• 전기학회논문지
• /
• 제63권7호
• /
• pp.968-975
• /
• 2014

This paper proposed a evaluation method for individual's subjective preferred location using EEG and emotional assessment. Visual stimulus were sequentially presented a total six points(the top and the bottom of the left, the top and the bottom of the center and the top and the bottom of the right on the screen). EEG were measured from twenty subjects according to each six points. At the same time, we were executed evaluation of subjects preferred location from emotional assessment. Alpha and beta wave were measured in Fp1, Fp2, F7 and F8 location, followed by ten to twenty electrode system. Correlations and variations of alpha and beta wave from each channel were calculated and analyzed. Because of the number of subjects population under 30, we used Speareman test for a correlation analysis between alpha and beta wave. Also, emotional assessments which compose of visual sense harmony, visual sense stability, stability of position and the visibility were performed and were analyzed by average and frequency. After visual stimulus, emotional assessments were performed. From the variance analysis of EEG, beta wave from F7 was appeared statistically significant as significance probability of 0.006. Also, between alpha wave and beta wave appeared a negative correlation(r=-0.190). From the post-hoc test of F7 beta wave, location 1, 5 and 6 appeared to difference statistically significant. Emotional assessment result according to six positions showed 0.00 significance probability. Thus, location and emotional assessment appeared to influence on each other. From the average and frequency analysis of emotional assessment, location 2 showed obtained of best emotional assessment score and appeared lower beta wave than other locations. Finally, most subjects showed a preference for location 2. Through obtained results in this paper, will be helpful to about human emotional assessment and EEG research.

• 한국산학기술학회논문지
• /
• 제16권7호
• /
• pp.4411-4417
• /
• 2015

플라스틱 제품의 사출금형을 위한 게이트 위치의 최적 설계는 다양한 설계에 대한 3차원 사출성형 분석으로 도출할 수 있다. 이 논문은 사출금형에서 게이트 위치의 영향에 관한 연구이다. 게이트 위치는 플라스틱 제품의 생산성과 품질에 결정적인 영향을 미친다. 논문의 목적은 사출기를 사용한 자동차 에어 클리너 상부커버의 제조과정 중에 수지충전, 웰드라인, 사출압력에 대한 게이트의 영향을 분석하기 위한 것이다. 따라서 이 논문에서 이러한 문제들을 분석하기 위한 게이트의 위치는 4가지 경우로 변화를 주었다. 논문에서 각각의 게이트 위치 변화를 고려한 CAE 시뮬레이션은 사출금형공정에서 제품에 나타나는 결함의 원인을 예견하기 위하여 수행되었다.

• Environmental Analysis Health and Toxicology
• /
• 제29권
• /
• pp.13.1-13.11
• /
• 2014

Objectives This study examined variations in the perceptions of dioxin risk among social groups defined by geographical living location, environmental education, and occupation. Dioxin risk perceptions were analyzed according to values, risk awareness, knowledge, and behavioral preferences. Methods A quasi-experimental survey was designed and conducted on individuals from seven experimental groups in Jeonju city, South Korea, including: people living near incineration facilities; people living far from incineration facilities; governmental experts; non-governmental organization members; office workers in developmental institutes or banks; students who were enrolled in environmental-related classes; and students who were enrolled in business-related classes. Results The results show variations among groups in values, awareness and behavioral preferences. Particular attention should be given to the result that groups with higher connectedness-to-nature values show higher willingness-to-act (WTA) for risk reduction. Result s can be summarized as follows. First, awareness is associated with one's geographical setting. Second, values and WTA behaviors are related to one's environmental-related education and occupation. Third, values are significantly related to WTA behaviors. Conclusions Different cultures, in terms of values or worldview, among groups influence their perceptions of dioxin risk and choices of risk reduction behaviors. It is important to consider values in communicating complicated long-term risk management involving public participation. Further research should be continuously conducted on the effects of multiple dimensions of values on one's WTA for risk reduction behaviors.

