• Computational Structural Engineering
• /
• v.10 no.3
• /
• pp.195-202
• /
• 1997

The charateristics of stabilization for stabilized truss unit-structures with cable and truss are investigated in this paper. This unit system is composed of a central post and eight cables, and is connected by hinge joints, and stabilized by self-equilibrated stress field. As this unit structure itself is a statically closed and stabilized system individually, it can be employed to assemble structures with various configurations. In this study, for stabilization of truss structures stabilized by cable tension, the structural concept of unit structures, the range of various geometrical parameters and the relationship of governing parameters about unit systems are explained.

• Journal of Radiation Protection and Research
• /
• v.29 no.1
• /
• pp.41-48
• /
• 2004

A safety assessment code, called SAGE (Safety Assessment Groundwater Evaluation), has been developed to describe post-closure radionuclide releases and potential radiological doses for low- and intermediate-level radioactive waste (LILW) disposal in an engineered vault facility in Korea. The conceptual model implemented in the code is focused on the release of radionuclide from a gradually degrading engineered barrier system to an underlying unsaturated zone, thence to a saturated groundwater zone. The radionuclide transport equations are solved by spatially discretizing the disposal system into a series of compartments. Mass transfer between compartments is by diffusion/dispersion and advection. In all compartments, radionuclides ate decayed either as a single-member chain or as multi-member chains. The biosphere is represented as a set of steady-state, radionuclide-specific pathway dose conversion factors that are multiplied by the appropriate release rate from the far field for each pathway. The code has the capability to treat input parameters either deterministically or probabilistically. Parameter input is achieved through a user-friendly Graphical User Interface. An application is presented, which is compared against safety assessment results from the other computer codes, to benchmark the reliability of system-level conceptual modeling of the code.

• The Journal of Korean Academy of Prosthodontics
• /
• v.31 no.2
• /
• pp.207-218
• /
• 1993

The purpose of this study was to evaluate the reproducing accuracy of stone casts made from complete arch impressions using different impression materials. The impression materials studied were 1) polyether, 2) polysulfide, 3) polyvinyl siloxane, and 4) irreversible hydrocolloid. Impressions were made from a partially edentulous acrylic resin model with metal inserts in canine, first molar region bilaterally and mid palatal vault region. Each distance between 2 out of 5 meauring points was measured by using 3dimensional measuring machine. Impressions were poured at once with a type IV dental stone. Data were analyzed using t-test with a sample size of six. The results were as follow : 1. Polysulfide and polyether were significantly superior to polyvinyl siloxane and irreversible hydrocolloid in reproducing full arch model(p<0.05), but there were no statistical differences in amount of dimensional reproducing accuracy for full arch impression between polysulfide and polyether(p>0.05). 2. There were statistical differences in amount of dimensional reproducing accuracy between edentulous area and tooth bound area for polysulfide and polyether(p<0.05). but no statistical differences were observed for polyvinyl siloxane and irreversible hydrocolloid(p>0.05).

• Imaging Science in Dentistry
• /
• v.34 no.3
• /
• pp.165-169
• /
• 2004

Craniofacial dysostosis is considered to be one of rarely observed syndromes characterized by premature closing of all cranial sutures. The first patient was a 4-year-old male infant who had been complaining of empyema. Clinical findings showed exophthalmos, hypertelorism and facial asymmetry. Conventional radiographs demonstrated abscence of cranial sutures and underdeveloped maxilla. CT scan demonstrated the digital impressions of the inner surface of the cranial vault, enlarged and depressed sella turcica. The second patient was a 2-year-old female infant who had been complaining of facial deformity. Clinical findings showed hypertelorism and underdeveloped maxilla. Radiographs showed premature synostosis of all cranial sutures, depressed and enlarged sella turcica, and hypoplastic maxilla. 3 years after operation, her look improved. However, resurgery may be considered to decreasing intracranial pressure and for correction of facial deformity. Two interesting cases showing ‘cloverleaf’ skulls were presented.

