• 약학회지
• /
• 제37권5호
• /
• pp.504-510
• /
• 1993

Human insulin gene is consisted of the polymorphic region with the repeating units, the regulatory sequence, the structural gene including the intervening sequence, and 3'-flanking region. The polymerase chain reaction, which amplifies the target DNA between two specific primers, has been performed for the amplification of human insulin gene and simple one-step cloning of it into Escherichia coli. Out of 1727 nuceotides compared, only 4 sites were variable: 5'-regulatory region(G2101$\rightarrow$AGG); IVS I(T2401$\rightarrow$A); Exon II(C2411 deletion); IVS II(A2740 dejection). The variations at the G2101 and T2401 were the same as those found in one American allele. The other two variations were observed only in the specific Korean allele. And, the enzyme digestion patterns among normal, insulin dependent diabetes mellitus, and non-insulin dependent diabetes mellitus were the same. On the other hand, PCR method showed the possibility of the quickaccess for the polymorphic region in terms of the restriction fragment length of polymorphism.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 춘계학술대회 논문집
• /
• pp.1073-1083
• /
• 2005

Since the operation of subway line 1 between Seoul and Cheongryangri stations in 1974, the rail length and riderships have been increased during the three decades. Furthermore, it was a remarkable increase of line length between 1995 and 2004 by the operation of Lines 5, 6, 7, and 8 within Seoul metropolitan area. This study reports the variations of riderships by the changing urban spatial structure. According to analysis results by station-to-station origin-destination trip tables, there were increasing ridership changes in new stations within new subcenters, while there were little ridership changes in old stations within Seoul and existing subcenters. The levels of competition between the existing and new lines brought about the difference of ridership changes.

• 인간식물환경학회지
• /
• 제24권6호
• /
• pp.619-628
• /
• 2021

Background and objective: Native to the limestone zones of the Korean Peninsula, Zabelia tyaihyonii is a popular plant for landscaping. As it is now classified as a rare species, the conservation of its genetic resources is necessary. Methods: In this study, which aimed to understand the morphological variation of Z. tyaihyonii, 18 characteristics of Z. tyaihyonii from five habitats were examined. Results: Of these 18 characteristics, 16 characteristics showed significant differences among sites, and the coefficient of variation ranged from 5.4% (for corolla lobe number) to 31.3% (for flower number). Notable variations were observed in the size of flower and calyx lobe. When the corolla length and calyx lobe length were used as the classification key of Z. tyaihyonii, the sites were divided into those with small, intermediate, and large values. Hair was observed on the filament of all samples, a finding which conflicts with an earlier report. Rather than classifying Z. tyaihyonii into different species on the basis of corolla length (COL) and calyx lobe length (CALL) values, we recommend modifying the species description to incorporate the variation in these characteristics of interest. Principal component analysis results showed that the first main component was highly correlated with the traits related to the size of the calyx lobe (length: 0.819, width: 0.758), and the second main component was highly correlated with the traits related with the size of the inflorescence (length: 0.790, width: 0.626). Conclusion: Several notable variations were identified among the characteristics related to inflorescence and calyx lobe. There is little genetic exchange among groups, or each group is influenced by micro environmental factors, because sites that are located nearby. In addition, the difference between COL and CALL, which is used as the classification key for Z. tyaihyonii, was divided into small group, large group, and intermediate group, regardless of the sites' geographical distance.

• 패션비즈니스
• /
• 제10권5호
• /
• pp.122-134
• /
• 2006

The purpose of this study was to evaluate the visual effects and images according to changes in the line and length of the connecting lines of the neck, center front, and hem line from analyzing the bolero style shown in 2005 S/S domestic fashion. The basic lines of the bolero were classified into three different categories according to the connecting lines of the neck, center front line, and hem line. We altered the length of the bolero in three categories with changes in the waistline-5cm, waistline-8cm, and waistline-11cm. For the visual evaluation, 9 stimuli were placed in mannequins, and were estimated by the experts in the fashion design. For the visual evaluation according to changes in the line and length of the bolero, we used 12 pairs of items to find the visual effects, and 13 pairs of adjectives to measure the visual images. The stimuli and adjectives were randomly given to the evaluators and were evaluated by the 7-Point Likert Type Scale. The data have analyzed by frequency, factor analysis, anova, scheffe's test. According to the result of factor analysis of the visual effects of the Bolero, the result was classified into 4 factors: the whole silhouette, neck line, breasts and shoulders. According to the result of factor analysis of the visual image of the Bolero, the result was classified into 3 factor: maturity, tenderness, neatness. The visual effects by variations in the line and length of the bolero had significant differences in all factors. The visual images by variations in the line and length of the bolero had significant differences in the maturity, tenderness, but they didn't show significant differences in neatness.