• 조명전기설비학회논문지
• /
• 제29권7호
• /
• pp.8-13
• /
• 2015

Recently, because a renewable power source must operate as a constant rate in accordance with RPS(Renewable Portfolio Standard), the study of the renewable power sources has been ongoing. Especially because of noise of wind turbine, troubleshooting, and urban greening business, research related with small wind turbine are underway. The economics and reliability are important parts for the activation of small wind turbine, such as solar energy. In this paper, by analyzing the temperature variations for each location and efficiency of power conversion devices in accordance with short period wind speed changes in simulation test, we reviewed the safety about temperature variations of wind generator and the method of selection of power converter.

• Spatial Information Research
• /
• 제5권1호
• /
• pp.11-26
• /
• 1997

본 논문은 제2의 금융중심지로 부상하고 있는 강남구를 사례로 GIS 기법을 활용하여 은행점포의 입지를 분석하였다. 금융자율화 이후 급격한 증가추세를 보이고 있는 은행점포의 수는 상당한 지역적인 편재현상을 나타내고 있다. 통계기법을 활용하여 은행 입지에 영향을 주는 입지요인을 추출하였고, 은행이용 고객들에 대한 설문조사를 통하여 은행점포의 상권을 조사하였다. 이러한 기초자료를 바탕으로 하여 GIS기법을 활용하여 입지분석을 실시하였다. 먼저 은행이용고객들에게 최적의 서비스를 공급할 수 있는 목적함수를 토대로한 입지-배분 모델을 적용하여 추출된 입지와 현재의 은행점포의 입지를 비교하였다. 또한 그리드 연산 기법을 활용하여 잠재 수요력과 잠재 공급력의 차이를 통해 앞으로 은행점포의 신규 설립이 가능한 지구를 추출하였다. 본 연구를 통해 GIS기법을 활용하여 입지분석을 실시하는 경우 제한점과 앞으로 해결되어야 할 문제점에 대해 논하였다.

• Journal of Korean Neurosurgical Society
• /
• 제47권3호
• /
• pp.169-173
• /
• 2010

Objective : The normal anatomic relationships characteristic of the pituitary stalk area were previously thought to involve only one location. The purpose of this study was to re-evaluate the anatomic location of the pituitary stalk and possible varying locations in relation to the tuberculum sellae and dorsum sellae using morphometric evaluation and anatomic dissection of human cadaveric specimens. The surgical implications of the variations are discussed. Methods : The calvaria were removed via routine autopsy dissections, and the brains were removed from the skull while preserving the pituitary stalk. The diaphragma sellae, tuberculum sellae, and the location of the pituitary stalk were examined in 60 human cadaveric heads obtained from fresh adult cadavers. Empty sellae were excluded. Results : The openings of the diaphragma sellae averaged $6.62{\pm}1.606mm$ (range, 3-9 mm). The distance between the tuberculum sellae and the posterior part of the pituitary stalk was 1 to 8 mm. The upper face of the diaphragma sellae appeared flat in 26 (43%), concave in 24 (40%), and convex in 6 cases (10%), with a prominent tuberculum sellae in 4 cases (7%). The location of the chiasm was normal in 47 cases (78%), with a prefixed chiasm in 3 cases (5%) and a postfixed chiasm (17%) in the 10 cases. Four cadaver specimens had prominent tuberculum sellae and other parameters were not evaluated. Conclusion : When opening the chiasmatic cistern, neurosurgeons should be aware about the relationship between the pituitary stalk and the surrounding structures to prevent inadvertent injury to the pituitary stalk.

• BMB Reports
• /
• 제38권2호
• /
• pp.191-197
• /
• 2005

Although the human genome has been nearly completely sequenced, the functions and the roles of the vast majority of the genes, and the influences of single nucleotide polymorphisms (SNPs) in these genes are not entirely known. A modified mutation detection method was developed for large-scale cloning of the possible SNPs between tumor and normal cells for facilitating the identification of genetic factors that associated with cancer formation and progression. The method involves hybridization of restriction enzyme-cut chromosomal DNA, cleavage and modification of the sites of differences by enzymes, and differential cloning of sequence variations with a designed vector. Experimental validations of the presence and location of sequence variations in the isolated clones by PCR and DNA sequencing support the capability of this method in identifying sequence differences between tumor cells and normal cells.

