• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.32-40
• /
• 2016

The characteristics of an optical system vary depending on wavelength and ambient temperature. Based on the thin-lens approximation, we investigate the conditions for stabilizing an optical system against wavelength and temperature variations at the same time. The conditions are applied to designing a laser scanning system consisting of two lenses. The change in the effective focal length of the scanning system against wavelength and temperature variations is very small, as expected.

• International Journal of Industrial Entomology and Biomaterials
• /
• v.4 no.2
• /
• pp.109-115
• /
• 2002

With the objective of selecting suitable breeding resource material, 10 polyvoltine and 10 bivoltine breeds were drawn from the germplasm collection of Central Sericultural Research and Training Institute, Mysore, and evaluated for 3 seasons comprising one year (6 trials). Data were collected on seven traits of economic importance such as fecundity, pupation rate, cocoon yield, cocoon weight, cocoon shell weight, cocoon shell ratio and filament length, and statistically analysed with two-way classification, Joint scoring method and evaluation index. Significant seasonal variations (P < 0.01) were observed in both polyvoltine and bivoltine breeds. Polyvoltines BL27, BL36 and BL54 and bivoltines CSR2, CSR4 and Daizo scored highest ranking values in all the three methods. Hybridization was initiated based on larval markings and cocoon shapes. Seasonal variations were discussed.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.14 no.3
• /
• pp.179-188
• /
• 1981

The authors made an investigation concerning the geographical distribution and some major differentiations in morphological characteristics associated with the each habitat, of the pond smelt, Hypomesus olidus, which was introduced into Korea more than 50 years ago. Major characteristics utilized for the comparison study were upper jaw (maxillary), number of fin rays, scale structure, vertebral count, number of pyloric caeca, number of gill rakers, and the relative measurements of these and other internal characters. 1. The main areas of natural distribution are Paro Lake, Soyang Lake, Han River, Euirim Lake, and Ogjeong Lake (or Unam Lake) and the tributaries of these waters. 2. Morphological variations varied when the mean values of measurements from each area were compared with the standard measurement value by mosaic comparison, and in some instances a significant variation was found. 3. The most significant variations were found in the number of fin rays of pectoral and anal fins; the lengths from the tip of snout to the origin of pectoral fin, from snout to ventral fin, and from snout to anal fin, relative to standard body length; eye depth relative to head length; upper jaw: the number of pyloric caeca and the scale structure. Variations, on the other hand, by each habitat were not clear in the numbers of ventral and dorsal fin rays, gill rakers, vertebrae and lateral line scale : and the depth of caudal peduncle and distance from the tip of snout to the origin of dorsal fin relative to standard body length. 4. The scales of pond smelt showed some differences in the shape of scales, the shape and position of the focus and the number of ridges according to the scale positions on the body. No radii were present. The relations between longitudinal and transverse diameters of the scale suggest that the pond smelts of Soyang Lake and Un-am Lake are closely related, and those of Han River and Euirim Lake are also closely related. 5. The geographical variations in morphology of the pond smelt seem to have resulted from the variations in turbidity, water temperature, salinity (rather conductivity) and currents. 6. From the results obtained, it may be concluded that such factors as supramaxillary, relation between scale length and its breadth, number of caudal vertebrae and eye depth relative to head length may be used as the key characters for the classification of geographical varieties of Pond smelt.

• Computers and Concrete
• /
• v.22 no.1
• /
• pp.39-51
• /
• 2018

This study introduces a new algorithm to determine size independent values of fracture energy, fracture toughness, and fracture process zone length in three-point bending specimens with shallow to deep notches. By using the exact beam theory, a concept of equivalent notch length is introduced for specimens with no notches in order to predict the peak loads with acceptable precisions. Moreover, the method considers the variations of fracture process zone length and effects of higher order terms of stress field in each specimen size. In this paper, it was demonstrated that the use of some recently developed size effect laws raises some concerns due to the use of nonlinear regression analysis. By using a comprehensive fracture test data, provided by Hoover and Bazant, the algorithm has been assessed. It could be concluded that the proposed algorithm can facilitate a powerful tool for size effect study of three-point bending specimens with different notch lengths.

• Structural Engineering and Mechanics
• /
• v.68 no.1
• /
• pp.121-130
• /
• 2018

This study deals with optimum geometry design of laterally loaded piles in a Winkler's medium through the Fully Stressed Design (FSD) method. A numerical algorithm distributing the mass by means of the FSD method and updating the moment by finite elements is implemented. The FSD method is implemented here using a simple procedure to optimise the beam length using an approach based on the calculus of variations. For this aim two conditions are imposed, one transversality condition at the bottom end, and a one sided constraint for moment and mass distribution in the lower part of the beam. With this approach we derive a simple condition to optimise the beam length. Some examples referred to different fields are reported. In particular, the case of laterally loaded piles in Geotechnics is faced.

• Journal of Industrial Technology
• /
• v.26 no.B
• /
• pp.29-34
• /
• 2006

A convective, radiating rectangular fin is analysed by using the one dimensional analytic method. Instead of constant fin base temperature, heat conduction from the inner wall to the fin base is considered as the fin base boundary condition. Radiation heat transfer is approximately linearized. For different fin tip length, temperature profile along the normalized fin position is shown. The fin tip length for 98% of the maximum heat loss with the variations of fin base length and radiation characteristic number is listed. The maximum heat loss is presented as a function of the fin base length, radiation characteristic number and Biot number.

