• 한국기계가공학회지
• /
• 제19권12호
• /
• pp.8-13
• /
• 2020

Seamless pipes are fabricated by drilling a hole in a cylindrical material and drawing the material to the desired diameter. These pipes are used in environments where high reliability is required. In this study, the pipe drawing process was simulated using DEFORM, a commercial finite element method (FEM) analysis program. The outer diameter of the steel cylinder used herein before drawing was 70 mm, and the target outer diameter was 58 mm. The drawing process consisted of two stages. In this study, the effect of cross-sectional reduction rate on the pipe was investigated by varying the cross-sectional reduction rate in each step to achieve the target outer diameter. The results of this study showed that the first section reduction rate of 26% and the second section reduction rate of 13.9% caused the lowest damage to the material. Moreover, the FEM simulation results confirmed the influence of the drawing die angle on the pipe drawing process. The drawing die angles of 15° in the first step and 9° in the second step caused the least damage to the material.

• Steel and Composite Structures
• /
• 제51권5호
• /
• pp.563-573
• /
• 2024

This research experimentally evaluated the local stress distribution along the cross-section of composite beams under both positive and negative moments. The experiment utilized a large-scale, two-story, two-by-three bay steel gravity frame with a concrete on metal deck floor system. The composite shear connections, which are nominally assumed to be pinned under gravity loading, can develop non-negligible moment-resisting capacity when subjected to lateral loads. This paper discusses the local stress distribution, orshear lag effects, observed near the beam-to-column connections when subjected to combined gravity and lateral loading. Strain gauges were used for measurements along the beam depth at varying distances from the connection. The experimental data showed amplified shear lag effects near the unconnected region of the beam web and bottom flange under the applied loading conditions. These results indicate that strain does not vary linearly across the beam cross-section adjacent to the connection components. This insight has implications for the use of experimental strain gauge data in estimating beam demands near the connections. These findings can be beneficial in informing instrumentation plans for future experimental studies on composite beams.

• 한국공간구조학회논문집
• /
• 제23권2호
• /
• pp.61-68
• /
• 2023

A two-hour fire-resistance PC hollow slab for residential use was developed to secure structural and fire-resistance performance and to be applied to the general building and apartment housing markets. Compared to the existing hollow slab, in order to secure the same or better structural performance and economic feasibility by reducing the quantity, it was attempted to secure the fire resistance performance by reducing the concrete filling rate in the cross section and adjusting the thickness of the upper and lower flanges by optimizing the hollow shape in the cross section of the slab. For structural performance evaluation, experiments were performed on PC hollow slabs by varying the member thickness and the presence or absence of overlaid concrete, and all of the experimental results showed that the design strength was sufficiently exhibited and that stability during construction was possible. The developed synthetic PC hollow slab has secured fire resistance and residential performance so that it can be applied to all buildings, and it is intended to be immediately applied to the field.

• Journal of Ship and Ocean Technology
• /
• 제8권2호
• /
• pp.29-40
• /
• 2004

Interaction of grounded ice ridges with underlying seabed is one of the major considerations in the design of Arctic pipeline system. Previously several ice scour models were developed by researchers to describe the ice scour-seabed interaction mechanism. In this paper, a parametric study on ice scouring mechanism is performed and the limitation of ice scour-seabed interaction models is discussed. Simple laboratory tests are carried out and then the shape pattern of deposited soil around the ice is redefined. New ice scour model assumes trapezoidal cross section based on the field observation data. Ice scour depth and soil resistance forces on seabed are calculated with varying the keel angle of a model ice ridge.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권10호
• /
• pp.1269-1274
• /
• 2014

Due to the presence of Dean flow in curved ducts, helical channels have drawn attention recently because of the practical industrial applications. The manipulation of fluids through microfluidic devices is widely used in many scientific and industrial areas. In the present study, numerical simulations were performed on a helical microchannel to predict the impact of different design parameters that affect Dean flow. Important geometric parameters such as the channel cross section, pitch, radius of curvature, and number of turns were considered for the analysis. The study also incorporates the effect of varying flow rate on Dean flows. It was found from the simulation results that microchannel cross section and pitch have a significant impact on maintaining the Dean flow, compared to the radius of curvature, number of turns, and flow rate.

• 한국항공우주학회지
• /
• 제46권4호
• /
• pp.277-282
• /
• 2018

본 연구에서는 유한요소법 기반의 단면 특성치 해석 프로그램인 Ksec2d-AE의 정확성을 검증함으로써, 학부 수준의 비행체 구조해석 및 설계 시 활용가능성을 제시하고자 한다. 이를 위해 다양한 요소를 적용하여 Ksec2d-AE 로부터 계산된 단면강성계수 결과에 대한 유한요소의 수렴성을 확인하였다. 또한 Ksec2d-AE로부터 구한 단면강성계수를 상용 구조해석 프로그램인 MSC NASTRAN 으로부터 구한 강성계수와 비교하고, 주요 공학적 중심치(인장 중심, 전단 중심, 주 굽힘축)의 특성에 부합하게 구조물이 거동하는지 확인함으로써 Ksec2d-AE의 단면강성계수 및 중심치 결과를 검증하였다. 본 연구를 통하여 Ksec2d-AE 프로그램의 유용성을 확인하였다.

