• 대한임상전기생리학회지
• /
• 제5권2호
• /
• pp.85-93
• /
• 2007

Summary of background data: It is researched until now and the researches against the effect of position cold treatment the effect which pain threshold, change of skin temperature, researches the effective stiffness, the coldness in the patient it applied and relax an inflammation do the researches against were insufficient. Purpose: This project was to see how much it gives effect by using the cold air therapy an inflammation relief of rheumatoid arthritis patient. Methods: The medical subjects were 10 people from standard to diagnosis category of American College of Rheumatology(ACR) who had rheumatoid arthritis and to inspect informations about inflammation relief, have inspected ESR(erythrocyte sedimentation rate) and WBC(white blood cells). The experiment method was to let the patient bend the joint and lay down flat and treat with cold air from 10 cm away from joint line repeating 5 minutes treatment 1 minute rest and 3 minutes treatment. ESR and WBC cold air therapy reported with 5 days gap and each patient has been applied for 3 times. Result: The 5th day and 10th days ESR and WBC value shows when using cold air therapy, there was a reduction on rejected group but didn't last long, but 15th day it showed only on WBC it had its attention. Conclusions: So the cold air therapy shows it has positive effects on inflammation relief of rheumatoid arthritis patient.

• 기술사
• /
• 제13권4호
• /
• pp.31-47
• /
• 1980

Since medium and small manufacturing enterprises have , played a very important role not only in national economy but also in political and social relationships all of the countries in the world have paid favorable policies and programmes for protecting and promoting this sector. In Korea main ingredients of promoting policy for this sector consist of (1) encouragement to modernize facilities and rationalize operation (2) special priority in bank loan (3) promotion of industrial cooperatives (4) prevention of infringement by large industries. However, substantial investigation for problems incurred in medium industries has revealed that unless medium industries improve and raise their technological and managerial skillfulness for themselves all other measures are useless to solve the problems. This realization has induced all of the countries to render extension services on both of technology and management to assist and support their own effort for rationalization. Also in Korea during past 20 years many technical and managerial research institutes have rendered free consultancy services to medium industries by the support of government subsidy. Among them the joint extension services project performed by the Medium Industry Bank and UNDP during 1967 and 1975 might he listed as model case because of its broad and integrated activities and participation of foreign experts. We think many precepts should be :learned from the study of this project. Korean economy is expected to develop rapidly throughout coming'80 in spite of many obstacles, tut there is an apprehension that gap in of every facet between medium and large enterprises might he deepened and enlarged. To prevent the actualization of so-called dual structure of national economy and to promote stabilized medium industries with high added value productivity which are shown in well developed countries, consultancy assistance ana extension services should be strengthened much more than ever. Fortunately in 1978 legislation of "Medium and small industry promotion act" has paved the way for the systematic achivement of consultancy and extension services which shall be integrated by the government overall program. Under new framework thoughtfull accomplishment should be undertaken considering precious precepts obtained from past experience and failure. Special attention should be given to the technical liaison officer scheme, exclusive participation of only professional institutes, strict qualification and training for consultants for the future succsseful implementation.

• 대한예방한의학회지
• /
• 제6권1호
• /
• pp.36-50
• /
• 2002

Health industry, a knowledge based high value-added industry, is being considered as a strategic area for the 21C and many advanced countries are making every endeavors for the promotion of health industry along with information technology, new materials, and mechatronics. Korean health industry, however, has been excluded from the governmental supports as well as bound by strict regulation so far, and there is a significant gap in technology compared with advanced countries. In 21C, technology is the main factor of national competitiveness and that is why the role of R&D institutes are so important in the high level of competition to cope with the technology protection policies of advanced countries. In this article, with Directory of Korean R&D Institutes published by Korea Industry Technology Association, I reviewed the trends of R&D institute of health industry. Main findings of the research can be summarized as follows. The portion of health industry R&D institute is 3.6% of total R&D institute but the amount of R&D investment is over than 5% This means health industry are knowledge based and R&D intensified industry, meanwhile the variations of same industry R&D institutes of health industry is huge in R&D investments and other activities. Regional distributions of health industry institutes show some kind of different patterns in each industry areas. Medical devices and Medical informatics's preference of metropolitan region are distinguished with other industry areas. Many of the institutes are located in same site of it's company rather than operating separate building for R&D specific uses. It is better for transforming ideas to products and close cooperation of research body with product lines, but it is a handicap for networking and communicating with other research institutions too. It takes 18.4yrs for bearing R&D institute on the average. For a long times 'copy products' or 'me too products' policies were easy way to maintain business entities. But recently, it is recognized that research activities are essential component of sustaining it's own business firms. This means technology itself is leading power of corporation itself in the high level of competition.

