• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.34 no.2
• /
• pp.153-160
• /
• 2010

A magnetocardiogram (MCG) is a recording of the biomagnetic signals generated by cardiac electrical activity. Biomagnetic instruments are based on superconducting quantum interference devices (SQUIDs). A liquid cryogenic Dewar flask was used to maintain the superconductors in a superconducting state at a very low temperature (4 K). In this study, the temperature distribution characteristics of the liquid helium in the Dewar flask was investigated. The Dewar flask used in this study has a 30 L liquid helium capacity with a hold time of 5 d. The Dewar flask has two thermal shields rated at 150 and 40 K. The temperatures measured at the end of the thermal shield and calculated from the computer model were compared. This study attempted to minimize the heat transfer rate of the cryogenic Dewar flask using an optimization method about the geometric variable to find the characteristics for the design geometric variables in terms of the stress distribution of the Dewar flask. For thermal and optimization analysis of the structure, the finite element method code ANSYS 10 was used. The computer model used for the cryogenic Dewar flask was useful to predict the temperature distribution for the area less affected by the thermal radiation.

• Korean Journal of Optics and Photonics
• /
• v.15 no.4
• /
• pp.385-390
• /
• 2004

In this paper, we designed a 4-bit optical true time-delay(TTD) for phased array antennas(PAAs), which is composed of a wavelength-fixed optical source, 2 ${\times}$ 2 optical MEMS switches, and fiber-optic delay lines. A 4-bit TTD with a unit time delay difference of 6 ps for 10-GHz PAAs has been implemented. Measurement results on time delay show an error of -0.4 ps at maximum, corresponding to a radiation angle error of less than 1.63$^{\circ}$. Thus, the TTD implemented in this research performs in excellent agreement with theory. Each TTD line, composed of MEMS switches and fiber-optic delay lines, connected to the corresponding antenna element has insertion loss in between 1.36 ㏈ and 2.40 ㏈ depending upon the setup of the switches. On the other hand, the insertion loss difference between TTD lines was 0.32 ㏈ at maximum for a fixed radiation angle. The TTD structure proposed in this paper might be more reliable and economical than those previously proposed using tunable wavelength sources if proper power equalization either with gain control of RF amplifiers or variable attenuators is achieved.

• Korean Journal of Social Welfare
• /
• v.57 no.2
• /
• pp.41-70
• /
• 2005

The object of the study is to examine the change of social-economic structure and poverty-shape to escape poverty. In Korea, the working poor have been increased by flexibility and division of labor market since the economic crisis in 1997, and are faced with hard conditions due to the vulnerable welfare system. Especially the workers who engage in irregular jobs were increased by restructure of labor market. Besides they are in unstable employment terms such as low payment, low-skill and exclusion from welfare-benefit. Many small independent businessmen are also in danger of poverty for enterprises trend to move abroad by globalization. Poverty policy in our country was focused on the absolute poor class that has relation with old age, unemployment, disable, disease etc, so they were the object of welfare policy. The poverties, however, are increasing rapidly after the economic crisis, and they work so hard but are still poor, that is, participation in labor market doesn't become an element to escape poverty. Thus the emergence of new poverties whose core consists of the working poor becomes to need new poverty policy. The study is to survey change of their economic conditions, their welfare conditions, their experiences and responses of social dangers after the economic crisis, then to explore the policy to escape poverty. As the result of the study, it shows that the working poor experienced many kinds of social dangers like unemployment, decrease of income etc. In their welfare conditions as their responses to the social dangers, the benefit of social insurance, enterprise welfare like legal retirement pay and paid leave and private welfare such as private pension and insurance are low. The working poor are faced with social dangers, moreover, they don't have skill or education for adapting themselves to information society. The study says that it needs variable policies for the working poor to escape poverty, and suggests payment & tax policies as stable income policy, occupational discipline and skill-education for promoting the quality of employment, moreover, social insurance as expansion of social welfare policy and housing & education policies whose objects are the working poor.