• Nuclear Engineering and Technology
• /
• v.45 no.5
• /
• pp.589-596
• /
• 2013

In a pressurized heavy water reactor, following loss of the primary coolant, severe core damage would begin with the depletion of the liquid moderator, exposing the top row of internally-voided fuel channels to steam cooling conditions on the inside and outside. The uncovered fuel channels would heat up, deform and disassemble into core debris. Large inventories of water passively reduce the rate of progression of the accident, prolonging the time for complete loss of engineered heat sinks. The efficacy of available backup and ultimate heat sinks, available in a CANDU 6 reactor, in mitigating the consequences of a prolonged station blackout scenario was analysed using the MAAP4-CANDU code. The analysis indicated that the steam generator secondary side water inventory is the most effective heat sink during the accident. Additional heat sinks such as the primary coolant, moderator, calandria vault water and end shield water are also able to remove decay heat; however, a gradually increasing mismatch between heat generation and heat removal occurs over the course of the postulated event. This mismatch is equivalent to an additional water inventory estimated to be 350,000 kg at the time of calandria vessel failure. In the Enhanced CANDU 6 reactor ~2,040,000 kg of water in the reserve water tank is available for prolonged emergencies requiring heat sinks.

• Nuclear Engineering and Technology
• /
• v.32 no.3
• /
• pp.274-282
• /
• 2000

The simulation of water balance was conducted for suggested four alternative multi-layer cover design of near-surface radioactive waste disposal facility under domestic climate condition. The analysis was also conducted for the most favorable one out of four alternative cover design under conservative scenarios. Until 100 years after closure of disposal vault, the infiltration flux for the most favorable cover design was negligible even under doubling of the ambient precipitation condition. When the degradation of asphalt and geomembrane after 100 years of closure was considered, the infiltration flux significantly increased almost to the design criteria of cover system in I' Aube disposal facility. And it was found that the hydraulic conductivity of bentonite/sand as a bottom barrier should be no greater than 1$\times$10$^{-7}$ cm/sec recommended by U.S. EPA.

• Journal of Institute of Control, Robotics and Systems
• /
• v.22 no.1
• /
• pp.53-58
• /
• 2016

Various jumping robot platforms have been developed to carry out missions such as rescues, explorations, or inspections of dangerous environments. We suggested a jumping robot platform using energy conversion of the elastic body like the bar of a pole vault, which is the main part in which elastic force occurs. The compliant link was optimized by an optimization method based on Taguchi methodology, and the robot's leaping ability was improved. Among the parameters, the length, width, and thickness of the link were selected as design variables first while the others were fixed. The level of the design variables was settled, and an orthogonal array about its combination was made. In the experiment, dynamic simulations were conducted using the DAFUL program, and response table and sensitivity analyses were performed. We found optimized values through a level average analysis and sensitivity analysis. As a result, the maximum leaping height of the optimized robot increased by more than 6.2% compared to the initial one, and these data will be used to design a new robot.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.30 no.1
• /
• pp.17-27
• /
• 2020

Many users are using password managers in order to conveniently manage several usernames and passwords needed to access the web sites. The password manager encrypts and stores several passwords on the server, and the user accesses the server to receive the password information. Thus, if an attacker can sniff a message between the password manager and the server and decrypt the message content, or if an attacker can steal the computer's memory and decrypt the message content, then all the passwords will be exposed to the attacker. In this paper, we analyze the client-server communications and encryption process of password mangers and show there is a serious vulnerability in memory attack.

• Journal of Radiation Protection and Research
• /
• v.3 no.1
• /
• pp.29-32
• /
• 1978

A shielding calculation has been carried out for a storage vault of $5292(42{\times}42{\times}3)$ waste drums in which the mixed radioactive gamma-emitters are contained. The required ordinary concrete shielding thickness seems to be approximately 50cm. The results in terms of dose rate for polyenergy gammas appear to be considerably higher than those of the averaged energy gamma.

• International journal of advanced smart convergence
• /
• v.10 no.4
• /
• pp.72-83
• /
• 2021

The use of the predictive analytics (PA) powered by the artificial intelligence (AI) is more important in the movie sector during the COVID-19 pandemic, because Hollywood witnessed the impact of the 'Netflix Effect' and began to invest in data and AI. Our purpose is to discover a few cases of the AI centered PA in the movie industry value chain based on five objectives of PA: Compete, grow, enforce, improve, and satisfy. Even if movie companies' interest is to predict future success for competing with over-the-tops (OTTs) at a first glance, it is observed, once they start to use the PA with the AI, they try to utilize the enhanced PA platforms for remaining four objectives. As a result, ScriptBook, Vault, Pilot, Cinelytic and Merlin Video (Merlin) are use cases for the objective 'compete.' Movio of Vista Group International and Datorama of Salesforce are use cases for the objective 'grow.' Industrial Light & Magic (ILM) and Geena Davis Institute on Gender in Media (GDI) with Disney are use cases for the objective 'enforce.' Watson, Benjamin, and Greenlight Essential are use cases for the objective 'improve.' Disney Research (DR) with Simon Fraser University and California Institute of Technology is the use case for the objective 'satisfy.'