• Journal of the Korean Wood Science and Technology
• /
• v.25 no.2
• /
• pp.117-126
• /
• 1997

In fast grown softwood, there are very large changes in material properties going outward from the pith to bark such as anatomical, physical and mechanical characteristics. Some of variations in anatomical properties with annual ring were then examined from Pinus koraiensis, Larix leptolepis, and Chamaecyparis obtusa, which are major softwoods of plantation in Korea. The large variations of annual ring width during young age of tree tended to stabilize after 25year through the transitional period in 17~23year. The ring density was 1.5~2.4 in 1~10year period, and 3.5~6.3 in 30~35year period, in which juvenile and mature wood were certainly assumed to be formed, respectively. Variations of tracheid length showed functional relationships with annual rings as logarithm. Demarcation between juvenile wood and mature wood could be 16~19year, which was determined from increase rate of tracheid length of 0.2%. Cell wall thickness increased with increase of annual ring even though large variations were observed as well. Variations of cell wall thickness within species were pronounced in latewood than earlywood. The increase of cell wall thickness from juvenile wood to mature wood was predominant in Larix leptolepis as 2.0times, and least in Chamaecyparis obtusa as 1.1 times. Cell diameters showed trends of increase during young age of 1~15year, and consistent afterward. The variations of cell diameter between radial and tangential direction were greater in latewood, and most pronounced in Chamaecyparis obtusa.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.853-858
• /
• 2001

Experimental studies were peformed to investigate variations in ductility of shear wall with length of boundary confinement. Eight specimens containg different lengths of confinment zone, which model compressive zone in plastic regions of shear walls, were tested against eccentric vetical load. Stress-strain model for confined concrete was used to predict strength and ductility of the specimens, which was compared to the test results. The results obtained show that failure of the compressive zone occurs in a brittle manner when the stress of unconfined zone softened after the ultimate strength were reached. To enhance the ductility of shear walls with concentrated confinement zone such as barbell-type walls, the ultimate strength of the confinement zone needs to be increased, and for shear walls with distributed confinement zone the length of the confinement zone needs to be extended.

• Journal of the Korean Society of Tobacco Science
• /
• v.6 no.1
• /
• pp.19-24
• /
• 1984

This study was carried out to find out the variations in Burley 21 variety of Surely tobacco. Jeonjul and nine other selected lines of Burley 21 were evaluated. Plant height and several other characteristics were significantly different among tested lines. Especially, Jangsu-1, the earliest flowered line, flowered 5 to 7 days earlier than other lines and had the smallest length width ratio of the largest leaf. Narrow-leaved type, whose length/width ratio of the largest leaf was above 2, 16, was significantly different in number of leaves and weight per unit leaf area from broad-leaved type whose length/width ratio of the largest leaf being below 1.97. Among tested lines, Jeonju (2) - 2 was the best in major agronomic characteristics, yield and physical properties.

• Journal of Fashion Business
• /
• v.15 no.2
• /
• pp.12-22
• /
• 2011

The purpose of this study is to evaluate the differences of visual image on variations in the shoulder strap and length of the one piece swimsuit. Nine samples were examined: 3 variations of the shoulder strap and 3 variations of the swimsuit length. Data have been obtained from 90 fashion design majors and analyzed using Factor Analysis, Anova, Scheffe's Test and the MCA method. The results of the study are as follows: 1) The visual image, according to changes in the shoulder strap and length of the one piece swimsuit, was composed of attraction factor and boldness factor. Attraction was the most important factor in the one piece swimsuit. 2) The visual images according to changes in the shoulder strap of the one piece swimsuits are ranked in the order of one shoulder strap, strapless and two shoulder straps. They are shown to be wanted to dress - sophisticated image and untidy - unique image. 3) As the swimsuit gets shorter, it has more wanted to dress - sophisticated image and untidy - unique image. 4) The number of shoulder straps and swimsuit length do interact with each other in attraction factor and boldness factor. In attraction factor, one shoulder strap and high cut of the one piece swimsuit has the most wanted to dress - sophisticated image. However two shoulder straps and low cut of the one piece swimsuit has the most not wanted to dress - countrified image. In boldness factor, one shoulder strap and high cut of the one piece swimsuit has the most untidy - unique image. However two shoulder straps and regular cut of the one piece swimsuit has the most tidy - ordinary image.