• Journal of Distribution Science
• /
• v.14 no.12
• /
• pp.141-151
• /
• 2016

Purpose - Salesperson perceptions of the fairness and accuracy of a performance evaluation system were examined by managerial and professional employees of large organization. The performance evaluation process is central to many personal decisions such as attitude for job and sales performance. This study investigates the relationship between perceived evaluation fairness, job satisfaction, organizational commitment, and sales performance. The main purpose of this study is to develop and empirically test a comprehensive model of salespersons' perceived evaluation fairness on sales performance. For this purpose, we identified the structural relationship between perceived evaluation fairness, job satisfaction, organizational commitment, and sales performance. Also we investigate the mediating effects on job satisfaction and organizational commitment between perceived evaluation fairness and sales performance. Research design, data, and methodology - To empirically test these relationships, data were collected by in-depth interviews from sales managers and questionnaire surveys from 300 salespersons who work for sales area (credit card company, insurance company). Demographically, the overall sample was 91.6% female, 77.9% 30s and 40s, and 34% college educated, with an average tenure with their present organizations of 4 years. The questionnaire was composed of total 20 items dealing with frequency, quality, and consequences of perceived evaluation fairness, job satisfaction, organizational commitment, and sales performance. To test the research hypotheses, collected data analyzed by confirmatory factor analysis (CFA) and structure equation model (SEM). Results - Through extensive and rigorous literature review process of related literature(Perceived evaluation fairness, Job satisfaction, Organizational commitment, Sales performance), research model and research hypothesis was set up. This study obtains the following research results. First, perceived evaluation fairness has a positive effect on job satisfaction, whereas the effects of perceived evaluation fairness on organizational commitment and sales performance did not show statistically significant result. Second, job satisfaction and organizational commitment have complete mediating roles to the relationship between perceived evaluation fairness and organizational commitment, and relationship between perceived evaluation fairness and sales performance. Conclusions - Based on the results, salespersons' perceived evaluation fairness is one of the key independent variable for making high job satisfaction, organizational commitment, and sales performance. Finally the theoretical, managerial implication and research limitations are mentioned in the discussion.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.12
• /
• pp.88-92
• /
• 2017

Owing to the depletion of fossil energy, wind power is attracting attention as a promising environmentally friendly alternative energy source, because it is abundant, renewable, and non-polluting. Wind turbines are divided into horizontal axis wind turbines (HAWTs) and vertical axis wind turbines (VAWTs) according to the direction of the rotating shaft. VAWTs have a low power generation efficiency, but are not affected by the wind direction and, thus, no yaw system is required and their structure is simple. Small VAWTs are attracting much attention because they can generate power even at low wind speeds. In this study, the output voltages and output currents of small VAWTs with gyromill type, hinge type and double door type blades capable of generating power even at low wind speeds were analyzed at variable wind speeds in the range of 1~11 m/s. At the maximum wind speed of 11m/s, the application of the double door type blades achieved 67% and 9% higher wind turbine output voltages than that of the gyromill type and hinge type blades, respectively. As regards the wind turbine output currents, the application of the double door type blades gave rise to 93% and 5% higher results than that of the gyromill type and hinge type blades, respectively. Through this study, the excellent output characteristics and commercialization potential of the double door type blades, which can generate power both at low and high wind speeds, were confirmed.

• Korean Journal of Optics and Photonics
• /
• v.28 no.1
• /
• pp.28-32
• /
• 2017

In this research, we designed an LSPR sensor based on a thin-film multilayer comprising $TiO_2$ and $SiO_2$. The thickness of the overall substrate layer of the suggested multilayer LSPR sensor is limited to 100 nm, and the number of repeating $TiO_2$ and $SiO_2$ thin films is 1-4 within a limited thickness. Additionally, a nanowire structure with a gold thin film of 40 nm, height of 40 nm, period of 600 nm, and line width of 300 nm was formed on the multilayer. To design the variable wavelength-type SPR, the angle was fixed at $75^{\circ}$ and the wavelength was changed. We then simulated the system with the finite-element method (FEM) using Maxwell's equations. It was confirmed that the resonance wavelength became shorter as the number of multilayers increased when the refractive index was fixed. We found that the wavelength changes were more sensitive. However, no changes were observed when the number of the multilayers was three or higher.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.451-460
• /
• 2014

