Proceedings of the Korean Society of Dyers and Finishers Conference
/
2011.11a
/
pp.42-42
/
2011
To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordants effect of Hwangsu spring were analyzed by pH, temperature, trace elements, organic matter and color fastness. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, in Yeongcheon (Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. Hwangsu spring during storage at $25^{\circ}C$ turned brown by photochemical reaction. The Result of ICP analysis, it contained Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm) and observed character by water analysis. Dyeing and post-mordant procedure; Cotton(KS K 0905) were dyed with clove powder for 30 min at $70^{\circ}C$. Hwangsu spring, Aluminium Sulfate $14-18H_20(Al_2(SO_4)_3{\cdot}14-18H_2O)$, Iron Sulfate Heptahydrate($FeSO_4{\cdot}7H_2O$) were used by post mordant at the same ratio. The dyed fabrics were treated with 20% each mordant solution at $25^{\circ}C$ for 10min. Comparison with a reproduced chemical mordant, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.
The experiment was divided into two phases. In phase-I fresh embryos were transferred and in Phase-II frozen embryos were transferred. Embryos were collected by using Dulbecco's phosphate buffered saline. In phase-I total of 65 ova were collected out of 107 ovulation in 18 goats. Recovery of ova was 60.74%, of which 51 (78.46%) was fertilized. Sixteen embryos were transferred to 10 recipient goats and kidding was observed in 6 goats, that produced 10 kids. Thus, 62.50% embryo survival and 60% kidding were achieved in phase-I. In phase-II of the experiment, 17 regular cyclic Black Bengal goats were used. The main purpose was to study the viability of caprine embryos after cryopreservation. In this phase the embryos were collected and frozen using Bio-cool freezers. A two step addition of cryoprotectants (5% glycerol and 10% glycerol) and three-step dilution of cryoprotectants with 1mole (M) sucrose was used. Embryos were preserved for 10 to 45 days. Out of 27 embryos preserved, 18 were recovered after freezing and thawing (37$^{\circ}C$ water bath) with 33.33% embryonic loss. Seventeen frozen and thawed embryos were transferred in 9 recipient goats, out of which kidding was observed in 6 goats and 7 kids were produced, giving a 66.66% kidding and embryo survival of 41.17%. The technique utilized for fresh and frozen embryo transfer can be successfully utilized to produce goats of superior genetic merits. The protocol used for addition of cryoprotectant, freezing, thawing and dilution was found suitable for caprine embryo freezing.
Kim, Kwang Soo;Park, Jung O;Lee, Ju Haeng;Jun, Tae Hwan;Kim, Ilho
Environmental Engineering Research
/
v.18
no.4
/
pp.229-234
/
2013
This study aimed to develop a new dust collecting system equipped with an activated carbon (A.C.) coated electrode. Before fabrication, pre-treatment of A.C. was performed to remove metal ions within the A.C. to enlarge its specific surface area. Then, pre-treated A.C., black carbon, polyvinyl acetate (PVAc), and methanol were mixed to make a gel compound, which was coated onto aluminum plates to fabricate electrodes. The optimal mixing ratio of A.C., black carbon, PVAc, and methanol was found to be 10 g: 2 g: 3 g: 20 mL. After fabrication, the electrodes were used in the batch-type experiment for $NH_3$ and $H_2S$ removal. The reduction rates of the gases were high at the beginning and slowly reduced with time. Dust collection experiments were conducted in continuous flow, with various voltages applied. Compared to 5 kV, dust removal efficiency was 1.5 times higher when 10 kV was applied. Increasing the number of electrodes applied also increased the collecting efficiency. The correlation coefficient between actual collecting efficiency and trend line was higher than 99%. Consequently, the novel dust collection system equipped with A.C. coated electrode appears to be a promising substitute for existing dust-control devices.
For effectively photochemical hydrogen production, Ti ions (0.01, 0.10, 0.50 mol%) impregnated $WO_3$ ($Ti/WO_3$) nanometer sized particles were prepared using a impregnation method as a photocatalyst. The characteristics of the synthesized $Ti/WO_3$ photocatalysts were analyzed by X-ray diffraction (XRD), scanning electron microscopy (SEM), photoluminescence spectra (PL), atomic force microscope (AFM), and electrostatic force microscope (EFM). The evolution of $H_2$ from methanol/water (1/1) photo-splitting over $Ti/WO_3$ photocatalysts was enhanced compared to those over pure $TiO_2$ and $WO_3$ photocatalysts; 3.02 mL of $H_2$ gas was evolved after 8 h when 0.5 g of a 0.10 mol% $Ti/WO_3$ catalyst was used.
