• 대한가정학회지
• /
• 제39권10호
• /
• pp.97-109
• /
• 2001

It is thought that a composition of trousers is related to fabrics with single breadth. Therefore, trousers are designed with pattern using this fabrics with single breadth. However, in the old pattern of trousers, the breadth of 33cm-35cm was not considered in designing patterns. In this context, deciding which pattern design is better is not easy as there are a variety of estimation methods. So in this study, standardization of drafting is pursued by an objective pattern design. For this, a base angle of the trouser closely relating to a form and function was measured and using the height and the base angle, a trouser pattern design was tried. For a measurement of the base angle, 5 subject were selected. They are 25-29 year-old male graduates with fine physical standard. The base angle was measured with symphysis pubis point as a standard when subjects sat with their legs crossed, when they stood with their legs open (not forced artificially) and when they laid down with their legs open. The distance between a knee inside joint and knees was measured three times and the resultant value was used for the pattern design. For a design of trousers, the height was applied and the base angle was fixed. As a pattern drawing, using the height, a base angle and circumference of the hip, a trouser was designed. The production method for the pattern design is as follow: (1) The length formula, is height + $\frac{height}{2}$ (2) The hip girth formula is $\frac{hipgirth}{2}$ - $\frac{hipgirth}{20}$(3) A crotch angle is fixed at $72^{\circ}$. (4) The ratio of outer leg length to leg width is 5 : 8. (5) The component ratio of the upper outer leg length to the pant length is 5 : 8. (6) The ratio of the division point of front right inner leg length and left inner width to upper outer leg length is 5 : 8.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2022년도 추계학술대회
• /
• pp.194-196
• /
• 2022

레이더 안테나에서 송신된 전파가 표적에 맞으면 표적의 전기적 특성, 외형 등에 따라 특정한 형태의 전계가 형성되는데, 이를 RCS 패턴이라 한다. 표적의 RCS를 계산하여 RCS 패턴을 플로팅 하는 다양한 상용 프로그램이 있으며, 군함이나 선박과 같은 큰 표적의 해석을 위해서는 저주파 해석기법 보다는 계산 속도가 빠른 고주파 해석기법이 적용된 프로그램이 적합하다. 고주파 해석 프로그램인 XGTD는 표적의 360도 전 방위에 대한 2차원 RCS 패턴을 빠른 시간에 플로팅 가능하나, 3차원 RCS 패턴은 구할 수 없다. 본 논문에서는 XGTD를 이용하여 다양한 각도에서 표적의 2차원 RCS 패턴을 플로팅하고, 이를 이용하여 3차원 RCS 패턴을 생성한 후 3차원 안테나 패턴 파일로 변환하여 활용하는 방안을 제안하였다.

• 융합보안논문지
• /
• 제1권1호
• /
• pp.37-45
• /
• 2001

In this paper, separated and optimized pattern database model is proposed. In order to improve efficiency of Network-based IDS, pattern database is classified by proper basis. Classification basis is decided by the specific Intrusions validity on specific target. Using this model, IDS searches only valid patterns in pattern database on each captured packets. In result, IDS can reduce system resources for searching pattern database. So, IDS can analyze more packets on the network. In this paper, proper classification basis is proposed and pattern database classified by that basis is formed. And its performance is verified by experimental results.

• 반도체디스플레이기술학회지
• /
• 제2권4호
• /
• pp.1-7
• /
• 2003

In this paper, we design the pattern generator circuits using PLDs(Programmable Logic Devices). The pattern generator is the circuit which generates the test pattern signal for the inspection of logical defects of semiconductor products. The proposed circuits are designed by the PLD design tool(MAX+ II of ALTERA). Also the designed circuits are simulated for the verification of the designed ones. The simulation results have a good performance.

• 한국생산제조학회지
• /
• 제26권3호
• /
• pp.344-349
• /
• 2017

In this study, we developed a process technology to fabricate RFID tag antennas using a one-sheet inlay micro-pattern forming process by press-molding RFID tag antennas on insulation sheet layers, such as polymer films, using ultrasonic longitudinal vibration. In addition, a fine pattern applicable for RFID tag antennas was manufactured using a $25{\mu}m$ thick thin-plate square wire; this is in contrast to the method that uses a conventional round wire. The developed ultrasonic indentation process can be used to fabricate fine pattern of the RFID antenna using one piece of equipment. The simplified manufacturing process technology has a shorter manufacturing time and is more economical. The developed RFID tag antenna forming technique involves pressing the $25{\mu}m$ square wire directly on the thin sheet insulation sheet of maximum thickness $200{\mu}m$, using a 60 kHz ultrasonic tool horn.

