• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.95-97
• /
• 2005

Loss in the multi-stacked HTS wires are affected by a number of factor, such as, number of wires used in the stack, direction of external magnetic field and insulation thickness between the wire. This paper examines the effects of the insulation thickness on the magnetization loss of the multi-stacked YBCO coated conductor. Measurements of magnetization loss were performed using 4 different typo of multi-stacked wires and under various angle of external magnetic field. Test results show that loss density per unit volume increased for YBCO coated conductors when thickness of insulation increased. Loss density per unit volume decreased for YBCO coaled conductors when stacking number of tapes increased.

• 천문학회보
• /
• 제44권1호
• /
• pp.44.1-44.1
• /
• 2019

Davis-Chandrasekhar-Fermi (DCF) method is a tool that is widely used to obtain the strength of the mean magnetic field projected on the plane of the sky. When there are independent eddies along the line of sight, the variation of polarization angle will decrease by the averaging effect. Therefore, the measured strength of the magnetic field can be overestimated. Cho & Yoo (2016) proposed a modified DCF method considering such effect. By using this, we quantitatively compared the results from the conventional DCF and the modified DCF methods for various sonic Mach numbers and driving schemes (the solenoidal and compressive driving). Here, we present that the modified DCF method does not show a strong dependence on the sonic Mach number or driving schemes either, while the conventional DCF method depends on the sonic Mach number for the compressive driving scheme.

• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.758-763
• /
• 2002

초음파 에너지(28 kHz, 40 kHz, 70 kHz)를 사용하여 수직자기기록용 Ba-ferrite의 자기적 특성 향상에 대하여 조사하였다. 한편, 분산된 Ba-ferrite를 sheet에 수직으로 배향시키기 위해 다양한 형태의 배향기들을 사용하여 실험을 행하였다. Ba-ferrite가 도포된 sheet 중 초음파 에너지가 40 kHz이고 초음파 처리 시간이 2시간에서 자기적 특성인 S. Q. (Squareness Ratio)와 O. R. (Orientation Ratio)값이 각각 0.7831과 2.87로 비교적 좋은 값을 얻을 수 있었다. 이때 얻어진 sheet의 표면 형상을 SEM(Scanning Electron Microscopy)으로 분석한 결과 Ba-ferrite가 자화용이축인 c 축에 수직방향으로 배향되어 수직자기기록용으로서의 응용에 가능성을 보였다. 또한, VSM(Vibrating Sample Magnetometer)으로 자기장의 각도변화에 따른 S. Q.의 측정시, 자기장의 각도가 증가함에 따라 S. Q. 값이 감소하였고 이는 수직자기기록용으로써 가능성을 재확인 시켜주었다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
• /
• pp.1222-1224
• /
• 2005

AC loss is an important factor in the development of superconducting tapes and superconducting power applications. In this paper, magnetization loss in YBCO coated conductor have been measured and compared with Brandt equation. Measurements of magnetization loss were performed under various angles of external magnetic field to consider the anisotropic characteristics of YBCO coated conductors. The results show that measured values of magnetization loss agreed well with the calculated value by using Brandt equation, especially at large degrees of incidence angle. The magnetization losses were strongly influenced by the direction of external magnet field as were expected.

• 한국안광학회지
• /
• 제12권2호
• /
• pp.13-17
• /
• 2007

열증착법으로 제작한 강자성체인 철박막에서 전류와 자기장이 이루는 각도의 변화에 따른 자기저항의 변화를 관찰하였다. 이방상자기저항현상에서 철박막인 경우에는 박막면이 중간자화용이축이므로 PMR 에서 NMR로의 전이가 $34^{\circ}$에서 일어나며 전류가 박막면에 수직인 현상에서는 자기저항피크간격이 니켈박막보다 더 크게 나타나지만 자기저항피크간격의 증가율은 비슷한 경향성을 보인다.

• Journal of Astronomy and Space Sciences
• /
• 제29권4호
• /
• pp.337-342
• /
• 2012

In this study, the transient second or third layer on the topside of the Martian ionosphere were investigated with the most recently released Mars advanced radar for subsurface and ionospheric sounding/Mars Express data obtained from January 2010 to September 2011 to study the correlation between these topside additional layers and surface magnetic fields, solar zenith angle and solar activities. When examining the zones where the topside layer appeared, the occurrence rate of the topside layer was low at the areas with a strong Martian crustal magnetic field as observed by the Mars global surveyor. The occurrence rate of additional layers on the Martian topside ionosphere decreases as the solar zenith angle increases. However, these layers appeared significantly near the terminator of which solar zenith angle is $90^{\circ}$. In comparison between F10.7 which is the index of solar activities and the occurrence rate of the topside layer by date, its occurrence rate was higher in 2011 than in 2010 with less solar activities. The result of this study will contribute to better understanding of the environments in the topside of the ionosphere through the correlation between the various conditions regarding the Martian ionosphere and the transient layer.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.163-163
• /
• 2000

