• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.198-203
• /
• 2007

The aim of this study is to suppress the high-frequency combustion instability by acoustic absorption through swirl injector with variable air core length. In the previous study, acoustic damping effects on air core (length, shape, volume) and location of the injector in a model chamber were investigated. Through previous results, our study has advanced to the effect of tuned multi-injectors. From the experimental data, it is proved that increasing of numbers of injectors mounted each anti-node point can increase acoustic damping effect. Also, when tuned injectors at 1L, 1T, 1L1T modes simultaneously are installed each anti-node point of model chamber, damping effect of tuned injectors with multi modes is well agreed with it of tuned injectors with single mode.

• Journal of Korea Water Resources Association
• /
• v.31 no.4
• /
• pp.449-457
• /
• 1998

Using a numerical model solving the shallow-water equations, unusual huge run-up heights observed in the lees of both Babi and Okushiri islands were investigated in detail. The effects of incident tsunami widths were particularly examined by adjusting the transverse length of the wave-maker in laboratory and numerical experiments. The calculated run-up heights were compared with the laboratory experimental data. It has been found that the run-up heights in the lee of a conical island are strongly dependent on the ratio of a transverse length of incident tsuanmis to a base diameter of the island. Keywords : shallow-water equations, tsunami, run-up height, conical island.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.38 no.3
• /
• pp.127-136
• /
• 1996

The purpose of this study is to provide with information for the water resources development and management in stream management planning, such as information on the sediment trensport, design of dam and water facilities, river improvement and flood plains management. The major results obtained from the field measurement and analysis of the watershed characteristics, hydraulic and sediment characteristics are as follows ; 1. The rating curve formulas obtained from the analysis of the hydraulic characteristics data collected are ; Q-=110.563 $(H-0.474)^2$ for 0.7m$(H-0.146)^2$ for 0.4m$Sr=aX{^2} {_1} X^{c}{_2}$, in the experimental watershed.

• Fashion & Textile Research Journal
• /
• v.17 no.2
• /
• pp.227-236
• /
• 2015

This study analyzed the lower body type of 30's Korean men to develop a slim-fit pants pattern. As the analysis data, direct measurement data of anthropometric measured value in the 6th Size Korea(KATS, 2010) was used as basic data with 481 men in 30's as analysis objects. The result are as follows. First, the result of analyzing factors for the lower body type classification indicated five factors. Second, the result of executing group analysis (with the independent variable of 5 clusters extracted from the factor analysis)classified the following three types. Type 1(36.8%) displayed a medium height of lower body type, small waist and hip, slim and fit body type with a slim shape between the knee and ankle. The shape between the waist and hip had characteristics of a slight curve and short length. Type 2(35.6%) displayed lowest height of a lower body type that was large and thick between the waist and the hip. The drop value of the waist and the hip was small; therefore, the body type was flat with a minimal curve. The underpart type (below the knee) was the thickest and the length was short. Type 3(27.7%) displayed the highest lower body type, a medium level waist size, flat and narrow waist and belly. This body type had a curve with big drop value of the waist and the hip, lower part from the hip to the ankle (including the knee) and a thick calf with along leg.

• Computers and Concrete
• /
• v.31 no.4
• /
• pp.349-358
• /
• 2023

This paper describes an in-depth analysis on flexural strength of a girder-deck system experiencing a strand debonding damage with various strengthening systems, based on finite element software ABAQUS. A detailed finite element analysis (FEA) model was developed and verified against the relevant experimental data performed by other researchers. The proposed analytical model showed a good agreement with experimental data. Based on the verified FE model, over a hundred girder-deck systems were investigated with the consideration of following variables: 1) debonding level, 2) span-to-depth ratio (L/d), 3) strengthening type, 4) strengthening material thickness. Based on the data above, a new detailed analytical model was developed and proposed for estimating residual flexural strength of the strand-debonding damaged girder-deck system with strengthening systems. It was demonstrated that both finite element model and analysis model could be used to predict flexural behaviors for debonding damaged prestressed girder-deck systems. Since the strands are debonding from surrounding concrete over a certain zone over the length of the beam, the increase of strain in strands can be linked with a ratio ψ, which is L_p/c. The analytical model was proposed and developed regarding the ratio ψ. By conducting procedure of calculating ψ, the ψ value varies from 9.3 to 70.1. Multiple nonlinear regression analysis was performed in Software IBM SPSS Statistics 27.0.1 to derive equation of ψ. ψ equation was curved to be an exponential function, and the independent variable (X) is a linear function in terms of three variables of debonding level (λ), span length (L), and amount of strengthening material (A_s). The coefficient of determinate (R²) for curve fitting in nonlinear regression analysis is 0.8768. The developed analytical model was compared to the ultimate capacities computed by FEA model.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.12
• /
• pp.185-194
• /
• 2000

