• 한국안전학회지
• /
• 제28권5호
• /
• pp.35-40
• /
• 2013

Recently reclamation land is largely developed to utilize the land according to economic growth. The soil of landfill is soft, low shear strength, which makes it difficult to use the equipment. A large movement is occurred on the utility tunnel under construction. The inclined land with high water level and underground facilities are widely distributed and the excess pore water pressure may occur under construction similarly to this study. Some different conditions are made to design result, such as 4m of soil piling near the construction area, heavy rainfall during 2nd excavation that may cause flow liquefaction. To analyze the cause of transverse lateral movement, Three dimensional analysis are performed to four load cases, which is original design condition, flow liquefaction by heavy rainfall, unsymmetric lateral soil pressure, and both of them simultaneously. Ten steps of full construction stage, 1st excavation for utility tunnel, construction of utility tunnel, 1st refill, piling soil from 1m to 4 m, 2nd excavation for drainage culvert, liquefaction around the utility tunnel, construction of drainage culvert and 2nd refill, are take into account to investigate the cause of movement.

• 플랜트 저널
• /
• 제6권1호
• /
• pp.64-70
• /
• 2010

From 2000, the world plant market, especially plant developing business related to oil and gas, has been increasing. Domestic construction companies advance to overseas plant construction market actively, and proportioning to this, an importance of utility construction is increasing. However, the project becomes large and high-tech, and many companies experience difficulty of project management due to relatively high risk of overseas construction. In this study, we built the standard process with which domestic company can evaluate the risk of overseas plant utility construction. Primary factors for risk evaluation is derived, classification system is made out, primary factor is analyzed, and counter plan is suggested. And thorough management of risk is performed by risk management organization that manages the risks, risk control methods, reports and monitors through risk sheet and risk action log from the start of project to the end.

• 한국터널지하공간학회 논문집
• /
• 제20권6호
• /
• pp.931-946
• /
• 2018

도심지에서의 공동구의 활용성 증가에 따라 쉴드 TBM 공법이 적용된 터널식 공동구의 시공 및 연구개발이 활발히 진행되고 있다. 터널식 공동구는 지하굴착 공사로써 건설안전에 상대적으로 취약하지만, 건설업 재해율 감소를 위한 설계안전성 검토 제도 도입에도 불구하고 터널식 공동구 건설에 적합한 위험요소가 제대로 알려져 있지 않다. 따라서 본 연구에서는 터널식 공동구에 적합한 안전 위험요소를 발굴하고 이중에서 중점으로 관리되어야 할 핵심 안전 위험요소를 도출하였다. 도출된 핵심 안전 위험요소는 매트릭스 기법을 적용하여 위험성 평가를 실시함으로써 공동구 계획, 설계 및 시공 단계의 위험성 평가 및 주요 참고 자료로 사용될 수 있도록 하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2016년도 춘계 학술논문 발표대회
• /
• pp.19-20
• /
• 2016

Domestic construction industry has experienced many difficulties as it has been on a downward. It's a way that active modular structure market to solve this problem. However, as Modular structure technical standard in Korea is in the early stages, our modular factory maufactured rate is almost 40% lower than overseas. Besides, there is less design diversity so it just applies for a few buildings like low-rise building and general group barrackes. To deal with these problems, it is essential to modulating the equipment which can improve the production rate. This will help to ensure the quality, shortening of the construction period, the reduction of labor costs. We have defined the name of segmented by each installation location of the equipment to modulating equipment. And it was examined the suitability of the modulating of the location-specific utility system. The results of the analysis are discussed on the page.

• Computers and Concrete
• /
• 제32권1호
• /
• pp.15-26
• /
• 2023

In order to study the anti-seismic performance of full light-weight concrete utility tunnel, EL Centro seismic waves were input, and the seismic simulation shaking table test was carried out on the four utility tunnel models. The dynamic characteristics and acceleration response of the system consisting of the utility tunnel structure and the soil, and the interlayer displacement response of the structure were analyzed. The influence law of different construction methods, haunch heights and concrete types on the dynamic response of the utility tunnel structure was studied. And the experimental results were compared with the finite element calculation results. The results indicated that with the increase of seismic wave intensity, the natural frequency of the utility tunnel structure system decreased and the damping ratio increased. The assembling composite construction method could be equivalent to replace the integral cast-in-place construction method. The haunch height of the assembling composite full light-weight concrete utility tunnel was increased from 30 mm to 50 mm to enhance the anti-seismic performance during large earthquakes. The anti-seismic performance of the full light-weight concrete utility tunnel was better than that of the ordinary concrete utility tunnel. The peak acceleration of the structure was reduced by 21.8% and the interlayer displacement was reduced by 45.8% by using full light-weight concrete. The finite element simulation results were in good agreement with the experimental results, which could provide reference for practical engineering design and application.

• 국제학술발표논문집
• /
• The 9th International Conference on Construction Engineering and Project Management
• /
• pp.188-195
• /
• 2022

Although issuing change orders is a common practice in the construction phase of any project, non-structural utility subcontractors are struggling and seek to find a way to reduce change orders. Therefore, this paper presents the analysis results on change orders to cultivate possible suggestions and solutions on how to reduce or minimize change orders in mechanical, electrical, and plumbing (MEP) works. Change orders in non-structural utility works are analyzed based on six categories such as rerouting and change of location, changes in weight, rejected design by Office of Statewide Health Planning and Development, District Structural Engineer, or the Structural Engineer of Record, unforeseen conditions, changed equipment, and owner-initiated change. The analysis findings showed that rerouting and changing location is the most significant cause, followed by unforeseen conditions. The results not only contribute to the existing body of knowledge on change order research area, but also help MEP contractors reduce the time and cost of change orders.