• 설비공학논문집
• /
• 제5권4호
• /
• pp.285-294
• /
• 1993

An oscillatory motion of natural convection in a two-dimensional square enclosure fitted with a horizontal partition is investigated numerically. The enclosure was composed of the lower hot and the upper cold horizontal walls and the adiabatic vertical walls, and a partition was positioned perpendicularly at the mid-height of one vertical insulated wall. The governing equations are solved by using the finite element method with Galerkin method. The computations were carried out with the variations of the partition length and Rayleigh number based on the temperature difference between two horizontal walls and the enclosure height with water(Pr=4.95). As the results, an oscillatory motion of natural convection has perfectly shown the periodicity with the decrease of Rayleigh number, and the stability was reduced to a chaotic state with the increase of Rayleigh number. The period of oscillation gets shorten with the decrease of the partition length and the increase of Rayleigh number. The frequency of oscillation obtained by the variations of stream function is more similar to the experimental results than that of the average Nusselt number. The stability of oscillation grows worse with the increase of Rayleigh number. The transition Rayleigh number for the chaos is gradually decreased with the increase of the partition length.

• Journal of the Korean Wood Science and Technology
• /
• 제15권3호
• /
• pp.1-13
• /
• 1987

This study was carried out to investigate the variations of dimension and exterior shape of vessel elements, morphology of spiral thickening and ray-vessel pit in korean diffuse-porous woods (56 species, 18 families), The tangential pore diameter and vessel element length was increased, whereas the pore number per unit area($1mm^2$) was decreased from pith outwards. The tangential pore diameter was decreased but the length of vessel element was not changed from earlywood to latewood within an annual ring. However, the dimensional variations of vessel element was not able to be recognized among relative positions in peripheral variation. The exterior shape of vessel element could be classified into four types; Type 1 is without tail, Type 2 with ligulate tail, Type 3 with broad taper tail and Type 4 with the very short length between perforations. The distribution frequency of Type 2 and 3 was relatively high in comparision with the others. According to the prominence, distribution position and branched shape, the spiral thickenings could be divided into five types. The spiral thickenings occurred 52% in the species observed. Thus it was doubtful to consider the simple presence of spiral thickening as diagnostic index in diffuse-porous woods. The morphology of ray-vessel pit could be grouped as reticulate, scalariform, oval, linear and coalescent type. Most of species examined showed oval and linear type.

• 소성∙가공
• /
• 제18권2호
• /
• pp.156-159
• /
• 2009

Slot coating has been wide spread in photo-resist coating on the glass for liquid crystal display. Die in slot coater consists of manifold and land. Material comes in inlet of the die and flow into the manifold and then flow out through the land. The coating thickness variations along the die length depend upon inside of die design such as manifold and die land. However the coating thickness variations along the moving direction(coating direction) of the coater depend upon the operational conditions of coater as well as die lip design. The coating behaviors including atmospheric air have been investigated in this study. Die geometries considered in this study were nozzle gap and length of the die lip. Coating gap and coating speed were the variables fur coating operational conditions. When the nozzle gap and length of die lip increased climbing effect of PR on the downstream die lip was reduced. Subsequently uniformity of coating thickness improved. Uniformity of coating thickness also enhanced as coating gap and coater speed increased. The uniformity of coating gap was related to the velocity vector distributions on the coating surface.