• Steel and Composite Structures
• /
• 제16권4호
• /
• pp.437-454
• /
• 2014

The influence of spacers on the behaviour and ultimate capacity of intermediate length CFS open section columns under axial compression is investigated in this paper. The focus of the research lies in the cross- section predominantly, failed by distortional buckling. This paper made an attempt to either delay or eliminate the distortional buckling mode by the introduction of transverse elements referred herein as spacers. The cross-sections investigated have been selected by performing the elastic buckling analysis using CUFSM software. The test program considered three different columns having slenderness ratios of 35, 50 & 60. The test program consisted of 14 pure axial compression tests under hinged-hinged end condition. Models have been analysed using finite element simulations and the obtained results are compared with the experimental tests. The finite element package ABAQUS has been used to carry out non-linear analyses of the columns. The finite element model incorporates material, geometric non-linearities and initial geometric imperfection of the specimens. The work involves a wide parametric study in the column with spacers of varying depth and number of spacers. The results obtained from the study shows that the depth and number of spacers have significant influence on the behaviour and strength of the columns. Based on the nonlinear regression analysis the design equation is proposed for the selected section.

• 대한기계학회논문집B
• /
• 제27권5호
• /
• pp.644-654
• /
• 2003

An analytical solution for a vertically stratified viscous flow in a microchannel with a rectangular cross-section is constructed, assuming fully developed laminar flow where the interfaces between the fluid layers are flat. Although the solution is for n-layer flow, restricted results to symmetrical three-layer flow are presented to investigate the effects of the viscosity and thickness ratios of the fluid layers and the aspect ratio of the microchannel on the flow field. Relations between the flow rate and thickness ratios of the fluid layers with varying viscosity distributions are found, considering the cross -sectional velocity profiles which vary noticeably with the three parameters and differ significantly from the velocity profiles of the flow between infinite parallel plates. Interfacial instability induced by the viscosity stratification in the microchannel is discussed referring to previous studies on the instability analysis for plane multilayer flow. Exact solution derived in the present study can be used for examining a diffusion process and three -dimensional stability analysis. More works are needed to formulate the equations including the effects of interfacial' tension between immiscible liquids and surface wettability which are important in microscale transport phenomena.

• Wind and Structures
• /
• 제7권1호
• /
• pp.41-54
• /
• 2004

An analysis refinement of the Messina Strait suspension bridge project has been recently required, concerning mainly the yaw angle effects on the multi-box deck section aerodynamics and the vortex shedding at low reduced velocities $V^*$. In particular the possible interaction of the axial flow with the large cross beams has been investigated. An original test rig has been designed at this purpose allowing for both forced motion and free motion aero elastic tests, varying the average angle of attack ${\alpha}$ and the deck yaw angle ${\beta}$. The hydraulic driven test rig allowed for both dynamic and stationary tests so that both the stationary coefficients and the flutter derivatives have been evaluated for each yaw angle. Specific free motion tests, taking advantage from the aeroelastic features of the section model, allowed also the study of the vortex shedding induced phenomena.

• 한국터널지하공간학회 논문집
• /
• 제22권4호
• /
• pp.435-450
• /
• 2020

복층터널의 분기구간은 터널 형상이 모자 모양의 대단면 구간인 '분기 전 확폭구간'과 본선과 분기터널 간 이격이 생기는 '분기 후 구간'으로 나눌 수 있으며, 분기 전 확폭구간의 터널 단면이 분기 후 구간의 단면에 비해 매우 크기 때문에 이러한 차이에 따른 굴착 영향이 분기구의 전체적인 굴착 안정성 검토 시 고려되어야 한다. 본 연구에서는 암반에서 시공되는 NATM 방식의 2차로 대심도(40 m) 본선 복층터널에서 1차로 단층터널로 분기가 되는 조건을 대상으로 3차원 유한요소해석을 통해 분기 전 확폭구간 굴착(선행굴착) 시 굴착공법과 벤치길이 변화에 따라 선행굴착이 분기 후 구간의 굴착 안정성에 미치는 영향을 검토하였다. 그 결과, 굴착공법과 벤치길이 변화에 따른 차이는 상대적으로 작은 편이었으나, 2차원 수치해석에 의한 선행굴착을 고려하지 않은 경우와 강도응력비 비교를 통해 선행굴착이 분기 후 구간의 굴착 안정성에 영향을 미칠 정도로 큰 응력의 변화를 유발함을 확인하였다.