• Journal of Applied Biological Chemistry
• /
• v.59 no.2
• /
• pp.95-98
• /
• 2016

Phototactic behavioral responses of the Indian meal moth, Plodia interpunctella ($H{\ddot{u}}bner$), adults were determined to different light-emitting diodes (LEDs) of seven wavelengths, and their behavioral responses were compared to that using a commercial luring lamp (BLB) under laboratory conditions. Based on the attractive responses under optimal light conditions (60 lx luminance intensity and 30 min light exposure time), the green LED ($520{\pm}5nm$) showed the highest attractive rate ($520{\pm}5nm$, 52.2 %), followed by the blue LED ($470{\pm}10nm$, 33.9 %), the yellow LED ($590{\pm}5nm$, 32.2 %), BLB (28.9 %), UV LED (365 nm, 22.8 %), the red LED ($625{\pm}10nm$, 14.5 %), the white LED (450-620 nm, 10.6 %), and IR LED (730 nm, 9.5 %). In addition, the green LED to P. interpunctella adults was approximately 1.81 times more attractive than BLB. These results indicate that the green LED could be most useful for monitoring of P. interpunctella adults.

• Reproductive and Developmental Biology
• /
• v.32 no.4
• /
• pp.217-222
• /
• 2008

The techniques of IVM, IVF and IVC of canine oocytes may provide useful information for gamete salvage programs and the conservation of endangered canidae. This investigation has been made to determine the efficiency of in vitro maturation (IVM) as a basic experiment to study the development of canine oocytes after in vitro fertilization (IVF). The rate of oocytes developing to the Mil stage was higher in the hormone treated group (10 IU/ml hCG+eCG, 14.7%, p<0.05) than in the control group (0 IU/ml hCG+eCG, 10.0%). The monospermy and pronuclear rates of canine oocytes were investigated after caffeine treatment on IVF. Canine oocytes were fertilized in the Fert-TALP medium supplemented with 0, 10, 20 or 30 mM caffeine (Fert I, Fert II, Fert III or Fert IV, respectively). The highest pronuclear formation rate was obtained in the Fert I for 24 h IVF (6.7%, 6/89). Therefore, it is believed that unlike in other mammals, caffeine in canine IVF does not increase the efficiency of fertilization rate, and is not an important factor.

• The Journal of Korean Medicine Ophthalmology and Otolaryngology and Dermatology
• /
• v.22 no.1
• /
• pp.157-171
• /
• 2009

Objective : The face is very important for human communication. So facial palsy patients experience not only physical disturbances but also serious emotional stress. Therefore the focus of treatment must be to not only aid the recovery of objective symptoms but also the improvement of subjective quality of life. However there has not been enough Oriental Medical study in this field until now. Thus this study was begun to suggest a useful index for the treatment of facial palsy. Methods : Grade of paralysis, sequelas, and quality of life were used for evaluation. To evaluate Grade of paralysis, House-Brackman Grade was used as the Gross scale and Kim's Grade was used as the Regional scale. Sequelas were evaluated by muscle contraction, synkinesis, NA, and grade of philtrum tilt. Quality of life was evaluated by SF-36v2, Facial Disability Index, and Vas. Results & Conclusion : 1. The change of grade of paralysis between the early and the present time reveals remarkable improvement statistically. 2. There was a remarkable improvement in all parts of quality of life except several areas of SF-36(RP, RE, MH, VT) 3. In only PF(Physical Function) of FDI, quality of life increased remarkably according to the improvement of grade of paralysis. 4. There is the positive relationship among Kim's grade, HB grade and Synkinesis 2. 5. Synkinesis among sequelas has the greatest effect on quality of life. And muscle contraction, change of NA, and grade of philtrum tilt also affect quality to some extent. 6. There was no remarkable relationship between the period of illness and change of quality of life. 7. Change of NA is shown after 3 months of illness and synkinesis becomes worse after 6 months of illness.

