• 한국가구학회지
• /
• 제26권1호
• /
• pp.22-30
• /
• 2015

In order to prevent decay, distortion, bending, twist on wood products such as wooden furnitures, variety of coating materials were developed and used so far. The coating materials for wood finishing can be synthesized by natural resource or petroleum. However, these coating materials can cause contamination of indoor air quality due to emission of volatile organic compounds (VOCs). In this study, commercialized coating materials for wood finishing such as varnish, coat, and stain were evaluated on emission characteristics of VOCs. Among the varnish, eco-friendly products had about 15~46% lower TVOC emission ($1,042{\mu}g/m^2h{\sim}3,257{\mu}g/m^2h$, respectively, than typical product ($7,100{\mu}g/m^2h$). Natural resource based coating material showed lowest TVOC emission level. However, one of natural resource based waterborne stain showed higher TVOC emission level because waterborne stain already contained higher amount of natural VOC. Oil-based stain might not be suitable for indoor use on interior wall and furniture due to exceed amount of TVOC. Based on results, natural resource based coat or waterborne stain are recommenced to use on wood products.

• 대한치과보철학회지
• /
• 제32권2호
• /
• pp.181-194
• /
• 1994

The purpose of this study was to compare the retention and fitness of crown treated with various desensitizing agents on natural teeth. Varnish, dentin primer, bonding agent and potassium oxalate treated groups and control group with no treatment were used. The retention test was executed with the Instron test machine(Instron Co.,U.S.A.) on 24 hours after cementation with zinc phosphate cement. After retention test, the teeth and crowns were washed and recemented. The cemented crowns were embedded in clear resin and sectioned with a diamond saw. The occlusal and marginal fitnesses, were measured indirectly with a stereomicroscopic photographs. The result of this study were obtained as follows : 1. The retention of control group was higher than any other desensitizing agent treated group. 2. The differences of retention among varnish, dentin primer, bonding agent and potassium oxalate treated groups were not statistically significant. 3. There were no statistically significant difference in fitness at occlusal surface and margin among control, varnish, dentin primer, bonding agent and potassium oxalate treated groups. According to these results, desensitizing agents used to protect the pulp from irritation of luting agents may adversely affect the retention of castings. Therefore, desensitizing agents should be used in limited areas carefully.

• 한국가구학회지
• /
• 제11권1호
• /
• pp.45-51
• /
• 2000

일반적으로 도막의 강성은 목재의 강성에 비해 낮으므로 도장된 소재의 강성이 백골재에 비해 낮아질 것으로 짐작할 수 있으므로 본 연구에서 는 바이올린용 소재 인 유럽산 가문비 나무와 단풍나무에 투명 래커와 전통옻칠을 도포한 후, 진동모드를 해석하고 공진주파수를 비교함으로써 수종별 도료 종류에 따른 음향특성의 변화양상을 분석하고자 하였다. 분석결과, 도장전후의 기본진동모드는 동일하였고 양 수종 공히 도료의 종류에 관계없이 도장재의 공진주파수의 감소가 확인되었으며 가문비나무의 경우, 모드가 증가할수록 주파수 감소폭이 증가하였으나 옻칠이 투명래커에 비해 그 감소폭이 적었다. 단풍나무의 경우에도 상위 모드에서 더 큰 주파수 감소를 나타냈지만 옻칠과 투명래커의 주파수 감소폭이 일정치 않았다.

• Restorative Dentistry and Endodontics
• /
• 제15권1호
• /
• pp.97-105
• /
• 1990

When conventional root canal treatment is failed or contraindicated, retrograde root canal filling following apicoectomy is a valuable procedure, aimed at hermetically sealing the root canal against leakage of irritants from the canal into the periapical tissue. In this in vitro investigation, to analyze apical microleakage electrochemically in teeth with different retrograde filling materials and preparation types, single - rooted tooth was cut 2mm from the apex and each Class I and Slot preparation was prepared. Experimental groups : Group 1. Amalgam filling with cavity varnish in Class I preparation Group 2. Scotchbond 2+Silux filling in Class I preparation Group 3. Gutta percha filling with ZOE cement in Class I preparation Group 4. Amalgam filling with cavity varnish in Slot preparation Group 5. Scotchbond 2+Silux filling in Slot preparation Each specimens was immersed in 1% solution of KCl, and applied a potential of 9V external power supply. Measurements of the current flow were obtained at 1, 2, 3, 7, 9, 12, 14, 18, 21, 25 and 28 day after immerson. Marginal microleakage were compared and evaluated. The results were as follows ; 1. The group filled with composite resin with dentin bonding agent shows lower apical microleakage value than the group filled with amalgam following varnish application (P<0.01). 2. In the group filled with gutta percha, apical microleakage value was the hightest 3. There was no significant difference between Class I cavity and Slot type cavity regardless of the used materials.

