• Journal of the Korean Society of Tobacco Science
• /
• v.21 no.2
• /
• pp.109-118
• /
• 1999

A model predicted describing the effect of cigarette making materials on the level of filter ventilation was developed and evaluated. The developed model was expressed in terms of a linear and quadratic relationship which was validated with experimental measurements for different porosity of plug wrap and tipping paper, unencapsulated pressure drop of filter plug and cigarette column and vent position. Forty-six experimental frequencies were determined as a result of using three levels with five factors Box-Behnken design and analyzed by the multiple regression analysis with backward stepwise in STATISTICA/PC under restricted conditions. The four factors, except filter pressure drop variable, were statistically significant at the level of 0.05 but most of all linear by linear interactions were comparatively lower significant. By the analysis of linear and quadratic regression coefficient, filter ventilation of the cigarette was affected by porosity of plugwrap (5.87, -4.25), porosity of tip paper (5.68, -1.00), vent position (-3.87, 3.08), tobacco column pressure drop (2.56, 0.66), and filter pressure drop (1.50, 0.58) in the decreasing order. It should be emphasized that the major conclusion of this study was not that any particular parameter was linear or quadratic on any limit scale, but that there were highly significant relationships among factors involving linear, quadratic and their interaction and perhaps even linearity between and within factors. While, there is also quite strong evidence that vent position from mouth end and cigarette making materials are reverse relationship on this experimental model. On the basis of the result, it can be concluded that the porosity of the plug wrap and tipping paper has a marked effect on degree of filter ventilation rate. The F-value of plug wrap and tipping paper porosity among five factors were 39.2 and 36.8 respectively with P-value of 0.000 indicating higher significant for both factors. According to the analysis of variance, the model fitted for filter ventilation was significant at 5% confidence level and the coefficient of determination ($R^2$=0.84) was the proportion to variability in the data well fitted for by the model.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.8 no.2
• /
• pp.109-116
• /
• 1988

The strength and load of structure are varied with the Passage of time, and become a process of probability. It is possible to estimate the reliability from the relation between strength and load. Considering the safety, It is reasonable to estimate allowable stress from the safety factor based on the reliability. In this study, the method to estimate probability of fracture, which is index of reliability for rail subjeict to long term fatigue load were examined. In estimation of reliablity it is meaningless to evaluate numerical value especially this difficult case estimating parameter of random variable. To overcome this problem, conventional design method estimating relative reliability were proposed. In this study the Cornell method were examined. The uncertainity of random variale, ie coefficient of variation which is the index of variation of strength and load were considered. The effect of uncertainity related to probability of fracture, and safety factor based on reliability were examined. The results of this study are followed. The reliability of weld metal were influenced by variation of strength more then load, and base metal were influenced by load. It is confirmed that the allowable stress range calculating with factor of safety based an reliability is conservative.

• Korean Security Journal
• /
• no.42
• /
• pp.7-36
• /
• 2015

This study aims at analyzing difference of social Security network, Community unity and local government trust according to socio-demographical features, exploring the relation of social Security network, Community unity and local government trust according to socio-demographical features, presenting results between each variable as a model and verifying the property of mutual ones. This study sampled general citizens in Gwangju for about 15 days Aug. 15 through Aug. 30, 2014, distributed total 450 copies using cluster random sampling, gathered 438 persons, 412 persons of whom were used for analysis. This study verified the validity and credibility of the questionnaire through an experts' meeting, preliminary test, factor analysis and credibility analysis. The credibility of questionnaire was ${\alpha}=.809{\sim}{\alpha}=.890$. The inout data were analyzed by study purpose using SPSSWIN 18.0, as statistical techniques, factor analysis, credibility analysis, correlation analysis, independent sample t verification, ANOVA, multi-regression analysis, path analysis etc. were used. the findings obtained through the above study methods are as follows. First, building a social Security network has an effect on Community institution. That is, the more activated a, the higher awareness on institution. the more activated street CCTV facilities, anti-crime design, local government Security education, the higher the stability. Second, building a social Security network has an effect on trust of local government. That is, the activated local autonomous anti-crime activity, anti-crime design. local government's Security education, police public oder service, the more increased trust of policy, service management, busines performance. Third, Community unity has an effect on trust of local government. That is, the better Community institution is achieved, the higher trust of policy. Also the stabler Community institution, the higher trust of business performance. Fourth, building a social Security network has a direct or indirect effect on Community unity and local government trust. That is, social Security network has a direct effect on trust of local government, but it has a higher effect through Community unity of parameter. Such results showed that Community unity in Gwangju Region is an important factor, which means it is an important variable mediating building a social Security network and trust of local government. To win trust of local residents, we need to prepare for various cultural events and active communication space and build a social Security network for uniting them.