• 한국건설관리학회논문집
• /
• 제14권4호
• /
• pp.164-171
• /
• 2013

도시개발에 있어 도로의 건설은 교통의 목적 외에 전기, 가스, 통신, 난방, 하수, 상수, 오수 등의 도시 편의시설을 위한 공간으로도 활용되고 있다. 하지만 현재 도로 시공과정에서 각 기능에 따른 관련 주체들이 진행되는 공사수행일정에 대한 의사소통이 충분히 이루어지지 않아 재굴착 작업이 빈번히 이루어지고 있으며 이로 인해 예산의 중복투입, 공사기간 지연, 품질저하, 이용자의 불편 등 여러 가지 문제점들이 나타나고 있다. 본 연구에서는 신도시 개발과 같은 대규모의 프로젝트에서 도로 재굴착으로 인한 문제를 사전에 예방하기 위해 시간과 공간데이터를 활용한 재굴착 방지 프로세스 모델을 개발하였으며, 이를 활용하여 도시기반시설 건설주체간 원활한 협의를 돕기 위한 재굴착방지시스템을 개발하였다. 아울러, 개발된 시스템을 개발중인 신도시 건설사업에 활용하여 그 적용성을 검토하였다.

• 한국안전학회지
• /
• 제30권5호
• /
• pp.29-36
• /
• 2015

Common utility tunnel is essential to the daily lives of people underground utilities (electricity, gas and supply facilities such as water, communication facilities, sewer facilities, etc.) to improve the appearance by co-acceptance and disaster prevention, important for the conservation of the city's population was concentrated road construction the city-based facilities. There is recognition of the importance of the various supply treatment facilities in common utility tunnel as infrastructure to accommodate joint according to the city expanded, the demand for infrastructure. In this paper, a cost-benefit analysis using a one-time occurrence, without simply relying on cost or current cost, project manager for the city-dimensional feasibility study conducted, the user level of the maintenance costs and user costs, including social costs items from various angles can be investigated and proposed a mechanism of economic feasibility common utility tunnel. Evaluation of the proposed technique is cost-benefit and cost caused by installing common utility tunnel the existing pipeline area - was investigated by the benefit analysis, extended and repeated common utility tunnel installation depends much affected by the excavation, so users of reducing the number of repeat excavation convenience can be seen that this occurs.

• 국제학술발표논문집
• /
• The 3th International Conference on Construction Engineering and Project Management
• /
• pp.1300-1306
• /
• 2009

If a brief direction and plan for a remodeling project are decided, it may moves to a concrete design step of which to select the most suitable alternative out of applicable compounding devices to reveal dynamic drifting performance. However, the volume of knowledge baseed utility which can refer to systematic evaluation regarding remodeling element technology and the accumulation of realistic cases are not only sufficient, but also short including its system for expression and consistency. Therefore, it may necessary to deliver the main frame which make enables the Owner, designer and builder to get performance technology for applying advanced remodeling element and knowledge based utility. There is a necessity to provide an information with latest made by virtue of modeling in the 3D/4D based on construction-based knowledge etc. which we can use for life cycle of a project, as a prominent way of knowledge based utility. Then, it is sure that remodeling can become more activative by sharing of knowledge based utility formed in electronic 3D/4D which is a systematic and expressed consistently to a performance and applicability in preservation of savings. It is expected for modeling of the 3D/4D in knowledge based utility enables to verify the practicability of each technology on effective application, and the use of technology might be spread widely due its obvious and oriented expressions. Further, this knowledge based utility formed in electronic 3D/4D may applicable for VE process in addition to remodeling design fields.

• 한국재난정보학회 논문집
• /
• 제18권2호
• /
• pp.364-373
• /
• 2022

연구목적: 본 논문은 지하공동구의 초기 화재 감지를 위해 CCTV를 활용한 AI 연기 객체 감지 모델을 개발하는데 목적이 있다. 연구방법:비정형성이 높은 연기 객체의 감지 성능을 제고하기 위해 화재 감지에 특화된 딥러닝 객체 감지 모델을 지하공동구 연기 감지에 특화되도록 학습시켰고, 학습데이터셋의 정제 및 학습 중 Gradient explosion 완화 등 감지 성능 개선을 위한 방법들을 적용해 모델 결과를 비교하였다. 연구결과: 결과는 제안된 방법을 통해 모델 성능을 향상시켰고 mAP 등의 지표를 평가를 통해 개발 모델이 우수한 성능을 보유하고 있음을 보여준다. 최종 모델은 지하공동구 환경의 연기에 대해 미탐이 낮은 반면 오탐이 다수 발견되는 성능을 보였다. 결론: 본 논문의 모델은 지하공동구 관리시스템과 연계를 통해 보완함으로써 지하공동구의 연기 객체 감지에 활용할 수 있을 것으로 판단된다.