• Journal of the korean society of oceanography
• /
• v.33 no.1-2
• /
• pp.28-34
• /
• 1998

Variations in abundance, size and population structure of Calanus sinicus were studied in the southern waters of Korea in connection with hydrographic conditions during 1991-1992. Abundance was high in April and low in August. This species was concentrated inshore of a coastal temperature front, or around the temperature front in April. The 1st-3rd copepodites dominated in February and April, and adults in August. The mean population stages in February and April were younger than those in other survey months. This suggests that this species mainly reproduced during winter-early spring. In prosome length, the 1st-4th copepodites were larger in April than in other survey months, and the 5th copepodite and adult were the largest in February. Mean prosome length of C. sinicus showed weak inverse relationship with sea water temperature, but it was not statistically evidenced.

• Korean Journal of Human Ecology
• /
• v.18 no.3
• /
• pp.729-740
• /
• 2009

This study is to research on the rate of expansion or contraction according to movement of the lower body of the man their twenties using Rapid Form software. And aim of this study is to get information of ease allowance in developing slacks pattern using 3D body surface scan data through comparison with existing slacks patterns. Considering on the contraction and expansion according to movement, it need to set the more ease allowance in hip circumference than waist circumference, and the more ease allowance in back hip width than front hip width in slacks. In crotch length, the length of front crotch is revealed contraction but the length of back crotch is revealed expansion. It is desirable lowering front waist line and raising back waist line to possess ease allowance in back crotch area. The length of side seam is revealed a little expansion but the length of inseam is showed a great expansion. To develop slacks pattern of scientific approach using 3D body surface scan data, it need to analysis the rate of expansion and contraction of the lower body based on the movement, shear deformation, slip in fabrics and skin, or in fabrics and fabrics, and slip down from waist line.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.1
• /
• pp.137-142
• /
• 2005

Gas-Assisted Injection Molding(GAIM) is an innovative technology for producing plastic parts and has been received extensive attention in the plastic manufacturing industries. But, due to gas-polymer interacting during the gas injection phase, the process has significantly different characteristics from conventional injection molding and, therefore, the control of the process requires much technical knowledge in processing and materials. The experiment was performed about variations of gas-penetration length that is affected by filling imbalance resulting from the structure of runner. The Taguchi method was used for the design of experiment. The most effective factors for the gas-penetration length were the shot size and mold temperature. The most effective factors for the difference of the gas-penetration length were the melt temperature and shot size. This study also discussed the filling imbalance phenomenon in a unary branch runner type mold that has geometrically balanced runner.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 1999.05a
• /
• pp.144-145
• /
• 1999

• Journal of the Korean Society of Costume
• /
• v.67 no.3
• /
• pp.81-98
• /
• 2017

The purpose of this study is to provide basic information for the development of pants patterns with a high level of fit and comfort through calculating surface variations of lower body parts by movement, grouping them into factors, and analyzing how their surface variations link to one another. The achieved results will help determine essential elements for constructing pants patterns, such as key measurements of lower body parts, the amount of ease values and selection of fabrics, which should be taken into consideration for allowing better movement in clothing. The study required lower body 3D scanning of women for analysis, and 13 women between the ages of 20-24 participated in the scanning, which was done by using Artec Eva 3D scanner. Their scanned data were digitalized and converted to measure the values of their lower body surface length and girth in pre-determined positions such as walking, stair climbing and sitting on a chair. These measurements have been statistically analyzed through SPSS 21.0 to obtain the average amounts and rates of extension for each of the measurement item. Some of the highlighted study results are as follows: The surface length and girth measurements were grouped into 4 factors based on their average extension rates. The results from correlation analysis between measurement items within each factor demonstrated that common items linked to all the changes in the values of other items in the three movements. But in most cases, items were not always correlated with each other for different movements. The results also showed that there were correlations between girth measurements, length measurements, and girth and length measurements. Therefore, key measurements for daily pants should be determined within reasonable estimations between relevant measurement items, while the measurements for work pants, which often withstand certain postures or repetitive movements, may require measurement items that are appro priate for, and closely related to, certain movements or tasks.

• Fashion & Textile Research Journal
• /
• v.7 no.1
• /
• pp.63-69
• /
• 2005

The purpose of this study is to evaluate the differences of visual effects by variations in the location of the waistline and the width of the round belt of the basic skirt. The stimuli are 21 samples: 7 variations of the location of the waistline and 3 variations of the width of the belt. The data has been obtained from 43 fashion design majors. The data has analyzed by frequency, factor analysis, anova, scheffe's test and the MCA method. The results of this study are as follows. The visual effects by variations of the location of the waistline and the width of the belt are composed of 3 factors: the shape of the front part of the abdomen, the shape of the side part of the abdomen, and the length of the upper body. The visual effects by variations of the width of the belt have partial significant differences. The visual effects by variations in the location of the waistline have significant differences in all factors. The interaction effects between the location of the waistline and the width of the belt have not significant differences in all factors.