• Journal of Wetlands Research
• /
• v.13 no.3
• /
• pp.499-514
• /
• 2011

An underlying assumption of traditional hydrologic frequency analysis is that climate, and hence the frequency of hydrologic events, is stationary, or unchanging over time. Under stationary conditions, the distribution of the variable of interest is invariant to temporal translation. Water resources infrastructure planning and design, such as dams, levees, canals, bridges, and culverts, relies on an understanding of past conditions and projection of future conditions. But, Water managers have always known our world is inherently non-stationary, and they routinely deal with this in management and planning. The aim of this paper is to give a brief introduction to non-stationary extreme value analysis methods. In this paper, a non-stationary hydrologic frequency analysis approach is introduced in order to determine probability rainfall consider changing climate. The non-stationary statistical approach is based on the conditional Generalized Extreme Value(GEV) distribution and Maximum Likelihood parameter estimation. This method are applied to the annual maximum 24 hours-rainfall. The results show that the non-stationary GEV approach is suitable for determining probability rainfall for changing climate, sucha sa trend, Moreover, Non-stationary frequency analyzed using SOI(Southern Oscillation Index) of ENSO(El Nino Southern Oscillation).

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.11
• /
• pp.259-272
• /
• 2019

Steel-concrete single-leaf blast-resistant doors are protective structures consisting of a steel box and reinforced concrete slab. By the domestic blast-resistant doors, the structure is not designed efficiently because few studies have examined the effects of variables, such as the blast pressure, rebar ratio, and steel plate thickness on the structural behavior. In this study, the structural behavior of the doors was analyzed using the FE method, and the support rotation and ductility ratio used to classify the structural performance were reviewed. The results showed that the deflection changes more significantly when the plate thickness increases than when the rebar spacing is a variable. This is because the strain energy absorbed by the door is reduced considerably when the plate thickness increases, and as a result, the maximum deflection becomes smaller. According to a comparison of the calculated values of the support rotation and the ductility ratio, the structural performance of the doors could be classified based on the support rotation of one degree and ductility ratio of three. On the other hand, more explosion tests and analytical studies will be needed to classify the damage level.

