• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.39 no.5
• /
• pp.502-511
• /
• 1994

Investigated were the relationships between plumule elongation characteristics and seedling emergence of 98 varieties including native, improved and red rice varieties of Korea, and varieties from U.S.A., Italy, Japan, etc. under proper and excess soil moisture regimes. Under excess soil moisture condition the seedling emergence and establishment rates were much lower in most of the varieties and the seedling emergence rates were delayed substantially in all varieties employed. The seedling emergence rates were lowest in dwarf and some semi-dwarf varieties showing poor plumule elongation under proper soil moisture condition. The seedling emergence and establishment rates were significantly correlated with the length of mesocotyl, coleoptile and incomplete leaf under both soil moisture regimes, and with the lower first and second internode length under excess soil moisture condition. Average emergence duration showed significant negative correlation with the length of mesocotyl, coleoptile and incomplete leaf under both soil moisture regimes and significant positive correlations with the first and third lower internode length. Based on the standardized partial regression analysis only the variations of mesocotyl and coleoptile length contributed significantly to the varietal difference in seedling establishment rate, and so did the variations of mesocotyl and incomplete leaf length to the varietal differences in emergence speed. In conclusion varieties with greater elongation characteristics of mesocotyl, coleoptile and incomplete leaf are desirable for higher and speedy seedling establishment in dry-direct seeding.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.4
• /
• pp.297-304
• /
• 1989

Development of a more satisfactory program of computing the performance on a multi-tube evaporator with continuous plate fins is attempted in this study. The fluid flow involving a change of phase make the flow properties and fluid friction factor of refrigerants, the heat transfer coefficients of refrigerant and air sides vary significantly. Taking such variations into account, a useful program is developed to predict the steady state performance of a multi-tube evaporator. The program was applied to an evaporator which has outside diameter of 10.05mm, inside diameter of 9.35mm, length of 5.4m and two rows arraied staggered. Then the variations of refrigerant quality, temperature, pressure, velocity, enthalpy, specific volume and air temperature, tube temperature were discussed. Satisfactory results were presented that the degree of superheat at the outlet side was $4.4^{\circ}C$ and the air temperature drop between the inlet and outlet of the air conditioner was $10^{\circ}C$.

• Smart Structures and Systems
• /
• v.21 no.2
• /
• pp.163-170
• /
• 2018

The dynamic response of a finite length thermo-piezoelectric rod with variable material properties is investigated in the context of the fractional order theory of thermoelasticity. The rod is subjected to a moving heat source and fixed at both ends. The governing equations are formulated and then solved by means of Laplace transform together with its numerical inversion. The results of the non-dimensional temperature, displacement and stress in the rod are obtained and illustrated graphically. Meanwhile, the effects of the fractional order parameter, the velocity of heat source and the variable material properties on the variations of the considered variables are presented, and the results show that they significantly influence the variations of the considered variables.

• Structural Engineering and Mechanics
• /
• v.55 no.3
• /
• pp.495-510
• /
• 2015

Free vibration of non-uniform embedded nanoplates based on classical (Kirchhoff's) plate theory in conjunction with nonlocal elasticity theory has been studied. The nanoplate is assumed to be rested on two-parameter Winkler-Pasternak elastic foundation. Non-uniform material properties of nanoplates have been considered by taking linear as well as quadratic variations of Young's modulus and density along the space coordinates. Detailed analysis has been reported for all possible casesof such variations. Trial functions denoting transverse deflection of the plate are expressed in simple algebraic polynomial forms. Application of the present method converts the problem into generalised eigen value problem. The study aims to investigate the effects of non-uniform parameter, elastic foundation, nonlocal parameter, boundary condition, aspect ratio and length of nanoplates on the frequency parameters. Three-dimensional mode shapes for some of the boundary conditions have also been illustrated. One may note that present method is easier to handle any sets of boundary conditions at the edges.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.6 no.3
• /
• pp.193-205
• /
• 1994

A simulation program of the plate finned-tubes condenser widely used in the air conditioning system was developed. The program took into account the variations of the flow properties and fluid friction factor of refrigerant, and the heat transfer coefficients of refrigerant and air sides. The program was applied to a copper tube condenser which has outside diameter of 10.05mm, inside diameter of 9.35mm, length of 5.20m and three rows arraied staggered. Simulation results were such that refrigerant was super-heated state from the entrance to the 0.14m point, two-phase flow from the 0.14m point to the 4.10m point, sub-cooled state from the 4.10m point to the outlet. The degree of sub-cooled was $6.1^{\circ}C$. The variations of refrigerant quality, temperature, pressure, velocity, specific enthalpy, specific volume and air temperature, tube temperature were showed.

• Journal of Microbiology
• /
• v.41 no.2
• /
• pp.157-160
• /
• 2003

To estimate genetic relationships within the genus Rhizopus, genetic variations in 20 strains were investigated by DGGE and PCR-RFLP of rDNA ITS region (ITSI, ITS2,5.8S). The size of the amplified products showed the interspecific polymorphisms, 650 bp,700 bp, and 900 bp. The DGGE approach allowed the separation of PCR amplicons of the same length according to their sequence variations. When the rDNA ITS region was digested with six restriction enzymes, 20 strains were classified into five RFLP haplotypes. The range of similarity between the 20 strains by PCR-RFLP was 42.3-100%. Based on the results of DGGE aud PCR-RFLP, the 20 strains were divided into four groups, R. oryzae, R. stolonifer, R. microsporus and R. homothallicus. Further study of R. homothallicus is required.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.05a
• /
• pp.238-240
• /
• 2008

This paper gives a basic data of the breakdown characteristics of Dry-Air and air based on their dew point and humidity variations in experimental GIS model by applying AC voltage. The breakdown voltage of Dry-Air was increased as gap length had been increased. The characteristics of Dry-air which had low dew point were higher. In the case of air, the breakdown voltage curves were like Dry-Air' s. But the curves were slightly folded up and down because of impurities.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.11 no.9
• /
• pp.788-792
• /
• 2001

Although the general sliding model control has the robust property, bounds on the disturbances and parameter variations should be known a prior to the designer of the control system. However, these bounds may not be easily obtained. Fuzzy logic provides an effective way to design a controller of the system with disturbances and parameter variations. Therefore, combination of the best feature of the fuzzy logic control and the sliding mode control is considered. In this paper, the adaptive fuzzy variable structure controller developed for variables of fuzzy logic. A variable length pendulum system is used to demonstrate the availability of the proposed algorithm.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.1
• /
• pp.15-21
• /
• 1983

In this paper, the theoretical analysis of lateral guiding mechanism in stripe geometry Double Heterojunction Laser Diode is performed. In the analysis, the spatial variations of gain form refractive index profile are modeled by the mathematical form of injected current density and the beam width variations dependence of active layer, stripe width & cavity length have been analyzed by perturbed mode equation.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.4
• /
• pp.79-87
• /
• 2004

The light pattern reflected from a machined surface contains some information like roughness and profile on the projected surface as expected in the Beckmann-Spizzichino model. In applying the theory into a real reliable measuring device, many parameters such as incident light power, wave length, spot size should be kept a constant optical value. However, the reflected light power is likely to change with the environmental noise, the variations of the light source, the reflectivity of the surface, etc. even though the incident light power is constant. In this study, a method for adjusting the incident light power to keep the reflected light power projected on a CMOS image sensor constant was proposed and a simple adjustment algorithm based on PI digital control was examined. Experiments verified that the proposed method made the surface roughness measurement better and more reliable even under variations of the height of light source.