• Journal of the Korean Institute of Telematics and Electronics
• /
• v.11 no.6
• /
• pp.1-15
• /
• 1974

In this paper, the SH mode of elastic surface waves which are used for delay lines of elastic surface wave is the cretically analysed. It is shown that the SH mode has very large electromechanical coupling factor and propagates on the surface with very small decaying coefficient into the medium. In the case of P2T-4, the depth cf piezoelectric medium that contains 80% of energy is 190 wavelengths. An elastic surface wave delay line is discussed from the view point of 2-port network. Center frequency is shifted by the ratio of transducer electrode width to gap between transducer ellcerodes when electromechanical coupling factor is large. Tempera _ore coefficients for bulk waves of LiNbO3 and LiTaO3 are also calculated and the minimum temperature coefficient value of delay time is 5.4X 10-6/$^{\circ}C$ ia the case of transverse wave propagating along Z axis on LiTaO3. Experimental data are in good agreement with theoretical values of the temperature coefficients of delay time for elastic surface waves propagating along X axis of 130$^{\circ}$ and 64$^{\circ}$ rotated Y cut planes of the LiNbO3.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.4
• /
• pp.211-215
• /
• 2015

In this paper, we propose a internal antenna for wirless HDMI dongle device using the folded monopole structure. The proposed antenna is for 2.4GHz and 5.8GHz. The antenna optimized for parameters length, gap, width, and radius of semicircular of monopole antenna using the 'F' structure. To confirm the characteristics of the antenna parameters, HFSS from ANSYS Inc. was used for the analysis. We used an FR4 dielectric substrate with a dielectric constant of 4.4. The HDMI dongle size of the proposed antenna is $45{\times}20{\times}1mm$, and the size of the antenna area is $5{\times}20mm$. There is a value of return loss less then -10dB in 2.4GHz and 5.8GHz, band and the maximum antenna gain is -4.13dBi. The result proved the possibility of the practical using 'F' structure that came frin comparing and analyzing the measured and simulated data of the antenna.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.30 no.6
• /
• pp.361-365
• /
• 2017

In this paper, we investigated the effect of Co content on the microstructural and electrical properties of $Ni_{0.79}Mn_{2.21-x}Co_xO_4$ (x=0 to 0.25) specimens. Solid-state reaction was used to prepare the bulk specimens. XRD (X-ray diffraction) patterns showed that all compositions had a cubic spinel phase. As a result of the microstructural properties, FE-SEM(field-emission scanning electron microscopy) analysis showed a dense structure, and the mean grain size increased from $5.24{\mu}m$ to $7.33{\mu}m$ with an increase of Co content from x=0 to 0.25. All specimens exhibited the typical NTC thermistor characteristics as the electrical resistance exponentially decreased with increasing temperature. The resistivity and the B-value of $Ni_{0.79}Mn_{1.96}Co_{0.25}O_4$ were $2959{\Omega}{\cdot}cm$ and 3719, respectively.

• Journal of the Korean Ceramic Society
• /
• v.53 no.4
• /
• pp.400-405
• /
• 2016

Ferric oxide (${\alpha}-Fe_2O_3$, hematite) is an n-type semiconductor; due to its narrow band gap ($E_g=2.1eV$), it is a highly attractive and desirable material for use in solar hydrogenation by water oxidation. However, the actual conversion efficiency achieved with $Fe_2O_3$ is considerably lower than the theoretical values because the considerably short diffusion length (2-4 nm) of holes in $Fe_2O_3$ induces excessive charge recombination and low absorption. This is a significant hurdle that must be overcome in order to obtain high solar-to-hydrogen conversion efficiency. In consideration of this, it is thought that elemental doping, which may make it possible to enhance the charge transfer at the interface, will have a marked effect in terms of improving the photoactivities of ${\alpha}-Fe_2O_3$ photoanodes. Herein, we report on the synthesis by pulsed electrodeposition of ${\alpha}-Fe_2O_3$-based anodes; we also report on the resulting photoelectrochemical (PEC) properties. We attempted Ti-doping to enhance the PEC properties of ${\alpha}-Fe_2O_3$ anodes. It is revealed that the photocurrent density of a bare ${\alpha}-Fe_2O_3$ anode can be dramatically changed by controlling the condition of the electrodeposition and the concentration of $TiCl_3$. Under optimum conditions, a modified ${\alpha}-Fe_2O_3$ anode exhibits a maximum photocurrent density of $0.4mA/cm^2$ at 1.23 V vs. reversible hydrogen electrode (RHE) under 1.5 G simulated sunlight illumination; this photocurrent density value is about 3 times greater than that of unmodified ${\alpha}-Fe_2O_3$ anodes.