Rapid Prototyping(RP) techniques have their unique characteristics according to the working principles: stair-stepped surface of parts due to layer-by-layer stacking, low build speed caused by line-by-line solidification to build one layer, and additional post processing to improve surface roughness, so it is required very high cost to introduce and to maintain of RP apparatus. The objective of this study is to develop a new RP process, Variable Lamination Manufacturing using linear hotwire cutting technique and expandable polystyrene foam sheet as part material(VLM-S), and to investigate characteristics of part material, cutting characteristics by using linear hotwire cutting system and bonding. Experiments were carried out to investigate mechanical properties of part material such as anisotropy and directional tensile strength. In order to obtain optimal dimensional accuracy, surface roughness, and reduced cutting time, addition experiments were performed to find the relationship between cutting speed and cutting offset of hotwire, and heat generation of hotwire per unit length. So, adhesion strength tests according to ASTM test procedure showed that delamination did not occur at bonded area. Based on the data, a clover-shape was fabricated using unit shape part(USP) it is generated hotwire cutting. The results of present study have been reflected on the enhancement of the VLM-S process and apparatus.

• Journal of KIISE:Software and Applications
• /
• v.36 no.12
• /
• pp.1034-1037
• /
• 2009

Sign language spotting is the task of detecting the start and end points of signs from continuous data and recognizing the detected signs in the predefined vocabulary. The difficulty with sign language spotting is that instances of signs vary in both motion and shape. Moreover, signs have variable motion in terms of both trajectory and length. Especially, variable sign lengths result in problems with spotting signs in a video sequence, because short signs involve less information and fewer changes than long signs. In this paper, we propose a method for spotting variable lengths signs based on semi-CRF (semi-Markov Conditional Random Field). We performed experiments with ASL (American Sign Language) and KSL (Korean Sign Language) dataset of continuous sign sentences to demonstrate the efficiency of the proposed method. Experimental results show that the proposed method outperforms both HMM and CRF.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.3
• /
• pp.119-126
• /
• 2013

Achieve real-time encryption and video data transcoding, current video encryption methods usually integrate encryption algorithm with video compression course. This paper is devoted to discussing the video encryption technology, by encrypting to avoid unauthorized person getting video data. This paper studied the H.264 entropy coding and proposed of CAVLC video encryption scheme which is combined with the process of entropy coding of H.264 CAVLC encryption scheme. Three encryption levels are proposed. In addition, a scrambling method is also proposed which makes the encrypted frames more robust in anti crack. This method showed more robust video data encryption function and compressive rate.

• Journal of Internet Computing and Services
• /
• v.3 no.5
• /
• pp.9-17
• /
• 2002

CSIX-L1 is the Common Switch Interface that defines a physical interface for transferring information between a traffic manager (Network Processor) and a switching fabric in ATM, IP, MPLS, Ethernet and data communication areas. In Tx, data to be transmitted is generated in Cframe which is the base information unit and in Rx, original data is extracted from the received Cframe. CSIX-L1 suppots the 32, 64, 96, and 123-bit interface and generates a variable length CFrame and Idle Cframe. Also CSIX-L1 appends Padding byte and supports 16-bit Vertical parity, CSIX-L1 is designed using Xilinx 4,1i. After functional and timing simulations are completed. CSIX-L1 module is downloaded in Xilinx FPGA XCV1000EHQ240C and verified. The synthesized CSIX module operates at 27MHz.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.1
• /
• pp.41-48
• /
• 2013

An efficient encryption algorithm based on the Data Encryption Standard (DES) for personal cloud computing environments is presented. The proposed algorithm improves data privacy, security and also encryption speed, compared with the triple DES. The improvement of the proposed algorithm stems from enhanced privacy inherent from the use of spread random interleaver in the place of the known substitution table for initial and final permutations in the DES algorithm. The simulation results demonstrate that the interleaver based DES (I-DES) is found to run faster than the triple DES algorithm and also offer improved security. The proposed algorithm also offers encryption for variable-length data using the Cipher Block Chaining (CBC).