• Imaging Science in Dentistry
• /
• v.51 no.1
• /
• pp.73-80
• /
• 2021

Purpose: The purpose of this study was to evaluate the cone-beam computed tomographic (CBCT) imaging and histopathological characteristics of osteoradionecrosis(ORN) and medication-related osteonecrosis of the jaw(MRONJ). Materials and Methods: Ten surgical specimens from segmental mandibulectomy (3 ORN and 7 MRONJ) were analyzed using CBCT. The CBCT parameters were as follows: high-resolution mode (tube voltage, 90.0 kV; tube current, 4.00 mA; rotation time, 16.8 s; field of view, 56 mm×56 mm; thickness, 0.099 mm). Histopathological characteristics were evaluated using histological slides of the surgical specimens. The Pearson chi-square test was used to compare ORN and MRONJ in terms of CBCT findings(internal texture, sequestrum, periosteal reaction and cortical perforation) and histopathological characteristics(necrotic bone, inflammatory cells, reactive bone formation, bacteria, Actinomyces, and osteoclasts). A P value less than 0.05 was considered to indicate statistical significance. Results: MRONJ showed periosteal reaction on CBCT more frequently than ORN (7 of 7 [100%] vs. 0 of 3 [0%], P<0.05). Regarding histopathological characteristics, MRONJ showed osteoclasts more frequently than ORN (6 of 7 [85.7%] vs. 0 of 3 [0%], P<0.05). Conclusion: This study evaluated the CBCT imaging and histopathological characteristics of ORN and MRONJ, and the findings suggest that CBCT could be useful for the evaluation of ORN and MRONJ.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.11
• /
• pp.5527-5545
• /
• 2019

Through-wall ultra-wide band (UWB) radar has been considered as one of the preferred and non-contact technologies for the targets detection owing to the better time resolution and stronger penetration. The high time resolution is a result of a larger of bandwidth of the employed UWB pulses from the radar system, which is a useful tool to separate multiple targets in complex environment. The article emphasised on human subject localization and detection. Human subject usually can be detected via extracting the weak respiratory signals of human subjects remotely. Meanwhile, the range between the detection object and radar is also acquired from the 2D range-frequency matrix. However, it is a challenging task to extract human respiratory signals owing to the low signal to clutter ratio. To improve the feasibility of human respiratory signals detection, a new method is developed via analysing the standard deviation based kurtosis of the collected pulses, which are modulated by human respiratory movements in slow time. The range between radar and the detection target is estimated using joint time-frequency analysis (JTFA) of the analysed characteristics, which provides a novel preliminary signature for life detection. The breathing rates are obtained using the proposed accumulation method in time and frequency domain, respectively. The proposed method is validated and proved numerically and experimentally.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.7 no.1
• /
• pp.63-74
• /
• 2011

LED design works make user experience the conditions of time and space, and enable maximized spatial exploration and pursuit of ultimate sources. Light itself includes an ample dimension of time and, through the process of on and off, time-duration, similarity, and discontinuation is reorganized. LED design works make people experience the conditions of time and space, and enable maximized spatial exploration and pursuit of ultimate sources. LED design have been approached more from the viewpoint of material than from the viewpoint of aesthetics. LED based environmental design will be embedded deeply into our life with the technology of ubiquitous city. As the problem of the light intensity, tempo of change LED motion graphic and colors, substitutability is almost completely resolved now, LED is have more potentials than any other material as a tool of motion graphic. These result well make that using of LED is could be better useful from now on. In edition, users could be offered better beneficial lighting environment, and they will enjoy their better lives in the future.

• Journal of Veterinary Science
• /
• v.22 no.5
• /
• pp.47.1-47.10
• /
• 2021

Background: Due to multiple similarities in the structure and physiology of human and pig skin, the pig model is extremely useful for biological drug testing after subcutaneous administration. Knowledge of the differences between subcutaneous injection sites could have a significant impact on the absorption phase and pharmacokinetic profiles of biological drugs. Objectives: This study aimed to analyze the impact of administration site on pharmacokinetics and selected biochemical and hematological parameters after a single subcutaneous administration of ustekinumab in pigs. Drug concentrations in blood plasma were analyzed by enzyme-linked immunosorbent assay. Pharmacokinetic analyses were performed based on raw data using Phoenix WinNonlin 8.1 software and ThothPro v 4.1. Methods: The study included 12 healthy, female, large white piglets. Each group received a single dose of ustekinumab given as a 1 mg/kg subcutaneous injection into the internal part of the inguinal fold or the external part of the inguinal fold. Results: The differences in absorption rate between the internal and external parts of the inguinal fold were not significant. However, the time of maximal concentration, clearance, area under the curve calculated between zero and mean residence time and mean residence time between groups were substantially different (p > 0.05). The relative bioavailability after administration of ustekinumab into the external part of the inguinal fold was 40.36% lower than after administration of ustekinumab into the internal part of the inguinal fold. Conclusions: Healthy breeding pigs are a relevant model to study the pharmacokinetic profile of subcutaneously administered ustekinumab.

