• 대한물리치료과학회지
• /
• 제25권2호
• /
• pp.47-54
• /
• 2018

Purpose: The purpose of this study was to investigate the most effective exercise position of Latissimus dorsi's activities during Pull up, Push up and Lat pull down among few positions of hand grips(pronation, Supination and neutral grip) and grip widths(30cm, 60cm) based on EMG activities. Method: 10 healthy adults were participated in this study and the surface EMG activities of the Latissimus dorsi were measured during Pull up, Push up and Lat pull down exercise according to specific hand grip and grip width positions. The maximum and mean value of Latissimus dorsi's EMG activities at all positions were recorded and analysed by ONE-WAY REAPTED ANOVA. Results: The showed that the most Latissimus dorsi's activities is during Pull up exercise. Main results are as follows 1)maximum value: For Pull up, among all studied positions, Rt Latissumus dorsi, position of Supinated grip and 60cm grip width showed strongest muscle activation based on maximum EMG value. Statistical significance was assumed at p<.05. 2)mean value: For Pull up, among all studied positions, Both Latissimus dorsi, position of pronated grip and 60cm grip width showed strongest muscle activation based on mean EMG value. Statistical significance was assumed at p<.05. Conclusion: Therefore, taking the results of this study, Pull up exercise would be the best exercise of Latissimus dorsi's activation. It is recommended to do in pronated grip position and 60cm grip width during Pull up to make body fit.

• 대한영양사협회학술지
• /
• 제2권1호
• /
• pp.49-61
• /
• 1996

For the purpose of disclosing the relationship between job characteristics and satisfaction and organizational commitment for foodservice employees, questionnaire survey was carried out on 427 subjects of 14 general hospitals in Seoul, Korea. Questionnaire items consisted of general characteristics, organizational commitment, job satisfaction and characteristics. Data were analyzed by ANOVA, Duncan's multiple range test and Pearson correlation using SPSS PC package. The results were as follows 1. Mean score of value commitment and commitment to stay were 3.57 and 3.67. 2. There were significant differences between value commitment and age, marital status department, period and management, and between commitment to stay and experience and management. 3. Mean score of job satisfaction was the highest in co-workers(3.37) and work itself (3.37) and followed by in supervision(3.25), wage(2.43) and promotion(2.01). There were significant differences between job satisfaction for work itself and age, educational status and job department and management, between job satisfaction for wage and position, department, period and management, between job satisfaction for supervision and age, educational status and department, between job satisfaction for promotion and age, marital status, position, period, and management, between job satisfaction for co-workers and sex and educational status. 4. Mean score of job characteristics was the highest in dealing with others(4.13) and followed by in feedback(3.51), autonomy(3.29), task identify(3.07), variety(2.71) and friendship(2.47). 5. Job satisfaction for work itself, supervision and co-workers were significantly increased with increasing value commitment. Job satisfaction for work itself, supervision were significantly increased with increasing commitment to stay. Job satisfaction for promotion had negative correlation with organizational commitment in all job position. 6. Value commitment had significantly positive correlations with variety, autonomy, identity, feedback and dealing with others, and significantly negative correlation with friendship. Commitment to stay had significantly positive correlations with dealing with others, and significantly negative correlations with friendship. In all job position organizational commitment had significantly negative correlations with friendship.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.170-170
• /
• 2000

This paper deals with on-Line detection of strip movement and real time positioning of brackets of EMD connected with it. Strip movement is detected by 4 line CCD camera and measured position correction value is inputted to motor position controller to control position of brackets.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.493-498
• /
• 1993

This paper proposes a high precision measurement technique to obtain the height of gage block. The proposed technique is consisted of two steps : In the first step, laser position transducer and electric micrometer are adopted to obtain a coarse value of the height of gage block, and then, second, heterodyne laser interferometry is adopted to acquire the precision value. The experiment results show that accuract in the order of a few nanometer is achieved for the gage blacks of as high as a few millimeter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.1858-1862
• /
• 2005

Stepping motor normally operates without feedback and may loss the synchronization. This problem can be prevented by using positional feedback. This paper introduces one method for closed loop control of stepping motor and a method for combining full-step control and micro-step control. This combination controlling apparatus can perform position control with high accuracy in a high speed, so that it will not suffer from vibration (or hunting) problem when stopping motor. Controlling apparatus contains a position counter block for detecting rotor position of stepping motor, a driving block for supplying current to windings of stepping motor, a control block for comparing output signal of position counter block with command position (desired position) and outputting current command signal based on deviation between current position and command position of rotor. To output current command signal, the control block refers to a sine wave data table. This table contains value of duty cycle of Pulse Width Modulation signal. As the second object of this paper, the process of building this data table is also presented.

• 대한치과보철학회지
• /
• 제30권1호
• /
• pp.125-132
• /
• 1992

The purpose of this study was to evaluate the effect of the metal coping design on the fracture resistance of ceramometal crown. The Ni-Cr alloy(Supranium, Krupp Co., German) and Vaccm-fired porcelain powder(Vita VMK 689, Vita Co., Germany) were used in this study. The measurement of fracture resisitance of ceramometal crown was done with Instron Universial Testing Machine(Instro Co., Model no.4201). The obained results were as fellows : 1. The fracture resistance measured at the buccal cusp tip was the highest value in the group that those position of ceramometal junction was 2mm superior to the lingual finshing margin(100.25Kg) and the fracture resistance revealed on order of the group that those position was 2mm buccal to the central groove(51.64Kg). 2. The fracture resistance measured at the central groove was higher value in the group that those position was 2mm lingual to the central groove than in the group that those position was 2mm lingual to the central groove than in the group that those position was 2mm superior to lingual finishing margin(132.48Kg). 3. In all cases, the fracture resistance at the central groove was higher than that at the buccal cusp tip.