In this paper, we examined the problem of the structural stability according to the patch load of a rectangular plate that reflects the material properties of A6082-T6 is used primarily for marine plant structure. it applied to the four patch loading shapes, the effect of aspect ratio, a boundary condition and calculated the critical elastic buckling load. Calculating the critical elastic buckling load, During the eigenvalue buckling analysis it is applied to the shell181 as 4 node shell element. when the plate subjected to patch loading compare to the plate under a uniform axial compression load, it is possible observed to occur the different elastic buckling behaviour and it could be confirmed that it is affected significantly on a variable position and type of loadings, such as the effect of the aspect ratio. Also, Critical elastic buckling load according to th patch loading type in simply supported rectangular plate a/b=1.0, ${\gamma}b$=200mm are calculated 67%(Loading type I), 119 %(Loading type II), 76 %(Loading type III), 160 %(Loading type IV), respectively. Loading type I and III could be determined with the strong elastic buckling behavior much more than Loading type II and IV.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.4
• /
• pp.213-221
• /
• 2018

South Korea has been reluctant to open its geospatial information overseas to ensure security as a divided country. However, this cannot continue as the domestic and international environments related to geospatial information and the industrial ecosystem of information and communication technologies have been changing dramatically. Within this context, this study aims to analyze the causal relations among relevant variables and how they change and interact with time using a systems thinking process. First, causal maps were created for the domains of national security, map-based convergence service, and corporate competition. Then, the causal maps for each domain were integrated, based on which the points for policy intervention and dominant feedback loops were identified. The analysis results showed that securing the self-sufficiency of domestic geospatial businesses is a key element to determine the whole causal map, and the variable that changes the dominant feedback loop from a vicious circle to a virtuous one is the decision to open geospatial information overseas. In this study, I found the policy leverage that is a policy intervention point that can produce a great effect with little input by building a causal map of the interactions between major variables. This study is significant in that it identified and analyzed the dominant feedback loop as to which causal structure would dominate the system in the long term. The results of this study can be used to discuss not only the impacts of map data overseas opening on the national security and geospatial information industry, but also the interactions in the future when Google or other global companies request to release the geospatial information.

• Journal of Life Science
• /
• v.26 no.6
• /
• pp.737-748
• /
• 2016

By this time, insect antimicrobial peptides (AMPs) have been characterized more than 150 peptides since purification of cecropin in the hemolymph of pupae from Hyalophora cecropia in 1980. Therefore, it is considered that insects are good sources of AMP selection. Insect AMPs are small (low molecular weight) and cationic, and amphipathic with variable length, sequence, and structure. They perform a pivotal role on humoral immunity in the insect innate immune system against invading pathogens such as bacteria, fungi, parasites, and viruses. Most of the insect AMPs are induced rapidly in the fat bodies and other specific tissues of insects after septic injury or immune challenge. Then the AMPs subsequently released into the hemolymph to act against microorganisms. These peptides have a broad antimicrobial spectrum against various microbes including anticancer activities. Insect AMPs could be divided into four families based on their structures and sequences. That is the α-helical peptides, cysteine-rich peptides, proline-rich peptides, and glycine-rich peptides/proteins. For instance, cecropins, insect defensins, proline-rich peptides, and attacins are common insect AMPs, but gloverins and moricins have been identified only in lepidopteran species. This review focuses on AMPs from insects and discusses current knowledge and recent progress with potential applications of insect AMPs.

• Journal of the Korea Concrete Institute
• /
• v.13 no.2
• /
• pp.107-113
• /
• 2001

This study was conducted preliminarily to develop the crack source location technique for plain concrete beam using acoustic emission(AE). Before the main experiment, the test of virtual An source location was achieved in plain concrete block. The sensor layout was mutually compared between triangular layout and rectangular layout. As the results of test, AE source location by triangular layout was evaluated more effective than that by rectangular layout. The specimen to apply he source location technique was man in total nine specimens (each three in 40 %, 50%, 60% of W/C ratio) which the experiment variable was the compressive strength level(W/C ratio). The bending loading method is selected by cyclic loadings to evaluate the degree of concrete damage. It is seen that Kaiser effect and Felicity effect exists through analysis of AE parameters in coming failure experiment. As a result of analyzing the felicity ratio(FR) values, it is shown that this values can be used for evaluating the degree of concerto damage. AE activity is started highly at the 70% of failure load without the compressive strength level. Thus considered by a index in constructing the system of the failure warning at application of the field structure. And the results compared the real cracking location with the source location has perceived by AE monitoring before it is appeared the primary crack by visual observation.