This paper confirmed the applicability of model to Korean rivers through the calibration and sensitivity analysis of LRCS rainfall runoff model for 18 storm events of Songriweon station in Nakdong river system, and achieved that LS and WLS were better than LAD by model fitting results. Diagonal element of "hat" matrix and affluence measures were used by analysis of parameter estimates, and parameter IL was the most important parameter in model output. By the results of error propagation according to parameter error, parameters IL, TP, F1 were affected by error propagation, and this is measure of sensitivity for the model output. This paper confirmed the relationship of calibration and sensitivity analysis of model through analysis of sensitivity coefficient, diagonal element $h_i$ and $D_i$._i$.
To find proper lathe machining parameters for SA182 Grade 304 stainless steel (SS), six kinds of samples with different machining surface states were prepared using a lathe. Surface morphologies and microstructures of near surface deformed layers on different samples were analysed. Surface morphologies and chemical composition of oxide films formed on different samples in simulated primary water with $100{\mu}g/L\;O_2$ at $310^{\circ}C$ were characterized. Results showed that surface roughness was mainly affected by lathe feed. Surface machining caused grain refinement at the top layer. A severely deformed layer with different thicknesses formed on all samples. In addition to high defect density caused by surface deformation, phase transformation, residual stress, and strain also affected the oxidation behaviour of SA182 Grade 304 SS in the test solution. Machining parameters used for # 4 (feed, 0.15 mm/r; back engagement, 2 mm; cutting speed, 114.86 m/min) and # 6 (feed,0.20 mm/r; back engagement, 1 mm; cutting speed, 73.01 m/min) samples were found to be proper for lathe machining of SA182 Grade 304 SS.
Objectives: The objective of this study is to investigate the effects of Silbi-um (SBU) extract on the alcoholic fatty liver induced by EtOH administration for 8 weeks. Methods: Male Sprague Dawley rats were used. All animals were randomly divided into 3 groups; Normal, EtOH and EtOH+SBU. The rats of EtOH group were daily treated with ethanol of 25% (v/v) for 8 weeks (n=10). EtOH+SBU group was orally treated with SBU water extract after ethanol administration (n=10). The rats of Normal group were treated with saline (n=10). After 8 weeks, the mean body weight, liver weight, and liver-body weight ratio were calculated. The serum alanine aminotransferase (ALT) and aspartate aminotransferase (AST) of all groups were measured. The morphological alterations were observed using hematoxylin and eosin (H&E) and Oil Red O staining. Moreover, the alteration of tumor necrosis $factor-{\alpha}$ ($TNF-{\alpha}$) levels were analyzed immunohistochemistrically. Results: The histological data showed that liver sections from EtOH group displayed severe steatosis. SBU extract significantly inhibited the progression of the alcoholic liver injury. The increased serum level of ALT and AST induced by ethanol administration were decreased by SBU extract. Furthermore, SBU extract significantly decreased the liver concentrations of $TNF-{\alpha}$. Conclusions: SBU water extract attenuated the alcohol induced fatty liver by improving hepatic lipid metabolism via suppression of $TNF-{\alpha}$ protein. SBU could be effective in protecting the liver from alcoholic fatty liver.