• Journal of Distribution Science
• /
• v.13 no.2
• /
• pp.63-73
• /
• 2015

Purpose - Satisfaction with service is evaluated according to customers' subjective judgment. The expected value of customer service and its evaluations depend on the customers' position. The customer recognizes two different forms of service levels. One is satisfaction and the other is dissatisfaction. Customers who are satisfied want to receive the service in future. However, those dissatisfied try to change the service. The service provider tries to improve the service. There are two different service cycles. One is the successful cycle and the other is the failure cycle. This study aimed to empirically determine the effects of the justice and authenticity of service recovery on customer behavioral intention through an integrated approach to cognitive justice and psychological authenticity. Research design, data, and methodology - Based on a literature review, justice of service recovery was categorized into three types: distributive, procedural, and interactive. Then, authenticity was added to obtain four independent variables, along with recovery satisfaction as a parameter. Behavioral intention, as an outcome variable, was divided into the repurchase intention and positive word-of-mouth. The model and hypotheses were created and measurement items were developed. A questionnaire survey of items concerning the service recovery experience at family restaurants was conducted on college students and residents in Gwangju from September 30 to October 31, 2013. A total of 400 copies of the questionnaire were sent out and 385 were returned. Respondents answered questions about the importance of, and satisfaction with service recovery on a 5-point Likert scale. Excluding 174 copies without service failure experiences and 7 inappropriate copies, 204 copies were analyzed using SPSS 21.0 for Windows and AMOS 20.0 to determine the reliability and validity of measurements. The hypotheses were tested through a goodness-of-fit analysis. Results - First, distributive justice positively affected recovery satisfaction. Second, procedural and interactive justice had no impact. Third, authenticity positively affected recovery satisfaction. Fourth, distributive justice had relatively stronger effects on recovery satisfaction than authenticity. Fifth, recovery satisfaction significantly affected repurchase intention and positive word-of-mouth and it proved effective in mediation. Finally, additional analysis was performed for descriptive statistics of the principal variables by various demographic characteristics and significant differences were found in gender, occupation, and so on. Conclusions - This study has academic significance as the fairness and authenticity of service recovery were investigated to reveal the effects on behavior. The findings could be applied to a wide range of service recovery strategies. However, there are some limitations. First, data was collected only from the residents of Gwangju and most respondents were aged 20-30. Future studies should target a wide range of areas and age groups. Second, because the questionnaire used in this study targets only convenience family restaurants, the results of this study cannot be generalized to all services companies. Future research should be done on a wide range of industries such as hotels, airlines, and hospitals, and perform a comparison between sectors.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.43 no.9
• /
• pp.1462-1466
• /
• 2014

In this study, an attempt was made to produce oat protein concentrates from defatted oat groat by alkali extraction. Independent variables formulated by D-optimal design were NaOH concentration (X1, 0.005~0.06 N) for extraction and precipitation pH (X2, pH 4.0~6.0), and the dependent variable was extraction yield (Y1, %). Experimental results were analyzed by response surface methodology to determine optimized extraction conditions. Extraction yield increased both with an increase in NaOH concentration of the extraction solution and when approaching a precipitation pH of 4.9, and NaOH concentrations were a major influencing parameter. Solubility of oat protein concentrates showed a minimum value (i.e., 0.1%) at pH 5 and increased substantially at pH values in the range of ${\leq}$ pH 3 or ${\geq}$ pH 7, reaching a maximum value at pH 11 (i.e., 76%). Regression equation coincided well with the results of the experiment. Optimized extraction conditions to maximize extraction yield were 0.06 N NaOH (X1) for extraction and pH 4.7 (X2) for precipitation.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.71-78
• /
• 2015

Purpose - This study attempts to analyze whether or not there are characteristics among the top management of companies that promote corporate performance at venture companies. It investigates the characteristics of the human and social capital that are inherent in top management at a venture company and conducts an empirical analysis of hypotheses examining if these characteristics will affect utilization of the governmental R&D support system as well as affect the firm's initial success. Research design, data, and methodology - This study conducted theoretical and empirical research together to accomplish the goal of the study. The pilot study researched human capital and social capital as the independent variables; the governmental R&D support system as the parameter; and, the initial success as the dependent variable. The empirical study carried out research on the model, establishment of hypotheses, and the statistical treatment. A survey was conducted targeting top management of high-tech venture companies in Daedeok Innopolis; 500 questionnaires were distributed; and, 222 were collected. Results - The human and social capital inherent in top management at venture companies in the early stages of their existence become good evaluation data for those who are invested in similar resources. If top management includes strong human and social capital, access to external resources will be easier; these will have a positive influence on the selection of overnmental support systems; and, this proper support will also have a positive influence on the initial success of the venture company. The results revealed the following. First, it was found that when the educational level and functional background, (the top management human capital), are the output function, top management human capital had a significant influence on selection of governmental R&D support funds. Second, it was found that the internal social capital and external social capital, (the top management social capital), had a significant influence on selection of governmental R&D support tasks. Third, it was found that selection of the governmental R&D support tasks at the start of the venture company had a positive influence on the corporate financial performance such as sales, business profits, and the increase in workers; and, had a significant influence on nonfinancial performance such as market share, competitive position, product competitiveness, and the future product development. Conclusions - Selection of the governmental R&D support system is not recognized as part of the direct sales of a venture company in its early stages, but as it can reduce costs for technical development and helps significantly in creating test products and mass production, it has a positive influence on the company's financial performance and nonfinancial performance as a result. Therefore, companies should take great efforts to frequently be selected as a candidate in the governmental R&D support system, as it can help facilitate R&D that requires extensive funds. As a result, companies can expect effects such as job creation and patent applications and they can advance future product sales.

