• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.37 no.2
• /
• pp.77-84
• /
• 2004

The powder and liquid products of seasoned and smoked skipjack tuna (Euthynus pelamis) was manufactured by using small skipjack tuna (1-2 kg, 20-30 cm) captured in the East Sea, Korea. Smoking was done three times at $80^{\circ}C$ for 8 hrs to decrease the moisture content below $15\%.$ The seasoned and smoked skipjack tuna powder with liquid smoke showed the lower pH than the control. The pH, VBN, amino nitrogen content, and TBA value were increased slowly as storage period was increased at room temperature. Liquid smoke decreased the production of animo nitrogen and VBN. Vacuum packaging was efficient for inhibiting the deterioration and the microbial growth of the seasoned and smoked skipjack tuna powder product.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.206.2-206.2
• /
• 2014

Recently, particle induced X-ray emission (PIXE) analysis system was installed at the 2MV ion acceleration system in Korea institute science and technology (KIST). This installation is for complement to low atomic resolution of heavy atoms at Rutherford backscattering spectrometry (RBS) system. For quantitative analysis, a mass calibration of the PIXE set-up has been done with thin film standards and. The GUPIX software package has been used to process the PIXE spectra and the results are compared with the values from RBS system. Therefore, the instrumental constant H (solid angle and correction factor) is determined relying completely on the GUPIX data base (cross-sections, fluorescence and Coster-Kronig probabilities, stopping powers and attenuation coefficients) for a large set of elements. These H values can be used in future analysis.

• Proceedings of the KIEE Conference
• /
• 2002.11d
• /
• pp.39-42
• /
• 2002

In this study, the computational heat transfer of the high-voltage vacuum circuit breaker was investigated. Higher normal current-ratings and stabilized thermal characteristics become more important in existing circuit breakers in order to satisfy market needs. Increases in current-ratings have an even greater effect on the Joule heating in the main circuit of the breakers. The thermal design must account for this increase in heat produced for the breaker to meet various temperature-rise limits set by industry standards. We are studying to enhance the normal current-ratings without major frame change of our present production models. As the method used in this research, we performed the computational analysis using the commercial Package, ICEPAK. We could get optimized thermal design suitable for 25% upgraded normal current-ratings through parametric study.

• Journal of the Korean Vacuum Society
• /
• v.12 no.S1
• /
• pp.60-62
• /
• 2003

In this study we report the results of ab initio first-principles calculations to investigate the possibility of metamagnetic behavior in Fe$_3$Al alloy. We used the WIEN2k package of full-potential linearized-augmented- plane-wave method within the local-spin-density approximation to the density-functional theory. The exchange-correlation functional is the generalized-gradient approximation of Perdew-Burke-Ernzerhof. The theoretical lattice constant, which is about 0.5% smaller than the experimental one, is obtained by minimizing the total energy. If the volume decreases about 9 % from the equilibrium, the total magnetic moment decreases abruptly from 4.6 $\mu_{B}$/f.u. to 4.0 $\mu_{B}$/f.u. Since this change is considerably large (∼14%), it is possible to measure by a simple high-pressure experiment at about 180 kbar.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.4 no.1
• /
• pp.33-40
• /
• 1997

The microbial growth of fresh, vacuum packaged, cook-in-bag uncured beef patties was determined in two film structures, a commercial (PE/EVOH), and super barrier ($SiO_2$ coated polyester) material. Packaged samples were cooked to internal temperature of 71 and $82^{\circ}C$ for 30 minutes, and stored in temperature abused ($23{\pm}2^{\circ}C$) and refrigerated storage ($4-6^{\circ}C$). Barrier properties had a significant effect (p<0.001) on aerobic and mesophilic growth in the abused condition. Cooking temperatures had a statistically significant effect (p<0.05) on aerobic growth in the refrigerated condition. The growth of anaerobes and psychrophiles were not significantly effected by either variables. Storage times had the most significant effect (p<0.001) for all groups of microorganisms. The physical properties of the commercial film (strength, thickness, and shrinkage) were changed after exposure to thermal treatment, while the super barrier package had actually no change.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.3
• /
• pp.428-432
• /
• 2009

