• The Journal of the Korea institute of electronic communication sciences
• /
• v.18 no.6
• /
• pp.1067-1072
• /
• 2023

We prepared AZO (Al₂O₃ : 3 wt %) thin films according to the substrate temperature using the pulsed laser deposition method and the structural, electrical, and optical properties of the thin films were investigated. The AZO thin film deposited at 400℃ showed the best (002) orientation and the FWHM was 0.38°. As a result of the investigation of electrical properties, it was confirmed that the carrier concentration and mobility increased and the resistivity decreased as the substrate temperature increased. The average transmittance in the visible light region showed a high value of 85% or more regardless of the substrate temperature. The Burstein-Moss effect, in which the carrier concentration would increase with increasing substrate temperature thereby widening the energy band gap, was also observed. The resistivity and the figure of merit of the AZO thin film deposited at a substrate temperature of 400℃ were 6.77 × 10^-4 Ω·cm and 1.02 × 10⁴ Ω^-1·cm^-1 respectively, showing the best value.

• Science of Emotion and Sensibility
• /
• v.11 no.2
• /
• pp.257-270
• /
• 2008

Three experiments were carried out in order to determine whether users have longer using time, better recall of product information, and flow in an aesthetically appealing product (media player) in products offering good usability. For the experiment, fourteen emotional words were employed which were made up of 8 aesthetic and 6 usability words. In a preliminary experiment, the subjects freely used three media players and selected emotional words by a 7-point likert scale to distinguish a group of similar usability value and another group contrary to the other in aesthetic and usability value. (N=18) In the main experiment, it was hypothesized that users use more and have more flow and recalled information in the case of the aesthetically appealing product. Therefore, in the main experiment, we measured how much time subjects spent using the product and asked them to make an assumption regarding the time spent by the group that has the same usability value. We then examined the time they spent and the gap between the actual and estimated time. We also calculated the amount of menu information recalled via a questionnaire. In the last experiment, we selected the group of products contrary to each other in aesthetic and usability value and assessed the differences in using time, recall of product information, and flow. (N=18) The empirical results provide evidence that aesthetically appealing products are associated with greater flow and recall of product information than other products, thus supporting the hypothesis. In addition, it was found that there is a positive correlation between the aesthetically appealing product and flow index as well as with recalled information.

• Korean Journal of Poultry Science
• /
• v.37 no.3
• /
• pp.265-273
• /
• 2010

The objective of this study was to investigate the effects of addition of green tea extracts on physicochemical properties and shelf-life of seasoned chicken with soy sauce during cold storage. Treatments (C, T1 and T2) containing various levels (0, 1 and 2%, respectively) of green tea extracts were manufactured, and we investigated pH, meat color ($L^*,a^*,b^*$), volatile basic nitrogen (VBN), thiobarbituric acid reactive substances (TBARS), total plate counts, fatty acid composition and sensory scores during cold storage for 16 days. T1 and T2 have more dark color than control during storage time. VBN, TBARS and total plate count of control were significantly higher than those of T1 and T2 at the latter storage time (p<0.05). Also, VBN, TBARS and total plate count of all treatments was increased with storage time. Linoleic acid was the highest value in control which had the highest value of TBARS in day 16 (p<0.05). Aroma value of control was significantly higher in storage time except day 16 than those of T1 and T2 (p<0.05). Acceptability value of control was significantly higher than those of T1 and T2 in day 4, 8 and 12 (p<0.05).

• The Korean Journal of Applied Statistics
• /
• v.24 no.2
• /
• pp.411-424
• /
• 2011

The studies of congruence in organizational research have explored the concepts such as person-job fit person-organization fit, or person-environment fit. The relevant studies dealt with the fit level as an important influencing factor on the performance. In particular, researchers have agreed that employees can be motivated by the high level fit of person-organization. However, few research developing an alternative methodological approach has been done. For the purpose mentioned above the statistics like D, |D| or $D^2$ and the Q values such as Q(the correlation between two sets of interval measures) or $Q_r$(the correlation between two rankings) have been conventionally adopted in spite of numerous methodological problems. In general, these traditional indices such as difference scores, or Q values, are nondirectional and add an extra weight to differences of lager magnitude. Therefore, Edwards (1993) introduced the polynomial regression and the response surface analysis to overcome flaws with conventional approaches. However, the method-ological approaches did not reflect the profile characteristics of person-organizational value fit and wouldn't be a proper solution for the fit level of person-organization value maximizing performance. Hence, this paper investigates alternative methodological approaches, the multivariate polynomial regression and the multiple response surface analysis, to avoid the problems issued from conventional ways.