• Journal of Distribution Science
• /
• v.15 no.6
• /
• pp.77-96
• /
• 2017

Purpose - This study aims to develop correspondence strategies to the environment change in domestic retail store types. Recently, new types of retails have emerged in retail industries. Therefore, trade area platform has developed focusing on the speed of data, no longer trade area from district border. Besides, 'trade area smart' brings about change in retail types with the development of giga internet. Thus, context shopping is changing the way of consumers' purchase pattern through data capture, technology capability, and algorithm development. For these reasons, the sales estimation model has been shown to be flawed using the notion of former scale and time, and it is necessary to construct a new model. Research design, data, and methodology - This study focuses on measuring retail change in large multi-shopping mall for the outlook for retail industry and competition for trade area with the theoretical background understanding of retail store types and overall domestic retail conditions. The competition among retail store types are strong, whereas the borders among them are fading. There is a greater need to analyze on a new model because sales expectation can be hard to get with business area competition. For comprehensive research, therefore, the research method based on the statistical analysis was excluded, and field survey and literature investigation method were used to identify problems and propose an alternative. In research material, research fidelity has improved with complementing research data related with retail specialists' as well as department stores. Results - This study analyzed trade area survival and its pattern through sales estimation and empirical studies on trade areas. The sales estimation, based on Huff model system, counts the number of households shopping absorption expectation from trade areas. Based on the results, this paper estimated sales scale, and then deducted modified probability model. Conclusions - In times of retail store chain destruction and off-line store reorganization, modified Huff model has problems in estimating sales. Transformation probability model, supplemented by the existing problems, was analyzed to be more effective in competitiveness business condition. This study offers a viable alternative to figure out related trade areas' sale estimation by reconstructing new-modified probability model. As a result, the future task is to enlarge the borders from IT infrastructure with data and evidence based business into DT infrastructure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.487-493
• /
• 2017

The main purpose of this study is to evaluate the main parameters involved in the asphalt pavement distresses, including IRI (International Rough Index), fatigue, and permanent deformation. The main parameters are the region (Seoul and Busan), traffic level, asphalt binder, maximum aggregate of surface course, thickness of the surface course and base. A total of 64 case studies were carried out under the auspices of the KPRP (Korea Pavement Research Program). From the analysis of the KPRP test results, the key factors for the asphalt pavement distress were determined. Considering the effect of one variable in the basic condition, asphalt binder was the major factor having an effect on the distresses for an AADT (Annual Average Daily Traffic) of 5000 in the Seoul area. Among the remaining factors, the results were found to be in the order of the base layer thickness (A), surface layer thickness (B), and aggregate particle size thickness (D). The same results were obtained for an AADT of 10000. In the case of Busan with an AADT of 5000, the same result was obtained as for Seoul. Among the remaining factors, the results were in the order of the base layer thickness (A), aggregate particle thickness (D), and surface layer thickness (B). Even though there was a slight difference in the effect of the traffic level and region, asphalt binder was the parameter having the greatest effect on the asphalt pavement distress. In the case where the effect of multiple parameters was analyzed, the combination of the asphalt binder and base thickness showed a relatively strong effect.