• Journal of Society of Preventive Korean Medicine
• /
• v.19 no.3
• /
• pp.77-90
• /
• 2015

Objective : The purpose of this study is to discuss the role and ways to improve the position and rights of Korean Medicine Doctors (KMDs) working at long-term care hospitals (LTCHs) through survey analysis. Method : (1) The legal and institutional position of KMDs is studied using current law and related papers. (2) The online survey was conducted through KMD community websites, targeted at KMDs working at LTCHs. Results : (1) Whereas there is perceived added benefit for the eight specializations for a specialist of Western medicine at LTCHs, in the case of a specialist of Korean Medicine, their value is not institutionally recognized at all. (2) A Western inpatient's medical fee is more than a Korean inpatient's medical fee, and the individual fee for the same medical treatment is also higher in Western hospitalization. So, Korean medical hospitalization actually cannot be made. Because of that, Korean Medicine Doctors find it difficult to be primary care physicians. (3) Musculoskeletal diseases and the aftereffects of cerebrovascular diseases were the most common chief complaints addressed in Korean medical consultations. Conclusion : This study shows that KMDs working at LTCHs have suffered many kinds of inequality. That is because of the limited medical scope of the current medical system and real constraints from the gap in Korean-Western medical fees by the National Health Insurance Corporation. Therefore, it is necessary to eliminate these variations along with revising the statute with continuous research.

• Archives of design research
• /
• v.13
• /
• pp.235-255
• /
• 1996

The world-view of a period or a society refers to the way it conceives of the order and governing principles of the universe. The ad and outcome of the crealive process of a designer reflect his or her world-view or value system. Contemporary students of design seem to find the traditional approach to art based upon the Euclidean logic rather redudive and confining and are trying to develop a new way of thinking and methodology, a new frame of reference. In this study, I am offering the chaos- and fractal theory, concepts drawn from science, as a new anchoring point for design. This approach makes use of the concept of chaos as the basis of a new, open system that enables a designer to find and generate numerous visual possibilities immanent in chaos. Likewise. fractal geometry is offering new concepts and vocabularies for the study of physical universe and design thinking, as well as bridging the gap between science and art. The number of structural possibilities fractal theory generates for environmental design seems to be virtually unlimiLl'd. In fine. this study places a great emphasis on the new approaches t() the environment we inhabit. which I hope will contribute to generating a greater number of creative possibililil:s for environmental design.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.8
• /
• pp.1248-1256
• /
• 2008

In this paper, basic characteristics of transmission line employing PPGM (periodically perforated ground metal) were investigated using theoretical and experimental analysis.According to the results, unlike the conventional PBG (photonic band gap) structures, the characteristic impedance of the transmission line employing PPGM structure showed a real value, which exhibited a very small dependency on frequency. The transmission line employing PPGM structure showed a loss (per quarter wave length) higher by $0.1{\sim}0.2\;dB$ than the conventional microstrip line. According to the investigation of the dependency of RF characteristic on ground condition, the RF characteristic of the transmission line employing PPGM structure was hardly affected by the ground condition in the frequency lower than Ku band, but fairly affected in the frequency higher than Ku band, which indicated that coplanar waveguide employing PPGM structure was optimal for RF characteristic and reduction of size. Considering above results, impedance transformer was developed using coplanar waveguide with PPGM structure for the first time, and good RF characteristics were observed from the impedance transformer. In case that {\lambda}/4$ impedance transformer with a center frequency of 9 GHz was fabricated for a impedance transformation from 20 to10 {\Omega}$, the line width and length were 20 and $500\;{\mu}m$, respectively, and its size was only 0.64 % of the impedance transformer fabricated with conventional microstrip lines. Above results indicate that the transmission line employing PPGM is a promising candidate for a development of matching and passive elements on MMIC.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.1
• /
• pp.31-42
• /
• 2007