• 한국전자통신학회논문지
• /
• 제14권6호
• /
• pp.1241-1248
• /
• 2019

본 논문에서는 시각장애인들이 보행 시 장애물이나 위험요소로부터 보다 안전하게 보행 할 수 있도록 보조장치를 구현하였다. 초음파 센서를 통해 전방에 있는 장애물을 감지하여 거리별, 각도별로 부저의 소리의 간격과 진동의 세기를 다르게 울리도록 했으며 그에 따라 보행자가 상황을 인지할 수 있게 설계하였다. 조도 센서의 CdS 저항값을 이용해 설정해놓은 빛의 밝기보다 주변이 어두워 졌을 시 LED가 자동 점등 되어 주변 보행자들이 시각장애인을 쉽게 인식할 수 있게 하였으며, 또한 자이로 센서의 기울기를 이용해 보행자가 보조 장치를 놓쳤을 시 부저를 통하여 보조 장치의 위치를 인식할 수 있게 하였다. 그리고 GPS와 블루투스를 이용하여 시각장애인의 위치 및 상황을 보호자에게 전송하여 안전보행을 확인할 수 있게 구현하였다.

• 한국전기전자재료학회논문지
• /
• 제23권10호
• /
• pp.771-775
• /
• 2010

In this study, piezoelectric and dielectric properties of the $(Na_{0.5}K_{0.5})NbO_3-(1-x)(Bi_{0.5}Na_{0.5})TiO_3-xBaTiO_3$ [NKN-(1-x)BNT-xBT] ceramics were investigated. The lead-free NKN-(1-x)BNT-xBT ceramics were fabricated by a conventional mixed oxide method. The results indicate that the addition of $BaTiO_3$ significantly influences the sintering, microstructure, phase transition and electrical properties of NKN-BNT ceramics. A gradual change in the piezoelectric and dielectric properties was observed with the increase of BT contents. The dielectric constant, piezoelectric constant ($d_{33}$) and electromechanical coupling factor ($k_p$) increased at the morphotropic phase boundary (MPB). The $d_{33}$=184 pC/N, $k_p$=0.38, dielectric constant=1455 with dielectric loss value of less than 1% were obtained for the NKN-0.95BNT-0.05BT ceramics sintered at $1150^{\circ}C$ for 2h. These results demonstrate that the NKN-(1-x)BNT-xBT ceramics is an attractive candidate for lead-free piezoelectric materials.

• 한국전기전자재료학회논문지
• /
• 제27권6호
• /
• pp.394-398
• /
• 2014

We fabricated the electrolyte-dielectric-metal (EDM) sensor on the base of AAO (anodic aluminum oxide) template with variation of the anodizing temperature. When a surface is immersed or created in an aqueous solution, a discontinuity is formed at the interface where such physicochemical variables as electrical potential and electrolyte concentration change significantly from the aqueous phase to another phase. Because of the different chemical potentials between the two phases, charge separation often occurs at the interfacial region [1]. This interfacial region, togeter with the charged surface, is usually known as the electrical double layer (EDL) [2]. The structural and electrochemical properties of AAO sensor were investigated for applications in capacitive pH sensors. To change the thickness of the AAO template, the anodizing temperature was varied from $5^{\circ}C$ to $20^{\circ}C$, the thickness of the AAO template invreased from 300 nm to 477 nm. The pH sensitivity of sensors with the anodizing temperature of $20^{\circ}C$ showed the highest value of 56.4 mV/pH in the pH range of 3 to 11. The EDM sensor with the anodizing temperature of $20^{\circ}C$ exhibited the best long-term stability of 0.037 mV/h.

