• Journal of Korean Society for Atmospheric Environment
• /
• v.17 no.4
• /
• pp.331-345
• /
• 2001

The increase of carbon monoxide in the ambient air due to the emissions from point sources without control was estimated using three -dimensional numerical models. The target area was Ulsan where one of the largest industrial complexes was located. As a typical example using numerical models for air quality impact analysis of criteria pollutants that will determine whether the air quality standards would be exceeded or not, the following approaches were suggested. They include: (1) investigation of pre-existing atmospheric conditions, (2) identification of major factors causing high concentrations, (3) selection of episode days. (4) preparation of three-dimensional meteorological data, (5) confirmation of agreement between measured and predicted concentrations in the emission conditions of episode days, and (6) estimation of the impact due to changes of the emission conditions. In the present work, daily meteorological conditions for the specific period were classified into four clusters of distinctive features, and the episode days were selected individually from each cluster. Emphasis was placed on the selection of episodes representing meteorological conditions conducive to high concentrations especially for point sources that were sensitive to the wind direction variations.

• Journal of the Korean Society of Physical Medicine
• /
• v.9 no.4
• /
• pp.407-413
• /
• 2014

PURPOSE: We investigated the influence of heel insole and visual control on body sway index with high-heeled shoes. METHODS: The subjects of this study were 61 healthy students. None of the participants had any orthopedic or neurologic alterations. C90 area, C90 angle, trace length, sway average velocity were measured using a force plate by BT4. The variables were measured both with insole and without insole when wearing high-heeled shoes under the conditions of eyes open and eyes closed. The collected data were analyzed using the Kolmogorov-Smirnov test and paired t-test. RESULTS: When wearing high-heeled shoes with insole under the conditions of eyes open, trace length, C90 area, velocity were significantly more decreased than without insole (p<.01). When wearing high-heeled shoes with insole under the conditions of eyes closed, only C90 area was significantly more decreased than without insole (p<.05). When wearing high-heeled shoes with insole under the conditions of eyes open, trace length, C90 area, velocity were significantly more decreased than under the conditions of eyes closed (p<.01). CONCLUSION: The present study demonstrates that the use of high-heeled shoes with insole supported from heel to midfoot more increased static balance than without insole under the conditions of eyes open.

• Geomechanics and Engineering
• /
• v.16 no.1
• /
• pp.1-9
• /
• 2018

In this paper an efficient and simple refined shear deformation theory is presented for the free vibration of Functionally Graded Plates Under Various Boundary Conditions. The theory accounts for a quadratic variation of the transverse shear strains across the thickness, and satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. The number of independent unknowns of present theory is four, as against five in other shear deformation theories. The plates are considered of the type having two opposite sides simply-supported, and the two other sides having combinations of simply-supported, clamped, and free boundary conditions. The mechanical properties of functionally graded material are assumed to vary according to power law distribution of the volume fraction of the constituents. Equations of motion are derived using Hamilton's principle. The results of this theory are compared with those of other shear deformation theories. Various numerical results including the effect of boundary conditions, power-law index, plate aspect ratio, and side-to-thickness ratio on the free vibration of FGM plates are presented.

• 유체기계공업학회:학술대회논문집
• /
• 1999.12a
• /
• pp.245-251
• /
• 1999

The structural analysis of a reactor coolant pump(RCP) of a nuclear power plant is very important for the safety assessment of the plant. Accurate boundary conditions for the heat transfer coefficient are required for reliable thermal stress analysis of the pump casing, especially in transient operations of the pump since the coolant properties are largely dependent on operational conditions. In the present study, a 3D mixed flow type coolant pump was modeled from the RCP drawings and analyzed in the steady state and number of transient flow conditions by using a commercial code STAR-CD. From the result of the computation, it is seem that the average heat transfer coefficients for the cases considered are found to be the suggested values of the manufacturer, Westinghouse Energy System. The unevenness in local heat transfer coefficients, however, is found to be considerable so that the use of average heat transfer coefficients in all boundaries might not give reliable thermal stresses.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.401-404
• /
• 1998

In this paper, we present robust reliable $H\infty$ controller design methods of continuous and discrete uncertain time delay systems through LMI(linear matrix inequality) approach, respectively. Also the existence conditions of state feedback control are proposed. Using some changes of varables and Schur complements, the obtained sufficient conditions are transformed into LMI form. We show the validity of the proposed method through numerical examples.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.4
• /
• pp.1179-1182
• /
• 2011

In the present work, successful implementation of ultrasound irradiations for the rapid synthesis of 1,5-benzodiazepine derivatives under solvent-free conditions is demonstrated. Use of a novel catalyst i.e. camphor sulphonic acid in combination with ultrasound technique is reported for the first time. Comparative study for the synthesis of 1,5-benzodiazepines using conventional as well as ultrasonication method is discussed.

• Journal of applied mathematics & informatics
• /
• v.34 no.3_4
• /
• pp.221-225
• /
• 2016

For a connected graph G = (V, E), its inverse degree is defined as $\sum_{{\upsilon}{\in}{V}}^{}\frac{1}{d(\upsilon)}$. Using an upper bound for the inverse degree of a graph obtained by Cioabă in [4], we in this note present sufficient conditions for some Hamiltonian properties and k-connectivity of a graph.

• Journal of applied mathematics & informatics
• /
• v.6 no.3
• /
• pp.757-770
• /
• 1999

We analyse in this paper the possibility of using preconditioning techniques as for square non-singular systems, also in the case of inconsistent least-squares problems. We find conditions in which the minimal norm solution of the preconditioned least-wquares problem equals that of the original prblem. We also find conditions such that thd Kaczmarz-Extendid algorithm with relaxation parameters (analysed by the author in [4]), cna be adapted to the preconditioned least-squares problem. In the last section of the paper we present numerical experiments, with two variants of preconditioning, applied to an inconsistent linear least-squares model probelm.

• 한국전산유체공학회:학술대회논문집
• /
• 1995.10a
• /
• pp.188-193
• /
• 1995

Incompressible developing entry flows through square ducts with 90 degree bends are studied numerically by using an efficient implicit SMAC scheme with different boundary conditions. This study eventually aimed at passage flow analysis of turbomachinery elements with a strong curvature such as centrifugal impeller or draft tube. The generalized implicit scheme used in the present study has been developted to solve the three-dimensional Navier-Stokes equations by the author. Numerical results for some different numerical conditions are obtained and compared with each other

• Communications of the Korean Mathematical Society
• /
• v.35 no.4
• /
• pp.1329-1352
• /
• 2020

In this paper we consider a class of nonlinear evolution equations on infinite dimensional Banach spaces driven by vector measures. We prove existence and uniqueness of solutions and continuous dependence of solutions on the control measures. Using these results we prove existence of optimal controls for Bolza problems. Based on this result we present necessary conditions of optimality.