The purpose of this study was to compare the stress distribution according to the splinting condition and non-splinting conditions on the finite element models of the two units implant prostheses. The finite element model was designed with the parallel placement of two fixtures ($4.0mm{\times}11.5mm$) on the mandibular 1st and 2nd molars. A cemented abutment and gold screw were used for superstructures. A FEA models assumed a state of optimal osseointegration, as the bone quality, inner cancellous bone and outer 2 mm compact bone was designed. This concluded that the cortical and trabecular bone were assumed to be perfectly bonded to the implant. Splinting condition had 2 mm contact surface and non-splinting condition had $8{\mu}m$ gap between two implant prosthesis. Two group (Splinting and non-splinting) were loaded with 200 N magnitude in vertical axis direction and were divided with subdivision group. Subdivision group was composed of three loading point; Center of central fossa, the 2 mm and 4 mm buccal offset point from the central fossa. Von Mises stress value were recorded and compared in the fixture-bone interface and bucco-lingual sections. The results were as follows; 1. In the vertical loading condition of central fossa, splinting condition had shown a different von Mises stress pattern compared to the non-splinting condition, while the maximum von Mises stress was similar. 2. Stresses around abutment screw were more concentrated in the splinting condition than the non-splinting condition. As the distance from central fossa increased, the stress concentration increased around abutment screw. 3. The magnitude of the stress in the cortical bone, fixture, abutment and gold screw were greater with the 4 mm buccal offset loading of the vertical axis than with the central loading.

• Journal of the Korean Chemical Society
• /
• v.43 no.1
• /
• pp.85-91
• /
• 1999

The second order rate constants for the hydrolysis of substituted phenyl N,N-diethyl-P-benzylphosphonamidates (2,4-$(NO_2)_2$, 4-$NO_2$, 4-CN, 4-Cl, 4-H)in 20% dioxane-water (v/v) have been determined by UV/Vis spectrophotometric method at various temperatures. The activation parameters (Ea, ${\Delta}H^{\neq}$,${\Delta}S^{\neq}$) were calculated from the rate constants and the reaction constant ($\rho$) was also estimated by Hammett equation. The activation entropies of the title reactions show considerably negative values, this result is not consistent with a dissociative mechanism (EA) in which a positive or a slightly negative value of the entropy of activation should be expected. Further, kinetic evidence for an associative mechanism (AE) was obtained from the linear free energy relationship. By the results of kinetic study for the alkaline hydrolysis of substituted phenyl N,N-diethyl-P-benzylphosphonamidates, it may be concluded that these reactions proceed through an associative mechanism.

• Journal of the Korean Society of Industry Convergence
• /
• v.6 no.1
• /
• pp.81-86
• /
• 2003

For the simultaneous removal of $SO_2$/NOx from an iron-ore sintering plant, industrial plasma experiments have been conducted with a flue gas flow rate of $5,000Nm^3/hr$. The maximum 40kW power using the magnetic pulse compression (MPC) system generates a peak value of 100-150kV pulse voltage with its risetime of 200nsec and full width at half maximum (FWHM) of 500nsec, and with a frequency <300Hz. The plasma reactor module adopts a wire-plate structure with a gap of 200-400mm ID between plates. Initial concentrations of $SO_2$ and NOx were around 100-150ppm, respectively in the presence of 15% $O_2$ and <10% $H_2O$. Various reaction parameters such as specific energy ($Whr/Nm^3$), $NH_3$ injection with corona discharge, flow rate and injection of hydrocarbons were investigated for $SO_2$/NOx removal characteristics. About 90/65% of $SO_2$/NOx were simultaneously removed with a specific energy of $3.0Whr/Nm^3$ when both $NH_3$ and hydrocarbons were injected. Practical implications that the pilot-scale plasma results provide are further discussed.