• 수산해양기술연구
• /
• 제17권1호
• /
• pp.19-28
• /
• 1981

Accuracy of the position fix obtained by navigation with Omega in the capacity of worldwide navigation depends on the predicted propagation correction. The authors observe continuously the phase differences of the A-C pair and the A-E pair from April 17 to October 14, 1980, at Busan(35\ulcorner07'. 9N, 129\ulcorner06'. 3E), and analyze the characteristic of daily variation the relation between the theoretical PPC and the measu red PPC to study the accuracy of the position fix. The results are as follows: 1. The results of fourier's analysis for the theoretical PPC and the measured PPC are positive correlation in the coefficients ao, a2, a3 with A-C pair and in the coefficients aO-a3 with A-E pair, and those PPC are apparent to daily periodicity during all measured time. The initial phase is around to 280\ulcorner with A-C pair and 1800 with A-E pair. 2. Daily variatons of the phase difference tend to decrease and the time width to narrow from April toward July, but these variations are opposed to those from July toward October. 3. Mean value of total errors of the position fix by theoretical PPC is 2.67 miles and its standard deviationis O.90miles. 4. Mean value of total errors of the position fix by the measured PPC is 0.63 miles and its standard deviation is 0.217 miles.

• 한국응급구조학회지
• /
• 제14권1호
• /
• pp.5-18
• /
• 2010

Objective : This study compares Video laryngoscope and Direct laryngoscope in tracheal Intubation on rapidity and accuracy by paramedic and aims to improve efficiency of airway management and survival rate in pre-hospital treatment for the patients with severe trauma, cardiac arrest or dyspnea caused by acute diseases. Methods : 60 paramedics were recruited from 13 fire stations located in C province. With the consent of the paramedics, likelihood ratio test was carried out and they were divided into two different groups; DL group (30) and GVL group (30). Regarding intubation conditions, difficult airway grade I, grade II and grade III as well as sniffing position and neutral position were examined. This study also compared between ambulance in motion and in stand still. Frequency, average and standard deviation were analyzed with statistics program, SPSS WIN 17.0 and repeated measure design was introduced to examine inter-relations between position, grade and groups. Results : Intubation was performed more rapidly in neutral position and GVL than in sniffing position and DL(F = 15.260, p = .000). Rapidity value was better with grade I and grade II than grade III and better with GVL than DL(F = 32.629, p = .000). Accuracy value was higher with neutral position and GVL than sniffing position and DL(F = 5.008, p = .011). grade III was less accurate than grade I, grade II and GVL was more accurate than DL(F = 10.966, p = .000). Ambulance motion status did not show any statistically significant differences in accuracy and rapidity. Conclusion : Given this study results, neutral position is better for the patient with severe trauma. For a better survival, GVL intubation can be considered since GVL can enhance accuracy as well as rapidity regarding difficult airway. Since there is no significant differences in ambulance motion factors, intubation can be recommended even in moving ambulance for shortening traveling time to a hospital.

• 한국음향학회지
• /
• 제26권1호
• /
• pp.48-54
• /
• 2007

본 논문에서는 수중에서 이동체의 3차원 위치를 추정하기 위한 위치추적 시스템을 구현하였다. 본 연구에서는 네 개의 초음파 센서를 수중의 서로 다른 위치에 고정시키고, 이동중인 이동체 센서와 서로 다른 신호를 송 수신하게 함으로써 고정체와 이동체 모두에서 이동체의 3차원 위치 추적과 이동체의 원격제어를 가능하게 하였다. 또한 위치 추적 시에 Newton 알고리즘에서 매 iteration 시에 Jacobian 행렬의 norm을 추정하고, 행렬의 norm이 임계값 이상이 되어 역행렬에 의한 해가 불안정해질 때는 또 다른 초기값을 이용하여 해를 구하게 함으로써 이동체의 위치가 보다 신뢰성 있게 추정되게 하였다. 그리고 제안한 알고리즘을 이용하여 실시간 위치 추적이 가능한 위치 추적 DSP 시스템을 구현하였으며, 성능 검증을 위한 수조 실험을 수행하였다. 성능 검증결과 본 연구에서 구현한 위치 추적 시스템은 1초에 2회 이상의 속도로 오차율 5cm 이내에서 이동체의 위치를 추적함을 알 수 있었다.

• 품질경영학회지
• /
• 제38권1호
• /
• pp.10-19
• /
• 2010

The competitive strategies of the Korean manufacturing companies have changed from the "cost leadership" strategy in the early developing stage since 1960's to the "stuck in the middle" position since 1990's in the face of emerging new cost leaders as the Chinese companies. The data on the strategic contents of the Korean manufacturing companies show that their strategies are seeking the value innovation through not only quality improvement but also cost reduction altogether rather than selecting one on the trade-off relation between the both competitive dimensions. Their strategic actions seem to be seeking the operational efficiencies through all the value chain activities rather than the strategic effectiveness by selecting and focusing on the specific competitive dimension, which is considered as a typical strategic approach. Their strategy seems to be non-strategic in the general sense. But their non-strategically looking behaviors can be reasonable enough for their sandwiched competitive position between the global quality leaders and following cost leaders. This paper explains why their strategies can be right through the theoretical explanations by using the quality-price elasticity approaches for the consumer behaviors. We can call their strategic activities as the value innovation strategy.