• 복식문화연구
• /
• 제13권6호통권59호
• /
• pp.1011-1022
• /
• 2005

The purpose of this study is to evaluate the differences of visual evaluatations by variations in the location of the waistband of the one-piece dress. The stimuli are 13 samples. The data has been obtained from 30 fashion design majors. The data has analyzed by Factor Analysis, Anova, Duncan's Test and Correlation. The results of the study are as follows. The visual effects by the location of the waistband are composed of 3 factors: the length of the body, the width of the body, the flexuosity of the lower body. The visual image by the location of the waistband are composed of 4 factors: attraction, maturity, attention, elegance. The visual effects by the location of the waistband have significant differnces all factors. (N.W.+6), (N.W.+8) have the best visual effect in the factor of the length of the body, (N.W.+4) in the factor of the width of the body, and (N.W.-12) in the factor of the flexuosity of the lower body. The visual image by the location of the waistband have significant differnces all factors. The higher the band goes, the more positive visual image comes in maturity, attraction, elegance. However, in attention, the lower the band goes toward the hips, the better visual image comes.

• Journal of Korean Society for Atmospheric Environment
• /
• 제15권E호
• /
• pp.55-64
• /
• 1999

The CIT(California Institute of Technology) three-dimensional Eulerian photochemical model was applied to the Greater Seoul Area, Korea for July 24, 1994, a day of the 9-day ozone episode to understand the characteristics of photochemical air pollution problems in the area. The modeling domain was 60km$\times$60km with the girl size of 2km$\times$2km. As the base case emissions, air pollutant emission data of the National Institute of Environmental Research, Korea for the year of 1991 were used with modifications based on EKMA(Empirical Kinetic Modeling Approach) resutls. Comparisons between predicted and observed concentrations showed that the model predicted the peak concentration over the domain reasonably. It was found that the location of the peak ozone concentration was mainly decided by metorological conditions. But the model could not resolve the spatial variations of concentration station by station, which was mainly caused by localized variations in emission and meteorology.

• Smart Structures and Systems
• /
• 제15권3호
• /
• pp.627-643
• /
• 2015

Negative stiffness, previously emulated by active or semi-active control for cable vibration mitigation, is realized passively using a self-contained highly compressed spring, the negative stiffness device (NSD).The NSD installed in parallel with a viscous damper (VD) in the vicinity of cable anchorage, enables increment of damper deformation during cable vibrations and hence increases the attainable cable damping. Considering the small cable displacement at the damper location, even with the weakening device, the force provided by the NSD-VD assembly is approximately linear. Complex frequency analysis has thus been conducted to evaluate the damping effect of the assembly on the cable; the displacement-dependent negative stiffness is further accounted by numerical analysis, validating the accuracy of the linear approximation for practical ranges of cable and NSD configurations. The NSD is confirmed to be a practical and cost-effective solution to improve the modal damping of a cable provided by an external damper, especially for super-long cables where the damper location is particularly limited. Moreover, mathematically, a linear negative stiffness and viscous damping assembly has proven capability to represent active or semi-active control for simplified cable vibration analysis as reported in the literature, while in these studies only the assembly located near cable anchorage has been addressed. It is of considerable interest to understand the general characteristics of a cable with the assembly relieving the location restriction, since it is quite practical to have an active controller installed at arbitrary location along the cable span such as by hanging an active tuned mass damper. In this paper the cable frequency variations and damping evolutions with respect to the arbitrary assembly location are then evaluated and compared to those of a taut cable with a viscous damper at arbitrary location, and novel frequency shifts are observed. The characterized complex frequencies presented in this paper can be used for preliminary damping effect evaluation of an adaptive passive or semi-active or active device for cable vibration control.