• 대한소아치과학회지
• /
• 제23권4호
• /
• pp.915-924
• /
• 1996

The purpose of this paper is to investigate the surface roughness of glass ionomer cement during initial setting time followed by applying surface coating agent. No other finishing or polishing procedure is done and each surface coating agents (varnish, adhesive, gloss, sealant) are used after filling of glass ionomer cement. Surface roughness indices(Ra) are measured and surface contours are obtained electronically by Surfcorder SEF-30D(Kosaka laboratory Ltd., Japan). The results are as follows: 1. During initial setting time, surface roughness increases slightly regardless of surface coating agents. But it is statistically insignificant. (p>0.05) 2. Among surface coating agents used, Ra indices of group using varnish are high significantly compared to other groups regardless of elapsed time.(p<0.05) Among the groups which has used other surface coating agents except for the varnish group, similar Ra index all over the experiment is obtained, when compared to control group (no agent). 3. If no surface treatment is performed, tri-cure glass ionomer cement (Vitremer) has higher Ra Index than light cure glass ionomer cement (Fuji II LC) (t<0.05). But there is no difference between two groups in Ra index if any kinds of agents are applied except for sealant. (t>0.05)

• 설비공학논문집
• /
• 제18권3호
• /
• pp.193-201
• /
• 2006

Thermal performance model was developed for a cross-flow aluminum heat exchanger with relatively short passage. Appropriate heat transfer coefficient and friction factor equations for laminar channel flow were obtained considering developing regions. The heat exchanger was analyzed using the unmixed cross-flow ${\epsilon}$-NTU relationship considering leak-age between streams. Thermal contact between corrugations and plates was also considered. Tests were separately conducted for two samples - one made of non-treated aluminum sheets, and the other made of varnish-treated ones. The samples were made by stacking corrugations and plates one after another. The model adequately predicted the thermal performance and pressure drop of the non-treated heat exchanger. The thermal performance of the varnish-treated one was $7{\sim}12%$ overpredicted, and the pressure drop of the varnished-treated heat exchanger was $5{\sim}15%$ underpredicted. The air leakage ratio of the non-treated heat exchanger was $23{\sim}26%$. The ratio decreased to less than $10%$ with the varnish treatment.

• Journal of the Korean Wood Science and Technology
• /
• 제25권3호
• /
• pp.24-28
• /
• 1997

As a way to revive the traditional technology of Korean golden varnish(Hwangchill), the exudates of D. morbifera, this study was carried out at first to investigate the anatomical characteristics and the chemical composition of D. morbifera stems and their exudates. Trees of more than 20 years old were harvested at Wando and Jejudo islands in the southwestern part of Korean peninsula during different physiological seasons of winter, spring, and summer, The results obtained are as follows: 1. In the anatomical aspect of wood, Hwangchil woods is ring-porous wood, has alternate inter-vessel pittings and horizontal intercellular canal in xylem. 2. In the chemical aspect of wood and bark, the general compositions appeared hot to differ from those of other hardwoods, and ash and alcohol-benzene extractives showed little increase with the increase of atmospheric temperature of harvesting season. 3. In the solvent-sequential extraction of bark, wood and exudate, the exudates was extracted up to 80% by ether, but the bark and wood contained a very small amount of ether extractives, about 2% in the bark and 0.5% in the xylem.