• Journal of Korean Society of Environmental Engineers
• /
• v.38 no.6
• /
• pp.291-298
• /
• 2016

Electrochemical water treatment process as a useful treatment method for the removal of non-degradable matter has been consistently studied for several decades. Key process of electrochemical water treatment are oxidation reaction from an anode and reduction from a cathode. In this study, the effect of pre-treatment methods in the insoluble electrode manufacturing process for the water treatment has been evaluated for the life time of electrode The results of this study showed that pre-treatment methods of a base metal such as surface roughness, clean method and interlayer formation influenced to life time of electrode when the same condition (catalyst electrode layer coating method and material system) was applied for pre-treatment methods. This study was conducted by using $IrO_2/Ti$ electrode In the test of sand-blasting process, an electrode manufactured by using sanding media of different sizes resulted in the most effective electrode life time when the size of alumina was used for $212{\sim}180{\mu}m$ praticle size (#80). The most effective method was considered using arc plasma in the additional roughness control and cleaning process, sputtering method to form Ta type interlayer formation process.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.98-103
• /
• 2014

Purpose: The effective half life of I-131 is useful to calculate radiation dose, period of hospitalization, and exposure dose of surrounding people from patient. However, it is difficult to measure. This study estimates the effective half life in whole body and thyroid in using of value of residual radioactivity obtained from the early and delay images of Dual time I-131 whole body scan. Also, the correlations between the effective half life and serum creatinine, GFR, and administration dose were investigated in this study. Materials and Methods: The targets were 50 patients administration high dose of I-131 from February to August in 2013, having normal range of serum creatinine and over $30{\mu}IU/mL$ of TSH levels. After administration radioactive I-131, the early scan in the 3rd day and the delay scan in the 5-6th days were performed. To measure the residual radioactivity in the whole body and thyroid, ROI was set and then background radioactivity was corrected to estimate. The effective half life was estimated by calculating the ratio of measured values between the early and delay images. To compare the effective half lives of the whole body and thyroid, it was analyzed by Independent t-test, and each correlation of the effective half life, GFR, serum creatinine, and the dose of administration were analyzed by calculating the pearson's correlation coefficient. All of the analysis were determined to be statistically significant when P<0.05. Results: The effective half life of the whole body was $17.06{\pm}5.50$ hours and of the thyroid was $17.22{\pm}5.41$ hours. The two effective half life did not show significant difference (P=0.887). As the value of GFR was increased, the effective half life of whole body (r=-0.407, P=0.003) and of thyroid (r=-0.473, P=0.001) were significantly decreased; as the value of serum creatinine was increased, the effective half life of whole body (r=0.309, P=0.029) and of thyroid (r=0.371, P=0.008) were significantly increased. In the administration dose, effective half life did not have correlations. Conclusion: The effective half life of I-131 of patients treated for their thyroids were estimated only by using the images of Dual time I-131 whole body scan. Also, the correlations with the effective life, GFR, and serum creatinine were examined. This study might be utilized for a study on optimization for the period of hospitalization of patients treated by high dose of I-131 and on evaluation for internal absorbed dose of MIRD schema in application of the effective half life.

• Journal of Korean Institute of Industrial Engineers
• /
• v.22 no.3
• /
• pp.459-471
• /
• 1996

This paper considers ramp tests for exponential lifetime distribution when there are limitations on test stress and test time. The inverse power law and a cumulative exposure model are assumed. Maximum likelihood (ML) estimators of model parameters and their asymptotic covariance matrix are obtained. The optimum ramp test plans are also found which minimize the asymptotic variance of the ML estimator of the log mean life at design constant stress. For selected values of the design parameters, tables useful for finding optimal test plans are given. The effect of the pre-estimates of design parameters is studied.