• 한국의류학회지
• /
• 제33권2호
• /
• pp.266-275
• /
• 2009

Variations of individual hip shapes are a major obstacle in pattern making for fitness. The drafting method is used for pattern making in today's apparel industry. Whilst catering to a limited number of information such as waist and hip sizes, this method does not cater to variations in hip shape. This paper describes the analysis of hip shapes using 3D body model and tries to make sure the relationship between hip shape and pattern by calculating hip angle and dart amount. We achieved results in analyzing various hip shapes by extracting hip angle. Moreover, various hip shapes can be divided into three types(A, B and C) by the hip angle value($K_{sh}-K_{wsh}$). When we use computerized draping method to make a personalized pattern for a tigth skirt, we easily create complex dart lines automatically. Therefore we achieve the result of individual dart amount such as distance between dart lines and dart areas. C type of hip shape had short dart length, long distance between dart lines and a large amount of dart area. On the other hand, A type had long dart length, short distance between dart lines and small amount of dart area. B type had long length and long distance between dart lines and large amount of dart area. In traditional pattern making, distance between dart lines is usually proportional to amount of dart area because of similarity in dart line shape. In our pattern, there is no proportional relationship between dart line distance and dart area. This means that variations in hip shapes result in a wide variety of dart line curvature resulting in a wide range of dart area. By ensuring an accurate relationship between hip shape and pattern, it is possible to make patterns which result in clothing that not only fits well, but also exhibits other desirable properties.

• 한국동물학회지
• /
• 제8권1호
• /
• pp.1-7
• /
• 1965

The short-necked clam is distributed widely in Korean tidal flats and it is a much an important bivalve quantitatively as to control the production of the tidal flat. The shell of this clam tends to show remarkable morphological variations depending on the habitat. Under a seemingly favorable condition for the growth , the color pattern of shell of the clam is clear and obvious and having less weight and elongated shape, the ratios of shell length to both height and width are small . On the contrary , when the environment appears to be an unfavorable one, the shell is found to be heavy and stunted with smudgy color pattern. If this correlation between could be a basis for the judgement in suitability of growth environment for the clam. In the Ikawazu Bay, Japan, it is revealed that the elongated shell is produced from the coast outside of the Bay (1) , the stunted from the esturay (2) and the intermediate from the floodgate area (3) and the middle of the Bay (4). Followings are the results obtained from the morphological investigation of the claim in this Bay. 1. Relationship between the shell length and the largest shell rib length is linear and between the shell length and the shell width is also linear but with a critical point at the shell length of 17-20 mm. The ratio between the width and the largest rib length at a given shell length increases with the order of 1, 3, 4, and 2. 2. A gradual decreases of the ratio of the shell length to the largest rib length is observed when the former is less than 17-18 mm, and this ratio increases with the shell of longer. Also there is a different range of this ratio in each different location ; the greatest range in 2, the smallest in 1 and 4 being in between. 3. A similar biometric finding is apparent with the ratio between the length and width of the shell and the order in value is 2, 4, 1 and 3. 4. The ratios between the length and the largest rib length of elongated and stunted shell are 0.84-0.86 and 0.89-0.92, respectively , and those between the length and width are 0.40-0.51 and 0.49-0.58, respectively. 5. Generally , the elongated short necked clam shells are products of the tidal flat of good circulation of sea water with high salinity and smaller fluctuations of salinity and temperature within a day. The stunted shells are produced for tidal flats of opposite of above conditions.

• 한국지역사회생활과학회지
• /
• 제20권4호
• /
• pp.571-578
• /
• 2009

This study was to apply the measurement variations of each region of the body to the basic bodice pattern grading and to provide the clothing pattern fit for the human body. Grading variation used in the apparel industry was researched and new grading variation was proposed by analyzing the statistical data of body measurements. The statistical variation in body measurements was applied to set the optimum grading region and variation. Five sizes were used by split grading method and drawn with Bust Circumference and waist length based on the middle size. Differences between the grading pattern and the drawing pattern were analyzed by overlapping them and measuring each region. The measurement variations of drawing patterns between the sizes were very different from those of statistical data. On the other hand, the measurement variations of grading patterns between the sizes and those of statistical data were similar. In summary, the grading pattern by applying the measurement variations to the region of the body was superior to the drawing pattern drawn by the basic measurements for clothing fitness.