Objective of this research was to secure the information on physical and chemical properties of peatmoss and coir dust. To achieve this, 6 kinds of peatmoss and 10 kinds of coir dust currently used in the country as the root medium components in plant factories were collected and analysed. The mean ${\pm}$ standard deviation (SD) of total porosity and container capacity in peatmoss and coir dust were $79.6{\pm}5.04$ and $83.6{\pm}6.18%$, and $69.9{\pm}10.17$ and $65.9{\pm}3.46%$, respectively. These indicate that peatmoss has higher water holding capacity than coir dust and the characteristics are highly varied among peatmoss. The 4 out of 5 kinds of peatmoss had lower than 10%, but coir dust had 12~26%, of air-filled porosity. The percentage of easily available water and buffering water in peatmoss and coir dust was 18~22 and 11~16% and 9~13 and 5.5~7.5%, respectively. These results indicate that precise irrigation is required when coir dust is used as the root medium. The ranges of pH and electrical conductivity (EC) were 3.46~4.17 and $0.137{\sim}0.253dS{\cdot}m^{-1}$ in peatmoss and 5.31~6.48 and $0.250{\sim}0.1.580dS{\cdot}m^{-1}$ in coir dust. However, $0.563{\pm}0.83dS{\cdot}m^{-1}$ in mean ${\pm}$SD of coir dust EC indicates that it is higher than that of peatmoss, and the coir dust are highly varied in EC. The cation exchange capacity of peatmoss was 3 to 4 times as high as that of coir dust. The coir dust had higher $NO_3$ and $PO_4$ and lower $NH_4$ than peatmoss. The K and Na concentrations in coir dust were extremely high indicating that these ions caused the rising in EC. The percentage of hot water and alkali extracts of peatmoss were 6.67~16.37 and 0~38%, whereas those of coir dust were 30.0~65.1 and 23.1~70.3%. These results mean that possible existence of growth inhibiting materials in coir dust.
Journal of the Korea Fashion and Costume Design Association
/
v.16
no.1
/
pp.117-123
/
2014
This paper examined dyeing using sulfur dye with nylon and the characteristics of high gauge knitting for generating high functionality including light weight, wind resistance and elasticity using fine nylon threads. Yarn tension, stitch field and knitting speed of high and fine gauge knitting were measured. The influence of reducing agents on sulfur dye, optimum dyeing conditions and fastness features in nylon dyeing were analyzed. The analysis results are presented below. When nylon (Hyoseong, 40d/34f) and spandex (Hyoseong, 20d) for use as hosiery yarn were used to knit high gauge and flat weave, 44 gauge, the effective knitting conditions were a stitch field over 8.2cm in 1 course length, yarn tension of less than 5g and knitting speed below 18rpm. Nylon dyeing using sulfur dye showed effective results when a rongalite reducing agent was used at more than 10% o.w.f. and dyeing was maintained at $98^{\circ}C$ for 30 minutes. For dyeing nylon and spandex composite using sulfur dye, color fastness in washing, water, daylight and friction were higher than Class 4 or 5, which indicated a superior property. The analysis results verified that the existing problems in nylon dyeing could be solved by using sulfur dyes that don't use heavy metals due to superior fastness and therefore quality, high gauge nylon knit products could be produced.
Alvarez, Vanessa Marques;Santos, Silvia Cristina Cunha dos;Casella, Renata da Costa;Vitae, RonaIt Leite;Sebastin, Gina Vazquez;Seldin, Lucy
Journal of Microbiology and Biotechnology
/
v.18
no.12
/
pp.1966-1974
/
2008
A typical tropical soil from the northeast of Brazil, where an important terrestrial oil field is located, was accidentally contaminated with a mixture of oil and saline production water. To study the bioremediation potential in this area, molecular methods based on PCR-DGGE were used to determine the diversity of the bacterial communities in bulk and in contaminated soils. Bacterial fingerprints revealed that the bacterial communities were affected by the presence of the mixture of oil and production water, and different profiles were observed when the contaminated soils were compared with the control. Halotolerant strains capable of degrading crude oil were also isolated from enrichment cultures obtained from the contaminated soil samples. Twenty-two strains showing these features were characterized genetically by amplified ribosomal DNA restriction analysis (ARDRA) and phenotypically by their colonial morphology and tolerance to high NaCl concentrations. Fifteen ARDRA groups were formed. Selected strains were analyzed by 16S rDNA sequencing, and Actinobacteria was identified as the main group found. Strains were also tested for their growth capability in the presence of different oil derivatives (hexane, dodecane, hexadecane, diesel, gasoline, toluene, naphthalene, o-xylene, and p-xylene) and different degradation profiles were observed. PCR products were obtained from 12 of the 15 ARDRA representatives when they were screened for the presence of the alkane hydroxylase gene (alkB). Members of the genera Rhodococcus and Gordonia were identified as predominant in the soil studied. These genera are usually implicated in oil degradation processes and, as such, the potential for bioremediation in this area can be considered as feasible.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.