• Proceedings of the KIEE Conference
• /
• 1999.07d
• /
• pp.1771-1773
• /
• 1999

Ferroelectric PZT(10/90)/(90/10)heterolayered thin films were fabricated by the alkoxide-based Sol-Gel method Electric and dielectric properties of PZT(10/90)/(90/10) heterolayered thin films have been investigated, focusing on the effect of PZT/PZT and PZT/electrode interface on the heterolayered films. Dielectric constant increased with increasing the number of coatings. Increasing the number of coatings, remanent polarization and coercive field were decreased and the values of the PZT-6 heterolayered thin films deposited on Pt/Ti/$SiO_2$/Si were $7.18{\mu}C/cm$, $68.5kV/cm^2$, respectively. Leakage current, densities were increased with increasing the number of coatings, and the value of the PZT-4 film deposited on the Pt/Ti/$SiO_2$/Si substrate was about $7{\times}10^{-8}A/cm^2$ at 0.05MV/cm.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.3
• /
• pp.514-520
• /
• 1997

A single component of $Sb_2O_3$ glass has been obtained by a rapid quenching method in vacuum. The linear refractive indices were measured as a function of wavelength from 500 nm to 1060 nm. The refractive index at $n_{3{\omega}}$/(633 nm) was as high as 2.00. The optical band gap was estimated as 3.38 eV from the optical absorption spectrum. The third-order nonlinear optical intensity was determined by the third harmonic generation (THG) method. The $\chi^{(3)}$value was as high as $5.68{\times}10^{-13}$esu, about 20 times larger than that of $SiO_2$ glass.

• International Journal of Railway
• /
• v.2 no.2
• /
• pp.93-97
• /
• 2009

The experiments for aerodynamic characteristics of railway acoustic screen are performed using 1/61 scaled-down moving model rig facility which employs an axis symmetry and one wire guidance method. The launching mechanism is an air-gun type. The train model for the experiment is the high speed train (Korea Train Express: KTX) and the tested speed is about 300 km/h. The tested train length is 61 em which is corresponding to two units of KTX train. The cross sectional area and weight of train model are 0.00264 $m^2$ and 287 g, respectively. The Reynolds number based on the model train length is $1.2{\times}10^7$. The strength of pressure wave is measured using piezo typed pressure sensor. The measured pick value of pressure was as high as 365 Pa in the shortest gap between the acoustic screen and model train. The measured pressure is well compared with the field test data of mc 779-1 [2] values. However, the experimental data were slightly lower than the mc 779-1 values. The results show the model test can be used as a substitute for the field test.

• Journal of Construction Engineering and Project Management
• /
• v.5 no.3
• /
• pp.1-9
• /
• 2015

Project cost is an important concern in any construction project. Although there has been a lot of studies on factors affecting the cost of construction projects, there seems no consensus as what cost factors have direct influence on the cost of civil engineering projects. This study therefore aims to bridge the current knowledge gap by examining quantity surveyors' perception of the factor structure among nineteen costing attributes identified based on literature review. Questionnaire was used to elicit responses from quantity surveyors working in the Hong Kong construction industry. Principal component analysis is conducted to extract the factor structure of the cost attributes and the attributes are grouped into three factor components, namely the contract management factor, the project management factor and the monetary value factor. Understanding these cost impact factors could be crucial in managing civil engineering projects, since it allows the project stakeholders and quantity surveyors to take precautionary steps to identify the cost management problems and areas for improvement and could even help to avoid cost deviations in engineering projects.

• Transactions on Electrical and Electronic Materials
• /
• v.17 no.3
• /
• pp.163-167
• /
• 2016

Inverter surge resistant enameled wire was prepared with an organic/inorganic hybrid nanocomposite, and the effect of ambient temperature on the insulation lifetime of the enameled wire in the form of twisted pair was studied by a withstanding voltage tester. The organic polymer was Polyesterimide-polyamideimide (EI/AI) and the inorganic material was a Nano-sized silica (average particle size : 15 nm). The enamel thickness was 50 μm and the ambient temperature was 100, 150, 200, and 250, respectively. Transmission electron microscopy (TEM) observation showed that Nano-sized Silica were evenly dispersed in EI/AI. There were many air gaps in a twisted pair, therefore, when voltage was applied to the twisted pair, enamel erosion took place in the air gap area because of partial discharge accordi, ng to Paschen’s law. As ambient temperature increased, insulation lifetime decreased according to Arrhenius relationship, which was explained by the increasing mobility of polymer chains in EI or AI. And insulation breakdown voltage value at 10 kHz was 1,864.5 sec (31.1 min), which is 1.9 times higher than at 20 kHz, 981.6 sec (16.4 min).

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.12
• /
• pp.2246-2253
• /
• 2011

This paper presents the error correction method of magnetic position sensor using recursive least square method (RLSM) with forgetting factor. Magnetic position sensor is proposed for linear position detection of the linear motor which has tooth shape stator, consists of permanent magnet, iron core and linear hall sensor, and generates sine and cosine waveforms according to the movement of the mover of the linear motor. From the output of magnetic position sensor, the position of the linear motor can be detected using arc-tan function. But the variation of the air gap between magnetic position sensor and the stator and the error in manufacturing process can cause the variation in offset, phase and amplitude of the generated waveforms when the linear motor moves. These variations in sine and cosine waveforms are changed according to the current linear motor position, and it is very difficult to compensate the errors using constant value. In this paper, the generated sine and cosine waveforms from the magnetic position sensor are compensated on-line using the RLSM with forgetting factor. And the speed observer is introduced to reduce the effect of uncompensated harmonic component. The approaches are verified by some simulations and experiments.