40 goat kid ribcages were held for 7 days in storage conditions ($4^{\circ}C$) and used to determine the effects of three different packaging methods (atmospheric air, vacuum and modified atmosphere package (MAP) 10:70:20 mixture of $N_2:O_2:CO_2$) on meat quality of the chops. L* was affected by the packaging method being lighter than MAP chops. The coordinate a* significantly increased during storage time. For MAP-packed chops and those kept in atmospheric air, b* increased markedly during storage time whereas it remained unaffected throughout storage when in vacuum packages. Final pH values ranged from 5.6 to 5.8 and no effects were found for either storage time or packaging method. WHC means were lowest for the three packaging methods on day 7 of storage and highest on day 1. Storage time increased water loss in vacuum treatments. Trained panel colour acceptability was lower at 3, 5 and 7 days than on day 1 of storage for atmospheric air treatment and vacuum packaging, while for the MAP treatment average values on days 5 and 7 were lower than those observed on days 1 or 3. Trained panel odour was lower for atmospheric air and vacuum packages at 3, 5, and 7 days storage than at 1 day, while no differences were found in trained panel odour acceptability for MAP packages. With reference to consumers, the MAP proposed in the present study is the chosen method for storing goat meat, rather than vacuum or atmospheric air packaging.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.4
• /
• pp.124-130
• /
• 2023

Recently, fan out wafer level packaging, which enables high integration, miniaturization, and low cost, is being rapidly applied in the semiconductor industry. In particular, FOWLP is attracting attention in the mobile and Internet of Things fields, and is recognized as a core technology that will lead to technological advancements such as 5G, self-driving cars, and artificial intelligence in the future. However, as chip density and package size within the package increase, FOWLP warpage is emerging as a major problem. These problems have a direct impact on the reliability and electrical performance of semiconductor products, and in particular, cause defects such as vacuum leakage in the manufacturing process or lack of focus in the photolithography process, so technical demands for solving them are increasing. In this paper, warpage simulation according to the thickness of FOWLP material was performed using finite element analysis. The thickness range was based on the history of similar packages, and as a factor causing warpage, the curing temperature of the materials undergoing the curing process was applied and the difference in deformation due to the difference in thermal expansion coefficient between materials was used. At this time, the stacking order was reflected to reproduce warpage behavior similar to reality. After performing finite element analysis, the influence of each variable on causing warpage was defined, and based on this, it was confirmed that warpage was controlled as intended through design modifications.

• Food Science of Animal Resources
• /
• v.18 no.2
• /
• pp.125-131
• /
• 1998

This study were carried out for investigation of microbiological characteristics, and establishment of shelf-life of Korean vacuum packaged chilled pork hams for export. The samples were stored at 0$\pm$1$^{\circ}C$ (A and B companies) and 2$\times$1$^{\circ}C$ (C and D companies). In the analysis of microorganisms, the numbers of total plate counts were 3.72$\times$103~1.15$\times$104CFU / $\textrm{cm}^2$ at initial time. After 30 days, total plate counts were over 1$\times$106CFU / $\textrm{cm}^2$ in samples. Anaerobic counts were over 1$\times$106CFU / $\textrm{cm}^2$ in samples excluded one of A company after 30 days. Using regression equations, the estimation of shelf life were made : 32~37 days in storing at $0^{\circ}C$ and 27 days at 2$^{\circ}C$. In this case, the determination coefficients were 0.8624~0.9515 and 0.8236~0.8565, respectively.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.10
• /
• pp.849-856
• /
• 2012

Chip on board type white light emitting diode on metal core printed circuit board with high thixotropy silicone is fabricated by vacuum printing encapsulation system. Encapsulant is chosen by taking into account experimental results from differential scanning calorimeter, shearing strength, and optical transmittance. We have observed that radiant flux and package efficacy are increased from 336 mW to 450 mW and from 11.9 lm/W to 36.2 lm/W as single dome diameter is varied from 2.2 mm to 2.8 mm, respectively. Double encapsulation structure with 2.8 mm of dome diameter shows further significant enhancement of radiant flux and package efficacy to 667 mW and 52.4 lm/W, which are 417 mW and 34.8 lm/W at single encapsulation structure, respectively.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.554-559
• /
• 2013

In this study, we have investigated potential energy of ${\beta}$-D-glucopyranose in vacuum and implicit water condition. By Comparing two conditions we find that how solvation energy influence ${\beta}$-D-glucopyranose structure. We use AMBER package program and GLYCAM_06 force field. Solvation model was used for the generalized Born model with Hawkins, Cramer, Truhlar has been proposed. We conclude that difference of contour map of two conditions is caused by solvation effect by reducing hydrogen bonding interaction.