• Plant Resources
• /
• v.6 no.3
• /
• pp.159-164
• /
• 2003

This study was conducted to investigate the relationship between yearly variations of climatic elements and yearly variations of productivity in malting barley. In addition, correlation coefficients among yield and yield components were estimated. The data of yield and yield components were investigated for 10 years from 1991 to 2000. The meteorological data gathered at the Yeosu Weather Station for the same period were used to find out the relationships between climatic elements and productivity. Yearly varation of the amount of precipitation in December and January were large with coefficients of variation(c. v.) of 97.9, 51.3%, respectively, but the variation of the maximum temperature and minimum temperature in April were relative small. Yield, weight of 1,000 grains and culm length were greatly with c. v. of 37.3, 49.3 and 41.3%, respectively. spike length and number of spikes show more or less c. v. of 3.8, 24.7% respectively and number of grains per spike show still less variation with c. v. of 9.4%. Correlation coefficients between temperature of mean, maximum and minimum in February and seed yield and yield components were positively significant at level of 5.1%, respectively. Correlation coefficients between precipitation of April and seed yield were positively significant correlation at the level of 5.1 %, respectively, but the duration of sunshine in April and seed yield were negatively significant at the level of 5.1%, respectively. Correlation coefficients of those, yield components and yield, culm length, spike length, number of grains per spike, number of spikes per $m^2$, weight of 1,000 grains and seed yield were positively significant at the level of 5.1 % respectively.

• Journal of dental hygiene science
• /
• v.7 no.3
• /
• pp.201-205
• /
• 2007

This study was designed to compare the perception of dental hygiene students and general public with respect to minor variations in maxillary anterior tooth size, alignment and their relation to the surrounding soft tissues. Maxillary anterior teeth were intentionally diagrammed in varying degree of deviation with respect to one of three common anterior esthetic discrepancies including variations in crown length, shape of gingival margin, and length of interproximal contact. Seventeen images were generated to be preferentially selected by 2 groups consisting of dental hygiene students and lay people in Busan(total of 216). The obtained results were as follows; 1. Both group preferred gingival margin of lateral incisor to be 0.5mm lower than that of central incisor. 2. Both group preferred the gingival margin shape of central incisor has 1/9 horizontal component of the crown width. 3. Both group preferred length of the interproximal contact has 1/2 of the crown length. The results of this study may be considered to influence the decision making process by dental professionals with respect to designing the anterior esthetic gingival line.

• Preventive Nutrition and Food Science
• /
• v.15 no.2
• /
• pp.113-119
• /
• 2010

The aim of this study was to investigate changes in 7 nutritional components (fatty acid, protein, fat, ash, total dietary fiber (TDF), $\gamma$-aminobutyric acid (GABA), and $\gamma$-oryzanol) of paddy rice (PR) and brown rice (BR) throughout the germination process, as measured at different shoot lengths (10 mm, 20 mm, and 30 mm). With the increase of shoot length, the nutritional components' concentrations increased, as compared to the concentrations measured before germination. Moreover, BR exhibited higher GABA, $\gamma$-oryzanol, and protein than PR. Among the components, TDF, GABA, and $\gamma$-oryzanol showed significant concentration differences throughout germination, while the others exhibited only slight variations. In particular, GABA and $\gamma$-oryzanol were predominantly increased in grains of 10 mm shoot length. These compounds might prove to be important factors from germinated rice. Additionally, the germinated cultivar 'Keunnun' might also prove to be a very important food source, owing to its high GABA and $\gamma$-oryzanol contents. These results suggest that variations in nutritional components related to the increase of shoot length may prove to be important when considering the beneficial aspects of rice on human health.

• Animal Bioscience
• /
• v.36 no.6
• /
• pp.899-907
• /
• 2023

Objective: The better understanding of laying pattern of birds is crucial for developing breed-specific proper breeding scheme and management. Methods: Daily egg production until 50 wk of age of six chicken breeds including one layer (White Leghorn, WL), three dual-purpose (Rhode Island Red, RIR; Columbian Plymouth Rock, CR; and Barred Plymouth Rock, BR), one synthetic dwarf (DY), and one indigenous (Beijing-You Chicken, BYC) were used to characterize their clutch traits and egg production. The age at first egg, egg number, average and maximum clutch length, pause length, and number of clutches and pauses were calculated accordingly. Results: The egg number and average clutch length in WL, RIR, CR, and BR were higher than those in DY and BYC (p<0.01). The numbers of clutches and pauses, and pause length in WL, RIR, CR, and BR were lower than those in DY and BYC (p<0.01). The coefficient variations of clutch length in WL, RIR, CR, and BR (57.66%, 66.49%, 64.22%, and 55.35%, respectively) were higher than DY (41.84%) and BYC (36.29%), while the coefficient variations of egg number in WL, RIR, CR, and BR (9.10%, 9.97%, 10.82%, and 9.92%) were lower than DY (15.84%) and BYC (16.85%). The clutch length was positively correlated with egg number (r = 0.51 to 0.66; p<0.01), but not correlated with age at first egg in all breeds. Conclusion: The six breeds showed significant different clutch and egg production traits. Due to the selection history, the high and median productive layer breeds had higher clutch length than those of the less productive indigenous BYC. The clutch length is a proper selection criterion for further progress in egg production. The age at first egg, which is independent of clutch traits, is especially encouraged to be improved by selection in the BYC breed.