In this research, we used the ion irradiation technique which has an advantae in improving intentionally the properties of surface and interface in a non-equilibrium, instead of the conventional annealing method which has been known to improve the material properties in the equilibrium stat. Cu/Co multilayered films were prepared on SiN4/SiO2/Si substrates by the electron-beam evaporation for the Co layers and the thermal evaporation for the Cu layers in a high vacuum. The ion irradiation with a 80keV Ar+ was carried out at various ion doses in a high vacuum. Hysteresis loops of the films were investigated by magneto-optical polar Kerr spectroscopy at various experimental conditions. The change of atomic structure of the films before and after the ion irradiation was studied by glancing angle x-ray diffraction, and the intermixing between Co and Cu sublayers was confirmed by Rutherford backscattering spectroscopy. The surface roughness and magneto-resistance were measured by atomic force microscopy and with a four-point probe system, respectively. During the magneto-resistance measurement, we changed temperature and the direction of magnetization. From the results of experiments, we found that the change at the interfaces of the Cu/Co multilayered film induced by ion irradiation cause the change of magnetic properties. According to the change in hysteresis loop, the surface inplane component of magnetic easy axis was isotropic before the ion irradiation, but became anisotropic upon irradiation. It was confirmed that this change influences the axial behavior of magneto-resistance. Especially, the magneto-resistance varied in accordance with an external magnetic field and the direction of current, which means that magneto-resistance also shows the uniaxial behavior.

• Progress in Superconductivity
• /
• 제8권1호
• /
• pp.8-15
• /
• 2006

The size of the superconducting domains and the critical current density inside these domains have to be enhanced for most of cryomagnetic applications of melt-textured YBCO bulks. To enlarge the size of the domains we studied the multi-seeding technique based on a well-established procedure for preparing high quality YBCO monoliths using self-made SmBCO seeds. The distance between the seeds was optimised as a result of the investigation of the effects of various seed distances on the characteristics of the grain boundary Junctions. The influences of a-b plane intersections and c-axis misalignments were researched. Thereby, a small range of tolerance of the misorientations between the seed crystals was found. Field mapping was applied to control the materials quality and the superconductor's grain structure was investigated using polarisation microscopy. YBCO function elements with iou. seeds in a line and an arrangement of making type (100)/(100) and (110)/(110) boundary junctions, respectively, were processed. The trapped field profile in both sample types shows single domain behaviour. To demonstrate the potential of the multi-seeding method a ring-shaped sample was processed by placing sixteen seeds in a way to make both (100)/(100) and (110)/(110) grain junctions at the same time. The results up to now are very promising to prepare large single domain melt-textured YBCO semi-finished products in complex shapes.

• 한국방사선학회논문지
• /
• 제5권4호
• /
• pp.161-169
• /
• 2011

본 연구는 입체적 분포를 형성한 시각신경계에 대하여 MRI 시스템의 경사자기장으로써 하나의 스캔 대상단면을 3차원 형태의 여러 방향으로 향하게 하는 다중사위 스캔각도의 변화에 관하여 실험하였고 기존의 단순각도 사방향 검사방법과 비교 고찰 하였다. 입체적 분포를 이루는 뇌의 시각신경계에 대하여 MR 시스템의 경사자기장으로써 국내 정상 성인을 대상으로 시각신경의 사위영상화를 위한 기존의 사위(시상-관상단면) 스캔방법과 다중사위(시상-관상-횡단면) 스캔각도의 변화를 실험하였다. 그 결과 다중각도를 이용한 사위스캔 방법이 기존의 스캔방법에 비해 더 넓은 영역의 해부학적 정보를 나타내는 것을 영상으로 확인하였다. 또한 시각신경을 명료하게 나타내기 위해서는 영상단면두께와 펄스시퀀스의 선택도 고려되어야할 것으로 확인 되었다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제20권3호
• /
• pp.5-10
• /
• 2018

This study presents that various grain boundary junctions are prepared by controlling the seed orientation combined with an artificial hole in a melt process REBCO bulk superconductor. Large grain YBCO superconductors have been fabricated with various grain boundary junctions that the angle between the grain boundary and the <001> axis of Y123 crystal is $0^{\circ}$, $30^{\circ}$ and $45^{\circ}$, respectively. The presence of the artificial hole is beneficial for the formation of clean grain boundary junction and single peak trapped magnetic field profiles have been obtained. Artificial hole makes two growth fronts meet at a point on a periphery of the artificial hole. The presence of artificial hole is not likely to affect on the distribution of Y211 particles. The newly formed <110> facet lines are explained by the formation of new Y123/liquid interface with (010) crystallographic plane.