODS: The methodology of the study are as follows: First, the sensitivity of $CO_2$ emissions per vehicle are analyzed by averaged daily travel speeds. Second, the sensitivity of $CO_2$ emissions per vehicle are analyzed by averaged hourly travel speed. Third, the sensitivity of $CO_2$ emissions per vehicle are analyzed by sectional travel speeds. RESULTS: The sensitivity that on Saturday in a week, at peak times in a day and in close location from Seoul was higher than in other situations. CONCLUSIONS: From this study, we may conclude that $CO_2$ emissions per vehicle at low speeds are generally more sensitive.

• 환경정책연구
• /
• 제14권3호
• /
• pp.3-19
• /
• 2015

지자체 단위의 도로이동오염원 배출량을 보다 현실적으로 산정하기 위하여 배출량 산정 시 기초자료인 차량 등록대수를 보정하는 방안을 검토하였다. 국가교통DB를 이용하여 수도권 지역의 특정 차종(RV, 승합차, 버스, 화물차)에 대한 차량 등록대수를 보정한 결과, 지역별로는 서울의 오차율이 가장 크고 차종별로는 버스와 화물차의 오차율이 큰 것으로 나타났다. 또한, 배출량 산정에 영향을 미치는 기존 등록대수와 보정 등록대수 편차의 절대값은 수도권 지자체 모두 화물차가 가장 큰 것으로 나타났다. 배출량 산정 결과, 기존 등록대수 기반의 배출량과 보정 등록대수 기반의 배출량의 차이는 약 9%로 나타났으며, 수도권 지자체 중에서는 인천의 배출량 오차율이 가장 큰 것으로 나타났다.

• 융복합기술연구소 논문집
• /
• 제8권1호
• /
• pp.5-8
• /
• 2018

Emissions of diesel vehicles have been regulated by NEDC mode for a long time. However, the NEDC mode has been known the control of emission reduction is not reflected properly on actual road conditions. For these reasons, diesel vehicle emissions are regulated in both NEDC mode and WLTC mode from 2017 to 2020, from 2020 onwards, the emissions of diesel vehicles will measure in WLTC mode only and will not be able to exceed 1.5 times the regulated value. The purpose of this study is to analyze the development trend of diesel vehicle after-treatment system in order to comply with the future regulations on diesel vehicle. As a result, it is essential to reduce the NOx emissions of diesel vehicles for Euro 6, the NOx emissions of the test vehicle equipped with SCR were 30% to 50% loss than the test vehicle equipped with LNT despite the higher curb weight and engine displacement.

• 오토저널
• /
• 제13권5호
• /
• pp.89-94
• /
• 1991

In the quantitative analysis of oxygenated exhaust emissions (unburned methanol, formal- dehyde) from methanol fueled vehicles, the oxygen contained in oxygenated exhaust gases lowers the FID (Flame Ionization Detector) response factor of conventional THC analyzer and leads to erroneous HC reading. For correct measurement of various HCs including oxygenated HCs emitted from FFV(Flexible Fuel Vehicle), first of all, the measurement technique of real HC emissions should be established. GC and HPLC-DNPH measuring methods specified by the EPA are used in this paper to analyze unburned methanol and formaldehyde components in the exhaust emissions. In emission test of FFV, unburned methanol and formaldehyde are emitted mostly during cold transient period, and it is shown that formaldehyde emission level is proportional to engine displacements. In view of the HC emission level, vehicle using M85 has 40% advantage over gasoline-fueled vehicle in OMHCE and has a good potential of a low emission vehicle.