• 한국지능시스템학회논문지
• /
• 제4권3호
• /
• pp.32-48
• /
• 1994

This paper proposes the compensation algorithm of conventional shift pattern using fuzzy reasoning in automatic transmission vehicles. Recently, automatic transimssion vehicles are continually increasing because of theire ease to drive. Also users require the high performance which includes the smooth shift quality and shift scheduling that matches driver;s intentions. So the shift scheduling has been inproved significantly through the application of electronic control. But, in spite of this development, vehicles using conventional shift pattern are sometimes in discord with driver's intention on roads. In this paper, the paper, the proposed compensation algorithm makes a automatic transmission vehicle be able to select an optimal gear shifting time and position using fuzzy reasoning and make a vehicle driver feel confortable even when the vehicle runs on roads which is extremely changed. Therefore, a vehicle driver can expect to reduce the nimber of unnecessary gear shifting and expect the fuel efficiency high. To show usefulness of the proposed method, some simulation are made to compared with conventional gear shifting. Paper prosposes the compensation mehtod of conventional shift pattern using fuzzy reasoning for the purpose that a vehicle can select an optimal gerar shifting time and position in automatic vehicle. Though the conventional shift pattern has no pliability, vehicle driver can feel comfortable and can reduce the number of unnecessary gear shifting using the proposed method on variable road condition. Therefore, it can be expected the fuel efficiency.

• 대한한의학회지
• /
• 제40권4호
• /
• pp.49-60
• /
• 2019

Objectives: To develop a standardized diagnostic pattern identification equation for stroke patients, our group conducted a study to derive the predictive logistic equations. However, the sample size was relatively small. In the current study, we aimed to derive new predictive logistic equations for each diagnostic pattern using an expanded number of subjects. Methods: This study was a hospital-based multi-center trial recruited stroke patients within 30 days of symptom onset. Patients' general information, and the variables related to diagnostic pattern identification were measured. The diagnostic pattern of each patient was identified independently by two Korean Medicine Doctors. To derive a predictive model for pattern identification, binary logistic regression analysis was applied. Results: Among the 1,251 patients, 385 patients (30.8%) had the Fire Heat Pattern, 460 patients (36.8%) the Phlegm Dampness Pattern, 212 patients (16.9%) the Qi Deficiency Pattern, and 194 patients (15.5%) the Yin Deficiency Pattern. After the regression analysis, the predictive logistic equations for each pattern were determined. Conclusion: The predictive equations for Fire Heat, Phlegm Dampness, Qi Deficiency, and Yin Deficiency would be useful to determine individual stroke patients' pattern identification in the clinical setting. However, further studies using objective measurements are necessary to validate these data.

• 한국멀티미디어학회논문지
• /
• 제8권11호
• /
• pp.1556-1564
• /
• 2005

원시 프로그램에 대한 컴파일 과정 중 최적화 단계에서는 프로그램의 실행 속도를 개선시키고 코드 크기를 줄일 수 있는 다양한 최적화 기법을 수행한다[17]. 최적화 패턴 매칭 방법 중 스트링 패턴 매칭 방법은 중간 코드에 대응하는 최적의 패턴을 찾기 위한 방법으로 과다한 최적화 패턴 검색 시간으로 비효율적이다. 트리 패턴 매칭은 패턴 결정시 중복 비교가 발생할 수 있으며, 코드의 트리 구성에 많은 비용이 드는 단점을 가지고 있는 방법들이다[16,18]. 본 논문에서는 기존의 최적화 방법들의 단점을 극복하기 위한 방법으로 DFA (Deterministic Finite Automate) 최적화 테이블을 이용한 코드 최적화기를 제안하려고 한다. 이 방법은 다른 패턴 매칭 기법보다 결정적인 오토마타(Automata)로 구성하기 때문에 비용은 적어지고, 오토마타를 통해 결정적으로 패턴이 확정됨에 따른 패턴 선택 비용이 줄어들며, 최적화 패턴 검객 시간도 빨라지는 효율적인 방법의 최적화기이다.

• 대한의용생체공학회:의공학회지
• /
• 제15권4호
• /
• pp.455-464
• /
• 1994

The intelligent trajectory control method that controls moving direction and average velocity for a prosthetic arm is proposed by pattern recognition and force estimations using EMG signals. Also, we propose the real time trajectory planning method which generates continuous accelleration paths using 3 stage linear filters to minimize the impact to human body induced by arm motions and to reduce the muscle fatigue. We use combination of MLP and fuzzy filter for pattern recognition to estimate the direction of a muscle and Hogan's method for the force estimation. EMG signals are acquired by using a amputation simulator and 2 dimensional joystick motion. The simulation results of proposed prosthetic arm control system using the EMG signals show that the arm is effectively followed the desired trajectory depended on estimated force and direction of muscle movements.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3021-3026
• /
• 2007

In this paper, experimental data on flow pattern transition of inclination angles from 0-90 are presented. A test section is constructed 2 mm long and I.D 1inch using transparent material. The test section is supported by aluminum frame that can be placed with any arbitrary inclined angles. The air-water two-phase flow is observed at room temperature and atmospheric condition using both high speed camera and void impedance meter. The signal is sampled with sampling rate 1kHz and is analyzed under fully-developed condition. Based on experimental data, flow pattern maps are made for various inclination angles. As increasing the inclination angels from 0 to 90, the flow pattern transitions on the plane jg-jf are changed, such as stratified flow to plug flow or slug flow or plug flow to bubbly flow. The transition lines between pattern regimes are moved or sometimes disappeared due to its inclined angle.