• Tribology and Lubricants
• /
• 제38권4호
• /
• pp.121-127
• /
• 2022

This study presents the development of an integrated oil purification system consisting of moisture removal, oil flushing, and oil filtering devices. In this system, the oil flushing device is combined with a micro-bubble generator. Oil purification is necessary for ensuring the high performance of the lubricant through the efficient removal of contaminants and thus enables good maintenance of mechanical systems. The developed purification system removes moisture, varnish, and solid particles. Moreover, during oil purification, the oil flushing device separates foreign materials and contaminants remaining in the lubricating oil piping or mechanical systems. The microbubble generator, which is combined with the oil flushing device, can separate harmful contaminants, such as sludge, wear particles, and rust, from piping or lubrication systems through the cavitation effect. Moisture is removed using a double high-vacuum chamber, while sludge and varnish are removed via electro-absorption using a high-voltage generator. Additionally, the total maintenance cost of the system is reduced through the use of domestically fabricated cartridge filters composed of glass fiber and cellulose. The heater, which maintains the temperature of the lubricant at 60℃, can process 41,000 L of lubricant simultaneously. Multiple tests confirmed that the proposed integrated purification system exhibits good performance in oil flushing and removal of water and varnish.

• 대한치과교정학회지
• /
• 제24권3호
• /
• pp.659-672
• /
• 1994

Dental caries is one of the most prevalent dental diseases in Korea and its prevention is very important in orthodontic therapy. For the cleansing action of saliva itself and/or tooth-brushing is lowered in patient with fixed orthodontic appliance, oral hygiene of the patient becomes worse, which provides more favorable environment for micro-organisms. Chlorhexidine, one of the series of bisguanide, has been reported to be strong antimicrobial agent and very effective on Streptococcus mutans. The purpose of this study is to evaluate the possibility of chlorhexidine as a anticariogenic agent in fixed orthodontic therapy. We used the varnish containing chlorhexidine as a main ingredient for the chemical control of salivary S.mutans in patients with fixed appliance therapy We applied the varnish containing chlorhexidine on the labial and interproximal surface of the teeth before bonding and banding teeth of our patients(N=20) and compared to control group patients(N=20). Before the application of chlorhexidine varnish and four times periodically after the completion of fixed appliance set-up, we sampled saliva of both group patients and incuvate S.mutans for 24 hours. In the culture study of sampled saliva, counting the number of S.mutans colonies, we founded as follows : 1. In patients with fixed appliance therapy, the risk of dental caries increase when it compared to that of preorthodontic treatment ; The number of salivary S.mutans increase in Patient's oral cavity. 2. The experimental agent that contain chlorhexidine is effective to reduce the number of salivary S.mutans. 3. For the effect of this agent is not ever-lasting, periodical application is needed, and additional study for economical interval and number of application is needed.

• 대한소아치과학회지
• /
• 제37권4호
• /
• pp.403-411
• /
• 2010

본 연구는 불소 바니쉬의 백색 병소에 대한 치료 효과를 도포 기간, 빈도 등에 따라 미세경도와 병소 면적 변화를 통해 비교 분석하였다. 실험을 위해 대구치의 치관부를 이용해 레진 블록을 제작하였다. 불소 도포 주기에 따라, 1주군(I군), 2주군(II군), 3주군(III군)으로 분류하여 군당 15개의 시편을 배정하였다. 시편은 카보폴 907을 이용한 인공우식용액에 15일간 침지하여 탈회시켰으며, 이후 인공타액에 넣어 $37^{\circ}C$ 항온기에 보관하였다. 탈회 전, 탈회 후, 불소 도포 후 미세경도와 병소 면적의 변화를 평가하였다. 연구 결과 얻은 결론은 다음과 같다. 1. 미세경도 값은 I군과 비교하여 II군과 III군에서 약 2배의 증가율이 관찰되었으며, I군과 II군, I군과 III군 사이에서 통계적 유의성을 보였으나(p<0.05), II군과 III군 사이에서는 유의성을 보이지 않았다(p>0.05). 2. 색조 측정기를 이용해 관찰한 병소 면적의 변화는 I군과 II군, III군 사이에 통계적 유의성을 보이지 않았다(p>0.05). 이상의 결과에서 불소 바니쉬 도포를 통해 백색 병소의 양적, 질적 개선을 얻을 수 있다고 생각되며, 2주 이상의 주기로 도포를 시행하였을 때 좋은 효과를 얻을 수 있었다.