• 한국도로학회논문집
• /
• 제15권5호
• /
• pp.123-133
• /
• 2013

PURPOSES : The present paper is to compare vehicles' $CO_2$ emissions in roundabouts and signalized intersections. METHODS : The present paper uses the SIDRA software with variables of traffic and road conditions. RESULTS : The results of the study are as follows : First, when entering traffic volumes are more than 1600pcph, vehicle's $CO_2$ emissions in roundabouts are lower than those of signalized intersections regardless of the left turn ratio. Second, When entering traffic volumes are more than 2800pcph, vehicles's $CO_2$ emissions in 2-lane approaches are lower than those of 1-lane approaches in signalized intersection. Third, when entering traffic volumes are more than 1600pcph, vehicle's $CO_2$ emissions of CASE B are lowest. (CASE B is the condition with one exclusive left-turn lane and one exclusive straight lane and one shared straight lane with right-turn.) Also, CASE A is the condition that vehicle's $CO_2$ emissions in roundabouts are lower than those of signalized intersections between 1600pcph and 3600pcph. (CASE A is the condition with one exclusive left-turn lane and one shared straight lane with right-turn.) But, when entering traffic volumes are more than 4000pcph, vehicle's $CO_2$ emissions in signalized intersections is lower than those of roundabouts. CONCLUSIONS : It may be concluded that vehicle's $CO_2$ emissions on roundabouts are much lower than those of signalized intersections, especially, when entering traffics volumes are between 1600pcph and 3600pcph in 1-lane or 2-lane approaches.

• 한국도로학회논문집
• /
• 제18권2호
• /
• pp.103-110
• /
• 2016

PURPOSES: In this paper, the effectiveness of speed-maintained standardization in road geometry on environmental impact at a downward slope location, based on greenhouse gas (GHG) emission indicators, was studied. Specifically, the aim of this study was to ascertain whether speed-maintained standardization resulted in decreased $CO_2$ emissions as well as noise pollution, due to reduced vehicle speeds. METHODS : In this study, speed-maintained standardization in road geometry was proposed as a means to reduce vehicle speeds, with a view to reducing $CO_2$ emissions and noise pollution. This technique was applied at a downward slope location. The vehicle speeds, $CO_2$ emissions, and noise levels before and after application of speed-maintained standardization were compared. RESULTS: It was found that speed-maintained standardization was effective as a means to reduce speed, as well as $CO_2$ emissions and noise pollution. By applying speed-maintained standardization, it was confirmed that vehicle speeds were reduced consistently. As a result, $CO_2$ emissions and noise levels were decreased by 9% and 11%, respectively. CONCLUSIONS : This study confirmed that speed-maintained standardization in road geometry is effective in reducing vehicle speeds, $CO_2$ emissions, and noise levels. Moreover, there is further scope for the application of this method in the design of roads in urban and rural areas, as well as in the design of highways.

• 한국자동차공학회논문집
• /
• 제11권2호
• /
• pp.104-110
• /
• 2003

As exhaust emission standards are more stringent, higher conversion efficiency of automotive catalytic converter is required. In addition, catalytic converter is deteriorated during mileage accumulation of vehicle. Therefore the specification of catalytic converter should be decided in consideration of emission standards and deterioration. Because the decision of the specification of catalytic converter is required at the beginning of vehicle development procedure, it is important and necessary to fix the target values of green vehicle exhaust emissions. To do this, a linear regression analysis was done with in-use exhaust emissions data of 5 different kinds of vehicle that received US94 emission standards certification, and data handling methods including some statistical estimation were proposed. As a result, the fixed target values of NMHC, CO, NOx of green vehicle against US94 emission standards were 0.079, 0.83, 0.116, respectively. And expected in-use deterioration factor of NMHC, CO, NOx were 1.75, 2.02, 1.38, respectively. And also it was blown that even if failure rate is 30% after 80,000km driven, it might be sufficiently safe from emission failure confirmatory test of Korea. It is hopeful to make a database of in-use emissions to increase the confidence in correctness of the calculated target values.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2000년도 추계학술대회 논문집
• /
• pp.136-138
• /
• 2000

The vehicle emissions of primary air pollutants are described by the emission factor (EF), defined as the emitted mass (g) of a compound per distance (km) and vehicle. The EF can be determined by exhaust measurements from single vehicles in dynamometric tests. However, the EF of a large number of vehicles has to be measured to obtain the representative results for actual road traffic emissions. Road traffic emissions can also be determined by exhaust measurements of driving vehicles or in tunnel measurements. (omitted)