• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.377-377
• /
• 2012

반도체 물질로서 Zinc oxide (ZnO) nanorod (NR)는 Hydrothermal growth method로 제작 시 고가의 장비가 필요치 않기에 저비용 대면적 박막을 제작하는데 적합하지만 NR들의 array 조절과 각각의 rod와 전극 간의 연결에서 어려움을 가지고 있다. 최근 연구에서는 이러한 NR array 형상 조절과 소자의 성능 향상을 위하여 tilted sputtering method를 이용해 seed layer를 lateral 하게 형성하여 성장시켜 표면적을 극대화함으로서 응용되는 센서의 성능을 향상시키는 연구가 진행되고 있다. 본 연구에서는 이렇게 향상된 수평구조의 ZnO NR과 다양한 전극 금속 간의 schottky barrier의 높이 차이에 따라 sensitivity와 response time의 차이를 측정하였다. NR들을 전계방출형 전자현미경과 XRD로 분석 NR의 lateral structure 및 결정성을 확인하였다. 그리고 이렇게 형성한 NR을 소자화하여 Au, Ag, Al을 전극 금속물질로 사용한 경우에 대하여 sensing performance와 전극 금속의 schottky barrier의 상관관계를 확인하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.257-257
• /
• 2012

Fault detection was carried out in a etcher of capacitive coupled plasma with OES (Optical Emission Spectroscopy) and impedance by VI probe that are widely used for process control and monitoring at semiconductor industry. The experiment was operated at conventional Ar and Fluorocarbon plasma with variable change such as pressure and addition of N2 and O2 to assume atmospheric leak, RF power and pressure that are highly possible to impact wafer yield during wafer process, in order to observe OES and VI Probe signals. The sensitivity change on OES and Impedance by VI probe was analyzed by statistical method including PCA to determine healthy of process. The main goal of this study is to find feasibility and limitation of OES and Impedances for fault detection by shift of plasma characteristics and to enhance capability of fault detection using PCA.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.354.1-354.1
• /
• 2016

Nanoporous gold (NPG) is a very promising material in various fields such as sensor, actuator, and catalysis because of its high surface to volume ratio and conducting nature. In this study, we fabricated a NPG based amperometric sensor on a glass substrate by means of co-sputtering of Au and Si. During the sputtering process, we found the optimum conditions for heat treatment to reduce the residual stress and to improve adhesion between NPG films and the glass substrate. Subsequently, Si was selectively etched from Au-Si alloy by KOH solution, which forms nanoporous structures. Scanning electron microscopy (SEM) and auger electron spectroscopy (AES) were used to estimate the structure of NPG films and their composition. By employing appropriate heat treatments, we could make very stable NPG films. We tested the performance of NPG sensor with aniline molecules, which shows high sensitivity for sensing low concentration of aniline.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.273.1-273.1
• /
• 2016

Graphene exhibits a number of unique properties that make it an intriguing candidate for use in sensor. Here, we report graphene-based gas sensor. Graphene was grown using CVD. Then, the sensor was made using standard lithography techniques. The sensor conductance increased upon exposure to NH3, whereas it decreased upon NO2, suggesting that NH3 and NO2 might be discriminated using the graphene-based sensor. To improve the sensitivity, graphene was treated with hydrogen plasma. After hydrogen treatment, the electrical properties of graphene changed from ambipolar to p-type semiconductors. In addition, the sensor performance was improved probably due to an opening of bandgap.

• 센서학회지
• /
• 제5권2호
• /
• pp.9-14
• /
• 1996

N 형의 실리콘 기판위에 수평형의 전계 방출 배열 구조를 갖는 진공 자기 센서를 제작하고 그의 자기적 특성을 측정하였다. 소자는 수평으로 구성된 팁 사이의 간격이 $10\;{\mu}m$인 100 개의 전계 방출 팁, 게이트 그리고 분리된 양극 구조로 이루어져 있다. 에미터 전극으로부터의 전자 방출 특성은 Fowler-Nordheim 턴널링 이론을 따른다. 제작된 센서는 좋은 직선 특성과 825 %/T 의 높은 감도를 보여주었다.

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.100-105
• /
• 1998

This paper describes the preparation of Pt-and $TiO_2$-doped $Nb_2O_5$ thin film by Ion-Beam-Enhanced Deposition. Platinum and titanium doping, and Nb2O5 deposition were carried out in situ. The dependence of oxygen sensing properties on the amounts of Pt and Ti dopant in the $Nb_2O_5$ film was investigated. There were the highist sensitivity, the lowest temperature coefficient and the shortest responce time at doping of 5 mol% $TiO_2$ and 0.3 mol%Pt

• 한국진공학회지
• /
• 제7권s1호
• /
• pp.156-158
• /
• 1998

This paper describes the preparation of boron-doped polycrystalline diamond thin film whose electrical resitivity is lower than $10^{-1}\Omega$cm. The 1$\times$1$\textrm{mm}^2$ microelectrodes, its conducting line with 0.2mm wide and 0.5$\times$0.5$\textrm{mm}^2$ pads was patterned by reactive ion beam etching. A glucose microsensor based on diamond film microelectrode and pyramidal containment produced on silicon by anisotropic etching was developed. Its advantages are high sensitivity and high stability.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.411.2-411.2
• /
• 2014

The design of DNA nanostructures is of fundamental importance, the intrinsic value of DNA as a building-block material lies in its ability to organize other bio-molecules with nanometer-scale spacing. Here, we report the fabrication of DNA scaffolds with nano-pores (<10 nm size) that formed easily without the use of additives (i.e., avidin, biotin, polyamine, or inorganic materials) into large-scale structures by assembling DNA molecules at near room temperature ($30^{\circ}C$) and low pH (~5.5). Protein immobilization results also confirmed that a fibronectin (FN) proteins/large scale DNA scaffolds/aminopropylytriethoxysilane (APS)/SiO2/Si substrate with high sensitivity formed in a well-defined manner. The DNA scaffolds can be applied for use with DNA-based biochips, biophysics, and cell biology.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.361-365
• /
• 2002

In this paper, a magnetic suspension system with inductive sensors fur a high vacuum turbomolecular pump(TMP) is discussed. The performance of designed inductive position sensor is evaluated by static and dynamic test, and the test results show sensitivity of about 6,000 V/m and dynamic bandwidth of 750 ㎐. The protype of magnetic suspension system is designed and constructed with 5-axis magnetic bearing, inductive sensor and BLDC internal motor. With DSP based digital PID control system, the prototype is examined its high damping ratio and stable operation up to 20,000 rpm of rotation.

• 한국진공학회지
• /
• 제7권1호
• /
• pp.72-76
• /
• 1998

본 연구에서는 방전내에서 활성화된 라디칼의 반응을 촉진시키는 플라즈마중합을 통하여 기능성 유기박막을 합성하기 위해 새로운 형태의 유동가스형 반응장치를 개발하였 다. 중합을 위해서 스티렌 모노머를 사용하였으며 분자구조와 분자량 분포에 대한 분석을 행하였다. 제작된 플라즈마중합막은 우수한 성능의 전자빔 레지스트로서 평가되었다. 새로운 플라즈마 반응장치를 이용하여 제작된 박막의 감도는 습식공정에 의해 제작된 레지스트의 감도에 비해서 향상되었으며 깨끗한 패턴이 성공적으로 제작되었다.