• 한국멀티미디어학회논문지
• /
• 제15권4호
• /
• pp.472-484
• /
• 2012

보행자의 안전한 보행을 위해 점자형 또는 일반 보도블록이 널리 쓰이고 있다. 불량한 시공 및 유지상태와 장애물은 보행자의 사고를 유발한다. 본 연구는 안전한 보행을 위해 영상에서 가시거리에 위치한 블록의 형태 패턴과 텍스처 특징을 분석하여 보도블록을 검출하는 방법을 제안한다. 보도는 특정모양의 블록이 일정 간격에 반복 배치되어 규칙성을 띄며, 주변 환경 또는 용도에 따라 그 형태는 다양하다. 높은 빈도를 띄는 단일 모양의 다각형을 분석하여 형태 패턴을 추출한다. 일부영역은 이물질 또는 조각난 블록이 원래의 형태를 왜곡시켜 검출되지 않는다. 이 문제는 텍스처 특징벡터 값을 분석하여 해결한다. 앞서 검출된 모든 영역에 대해 분석된 텍스처 특징벡터는 가우시안 분포를 나타내고, 미검출 영역에 대해 분석한 텍스처 특징벡터가 가우시안 분포를 만족하는지 판단한다. 만족된 영역은 보도블록으로 검출한다. 본 실험은 다양한 형태의 보도블록을 인식하였고 95.9%의 정확성을 보였다.

• 벤처창업연구
• /
• 제9권6호
• /
• pp.101-108
• /
• 2014

창업은 일자리 창출과 신성장 동력 발굴의 적극적인 대안으로 인식되어 왔으며 창업투자회사는 이러한 활동에 주요한 역할을 담당할 것으로 기대된다. 그럼에도 불구하고 창업투자회사의 활동과 창업 활동 간의 상관관계에 대한 학계의 실증적 분석은 부족한 실태다. 1998년부터 2014년까지의 시계열 데이터를 분석한 결과 본 연구는 창업투자회사가 벤처 기업 창업을 양적으로 견인한 인과성이 있음을 밝혔다. 또한 벤처 기업의 창업이 청년 실업 문제를 단기간에 해소하기에는 부족하다는 것과 산업별 벤처 기업과 청년 실업 간의 관계가 다르다는 점도 발견했다. 본 연구는 창업투자활동과 벤처 창업 간의 상관성을 시계열적으로 고려하고 인과분석 시도함으로써 창업투자회사 육성에 관련된 연구와 전략 개발 그리고 정책 수립에 시사점을 준다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제39권3호
• /
• pp.243-247
• /
• 2015

본 연구는 상류측에 작은 삼각주를 가진 정방형주의 유체력 저감 특성을 양 항력 측정 실험으로 파악한 것이다. 실험파라메터는 정방형주 한 변의 길이에 대한 삼각주의 폭비(H/B=0.2~0.6) 및 정방형주 전면에서부터 삼각주까지의 거리 (G/B=0~3) 로 했다. 삼각주의 폭비를 고정시킨 경우 정방형주의 항력감소율은 간격비가 증가할수록 증가하다 감소하는 특성을 보였다. 또한 같은 간격비에서는 삼각주의 폭비가 클수록 정방형주의 항력감소율이 증가했으며, 폭비 H/B=0.6, 간격비 G/B=1.5일 때 최대 78.5%의 항력감소율을 보였다. 정방형주의 양력감소율은 수직평판의 폭비 및 간격비에 거의 영향을 받지 않았으며, 양력감소율의 평균치는 52.4% 정도였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권7호
• /
• pp.900-908
• /
• 2014

본 연구는 상류측에 작은 수직평판을 가진 정방형주의 유동장 특성을 양 항력측정 실험과 PIV를 이용한 가시화 실험으로 파악한 것이다. 실험파라메터는 정방형주 한 변의 길이에 대한 수직평판의 폭비(H/B=0.2~0.6) 및 정방형주 전면에서부터 수직평판까지의 거리 (G/B=0~3) 로 했다. 수직평판의 폭비를 고정시킨 경우 정방형주의 항력감소율은 간격비가 증가할수록 증가하다 감소하는 특성을 보였다. 또한 같은 간격비에서는 수직평판의 폭비가 클수록 정방형주의 항력감소율이 컸다. 정방형주의 양력감소율은 수직평판의 폭비 및 간격비에 거의 영향을 받지 않았으며, 양력감소율의 평균치는 48.1% 정도였다. 수직평판을 설치한 경우 정방형주 상류측과 하류측에 정체영역이 나타났다.