• 대한치과기공학회지
• /
• 제44권3호
• /
• pp.76-80
• /
• 2022

Purpose: The purpose of this study is to analyze the depth according to curing using photocurable resin for dental three-dimensional printing. Methods: A stainless mold with a height of 4 mm was prepared. Ultraviolet (UV) polymerization resin was injected into the mold. Photocuring was then performed for 5 minutes using a photopolymerizer, and the height was measured using a digital measuring instrument (first group). Second, light polymerization was also performed outside the mold for 5 minutes, and the height was measured using a digital measuring instrument. Third, light polymerization was further performed for 5 minutes, and the height was measured using a digital measuring instrument. Statistical analysis was performed with the Kruskal-Wallis test, which is a nonparametric test (α=0.05). Results: The third group had the largest measurement length, whereas the first group had the smallest. However, the difference between groups was not statistically significant (p>0.05). The color of the first group was different from that of the second and third groups. Conclusion: All of the 4-mm-thick photocured specimens had a curing reaction, but the part that was not directly irradiated with UV did not show its original color.

• 한국전기전자재료학회논문지
• /
• 제17권1호
• /
• pp.59-64
• /
• 2004

We have fabricated the polymer dispersed liquid crystal (PDLC) cell where a control of phase separation is very important. The factors to influence the phase separation are mixing ratio of LC and polymer, curing temperature and UV intensity. In this paper, we inspected the change of a phase separation as a function of curing temperature for the mixture of E7 and. NOA65 with different ratios. When the LC concentration is less than polymer such as LC:NOA65 = 40:60wt％, the PDLC cell is influenced strongly by the curing temperature. However, when the LC concentration is much less than polymer such as LC:NOA65 = 80:20wt％, it is influenced slightly by the curing temperature. The reason is because the mixture shows upper critical solution temperature behavior and therefore it is important to know the behavior of phase separation as a function of curing temperature of the mixture.

• 접착 및 계면
• /
• 제14권4호
• /
• pp.167-174
• /
• 2013

본 연구에서는 ink binder용으로 isophorone diisocyanate (IPDI)/polyether polyol/2-hydroxyethyl acrylate (HEA)계 UV 경화형 우레탄 아크릴레이트를 중합하였다. HEA/PETA 혼합 비율을 달리한 조성물의 UV 조사 시간에 따른 광경화거동을 FT-IR spectrophotometer, probe tack tester 및 Photo-DSC로 확인하였다. UV 조사 시간이 증가함에 따라 전환률 및 gel content는 증가하였으며 probe tack은 감소하였다. 반응성 희석제로 사용한 PETA 함량이 증가함에 따라 저장탄성률, 인장강도 및 초기분해 온도가 증가하였다. HEA/PETA 비율이 30/70인 경우 UV 경화 후 PMMA sheet에 대한 부착특성이 가장 우수하였다.

• 접착 및 계면
• /
• 제15권1호
• /
• pp.22-30
• /
• 2014

본 연구는 자가광개시형 아크릴레이트를 Michael addition 반응을 이용하여 합성하고 자유라디칼, 양이온 및 하이브리드 시스템을 통해 배합-경화-물성 상관관계를 유도하여 이들의 경화물성, 표면 물성을 Photo-DSC, 진자경도, 연필경도 및 내오염성 측정을 이용하여 평가하였다. 그 결과, 자유라디칼 반응형 모노머 첨가를 통해 경화 특성의 향상을 유도할 수 있었으나, 일정량 이상의 모노머 첨가 시 반응성 저하로 인해 경화성이 오히려 저하되었으며, 이는 자유라디칼 반응형 모노머에 의한 이동성의 향상이 SPIA의 경화 향상에는 한계가 있음을 확인하였다. 자유 라디칼 광개시제에 의한 자유 라디칼의 생성과 자가광개시 반응에 의한 자유라디칼이 동시에 연속적으로 반응에 참여되어 우수한 경화 특성을 보였으며, 양이온 시스템을 접목한 하이브리드 시스템의 경우 양이온계 광개시제와 양이온계 모노머가 라디칼 생성과 확산까지 촉진 시켜 우수한 경화특성을 보이며, 라디칼 중합에 비해 산소에 의한 영향이 적은 양이온 중합의 영향으로 표면물성을 비롯한 도막 물성 또한 가장 우수하였다.

• 한국인쇄학회지
• /
• 제21권2호
• /
• pp.67-74
• /
• 2003

Barrier ribs for PDP(plasma display panel) are commonly utilized to have uniform height and width and to prevent opical crosstalk between adjacent cells. The requirements for such barrier ribs are uniform height and shape, low outgassing rate and low porosity, high aspect ratio, and fine resolution. In this study, we are studied about that to make efficiency of material and high quality barrier ribs for PDP. As a result, could got high barrier ribs of $140{\mu}m$ evenly in 1th phenomenon using watersoluble UV curing resin and know that flatness of upper part is also very good.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.352.2-352.2
• /
• 2014

In this present work, we report a Cu-Mn alloy as a materials for the self-forming barrier process. And we investigated diffusion barrier properties of self-formed layer on low-k dielectrics with or without UV curing treatment. Cu alloy films were directly deposited onto low-k dielectrics by co-sputtering, followed by annealing at various temperatures. X-ray diffraction revealed Cu (111), Cu (200) and Cu (220) peaks for both of Cu alloys. The self-formed layers were investigated by transmission electron microscopy. In order to compare barrier properties between Mn-based interlayer interlayer, thermal stability was measured with various low-k dielectrics. X-ray photoelectron spectroscopy analysis showed that chemical compositions of self-formed layer. The compositions of the Mn based self-formed barriers after annealing were determined by the C concentration in the dielectric layers.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.I
• /
• pp.396-398
• /
• 2005

Effects of such factors as polymerization temperature and a newly synthesized oligomeric photoinitiator(PEDI380) on the electro-optic characteristics of polymer/LC composite films prepared by the UV-curing method were investigated. The polymer-dispersed liquid crystal cells were made with oligomeric photoinitiator PEDI380 by UV-curing method exhibited both low driving volta ge($V_90$) and high contrast ratio under optimum formulation condition.

• 청정기술
• /
• 제22권3호
• /
• pp.203-207
• /
• 2016

Here, we report a novel fabrication technique for patchable organic lasing sheet based on non-volatile liquid organic semiconductors and freestanding polymeric film with high flexibility and patchability. For this work, we have fabricated the second-order DFB grating structure, which leads to surface emission, embedded in the freestanding polymeric film. Using an ultra-violet (UV) curable polyurethaneacrylate (PUA) mixture, the periodic DFB grating structure can be easily prepared on the freestanding polymeric film via a simple UV curing process. Due to unsaturated acrylate remained in the PUA mixture after UV curing, the freestanding PUA film provides adhesive properties, which enable mounting of the patchable organic lasing sheet onto non-flat surfaces with conformal contact. To achieve laser actions in the freestanding resonator structure, a composite material of liquid 9-(2-ethylhexyl)carbazole (EHCz) and organic laser dyes was used as the laser medium. Since the degraded active materials can be easily refreshed by a simple injection of the liquid composite, such a non-volatile liquid organic semiconducting medium has degradation-free and recyclable characteristics in addition to other strong advantages including tunable optoelectronic responses, solvent-free processing, and ultimate mechanical flexibility and uniformity. Lasing properties of the patchable organic lasing sheet were also investigated after mounting onto non-flat surfaces, showing a mechanical tunability of laser emission under variable surface curvature. It is anticipated that these results will be applied to the development of various patchable optoelectronic applications for light-emitting displays, sensors and data communications.

• 접착 및 계면
• /
• 제7권4호
• /
• pp.39-44
• /
• 2006

A new kind of silicone-epoxy composite is reported in this research. The silicone-epoxy resin was synthesized by the hydrosilylation of tetramethycyclotetrasiloxane and 4-vinyl-1-cyclohexene 1,2-epoxy with a high reaction yield. It was found that the obtained silicone-epoxy resin shows a high reactive activity to the aluminum complex-silanol catalyst. The resin could be cured under the catalysis of $(Al(acac)_3/Ph_2Si(OH)_2$ at a concentration below 0.1 wt% to give a hard cured resin showing excellent optical clarity, UV resistance and thermal stability. It was also found that the Si-H groups facilitated the curing reaction and the silicone-epoxy resin bearing Si-H group could be cured effectively even if $Ph_2Si(OH)_2h$ was absent. Moreover, the UV resistance and thermal stability were improved significantly by the introduction of Si-H groups. This is possibly due to the reductive property of Si-H groups which can annihilate radical and peroxide effectively. This kind of silicone-containing epoxy composite might have very promising applications as optical resin, optical adhesive and encapsulation materials for electronic devices.

• Bulletin of the Korean Chemical Society
• /
• 제33권2호
• /
• pp.473-482
• /
• 2012

A novel malemide epoxy containing Co(II), Ni(II) and Cu(II) ions have been synthesized by curing malemide epoxy resin (MIEB-13) and Co(II), Ni(II) and Cu(II) complexes of macrocyclic bis-hydrazone Schiff base. The Schiff base was synthesized by reacting 1,4-dicarbnyl phenyl dihydrazide with 2,6-diformyl-4-methyl phenol. The Schiff base and its Co(II), Ni(II) and Cu(II) complexes have been characterized by elemental analyses, spectral (IR, $^1H$ NMR, UV-vis., FAB mass, ESR), thermal and magnetic data. The curing reaction of maleimide epoxy compound with metal complexes was studied as curing agents. The stability of cured samples was studied by thermo-gravimetric analyses and which have excellent chemical (acid/alkali/solvent) and water absorption resistance. Further, the scanning electron microscopy (SEM) and definitional scanning colorimetric (DSC) techniques were confirmed the phase homogeneity of the cured systems.