• Journal of the Korean Wood Science and Technology
• /
• v.45 no.2
• /
• pp.147-158
• /
• 2017

Among the energy consumption in building, the heating energy takes the largest part. Therefore, it is important to minimize the heat energy loss in building for the reduction of overall energy use in construction. The most important points for the minimization of energy loss in building are insulation and airtightness. Especially, in wood houses, airtightness is very important for energy saving as well as increase of durability. However, the researches on airtightness of wood buildings have been started recently and are very deficient especially in Korea. In this study, air leakage properties and airtightness performance were evaluated for light-frame wood houses built in Daejeon and Chungnam area. Total 7 houses were evaluated, among which four houses (Case 1 to Case 4) were in the construction stage before interior finish and the other three houses (Case 5 to Case 7) were after completion of construction work. The tests for airtightness were conducted by pressurization-depressurization method, and the factors included in the measurements includes air leakage rate at 50 Pa (CMH50), air change rate at 50 Pa (ACH50), equivalent leakage area (EqLA) and EqLA per floor area. As a result of this study, key air leakage points in wood houses were found to be the gaps between floor and wall, the holes for wiring and plumbing, the double glasses windows and the entrance doors. The average value of ACH50 for the houses after completion of construction work was $3.5h^{-1}$ that was similar to Europe standard ($3.0h^{-1}$). ACH50 was proportional to EqLA per floor area but inversely proportional to the internal volume, the net floor area and the area of window.

• 한국노년학
• /
• v.32 no.2
• /
• pp.649-668
• /
• 2012

The purpose of this study ahead of the aging society in Korea to prevent problems of the elderly aged new addiction Internet Addiction and identify factors affecting the quantitative increase and qualitative improvement beyond that aims to promote. To this end, residents in Seoul over the age of 60's targets, local welfare, cultural centers, senior centers and other research in the area through one-on-one interviews were conducted the survey. Findings The average degree of Internet addiction elderly 36.16 points (SD = 10.02) and the distribution of at least 20 points to 65 points, respectively. Factors affecting the degree of Internet addiction as a computer time (β = .248, p <.001), mon allowance (β = .180, p <.01), age (β = .139, p <.01) and social support (β = .087, p <.05), self-efficacy (β = - .078, p <.05), most used location (β = - .116, p <.05), degree of family relationship (β = - .147, p <.01), housing type (β = - .153, p <.01), were of the order, this factor was 17.6% of the variance. In other words, the more computer time, the higher the age, the more mon allowance, housing is not self, the lower the degree of family relationship, the house is not a place most used, lower self-efficacy, social support is high As increasing the degree of Internet addiction was thought to be the two predictor variables. Survey results to target the elderly through the Internet addiction group psychotherapy program implementation, and production and distribution of manuals related to Internet use and addiction-related factors, according to the case-by-case Case management services are tailored to be done, and the Internet in general for seniors potential risks related to use in training and preventive services for the elderly will need to be made.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.32 no.1
• /
• pp.52-59
• /
• 2006

Purpose: The purpose of this study was to evaluate the influence of apical-coronal implant position on the stress distribution after occlusal and oblique loading. Materials and Methods: The cortical and cancellous bone was assumed to be isotropic, homogeneous, and linearly elastic. The implant was apposed to cortical bone in the crestal region and to cancellous bone for the remainder of the implant-bone interface. The cancellous core was surrounded by 2-mm-thick cortical bone. An axial load of 200 N was assumed and a 200-N oblique load was applied at a buccal inclination of 30 degrees to the center of the pontic and buccal cusps. The 3-D geometry modeled in Iron CAD was interfaced with ANSYS. Results: When only the stress in the bone was compared, the minimal principal stress at load Points A and B, with a axial load applied at 90 degrees or an oblique load applied at 30 degrees, for model 5. The von Mises stress in the screw of model 5 was minimal at Points A and B, for 90- and 30-degree loads. When the von Mises stress of the abutment screw was compared at Points A and B, and a 30-degree oblique load, the maximum principal stress was seen with model 2, while the minimum principal stress was with model 5. In the case of implant, the model that received maximum von Mises stress was model 1 with the load Point A and Point B, axial load applied in 90-degree, and oblique load applied in 30-degree. Discussion and Conclusions: These results suggests that implantation should be done at the supracrestal level only when necessary, since it results in higher stress than when implantation is done at or below the alveolar bone level. Within the limited this study, we recommend the use of supracrestal apical-coronal positioning in the case of clinical indications.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.83-88
• /
• 2006

Many applications in the area of location-based services and personal navigation require nowadays the location determination of a user not only in outdoor environment but also indoor. To locate a person or object in a building, systems that use either infrared, ultrasonic or radio signals, and visible light for optical tracking have been developed. The use of WiFi for location determination has the advantage that no transmitters or receivers have to be installed in the building like in the case of infrared and ultrasonic based location systems. WiFi positioning technology adopts IEEE802.11x standard, by observing the radio signals from access points installed inside a building. These access points can be found nowadays in our daily environment, e.g. in many office buildings, public spaces and in urban areas. The principle of operation of location determination using WiFi signals is based on the measurement of the signal strengths to the surrounding available access points at a mobile terminal (e.g. PDA, notebook PC). An estimate of the location of the terminal is then obtained on the basis of these measurements and a signal propagation model inside the building. The signal propagation model can be obtained using simulations or with prior calibration measurements at known locations in an offline phase. The most common location determination approach is based on signal propagation patterns, namely WiFi fingerprinting. In this paper the underlying technology is briefly reviewed followed by an investigation of two WiFi positioning systems. Testing of the system is performed in two localization test beds, one at the Vienna University of Technology and the second at the Hong Kong Polytechnic University. First test showed that the trajectory of a moving user could be obtained with a standard deviation of about ${\pm}$ 3 m.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.197-202
• /
• 2004

Recent researches have shown that IKONOS Geo imagery is capable of pixel-level geopositioning accuracy. However, a large number of ground control points(GCPs) are required in this case. For reducing the number of GCPs, users try to use the vender-supplied RPCs with Geo imagery. But, the biases included in RPCs give rise to absolute positioning error of about 25m as well known. In this paper, a method for the compensation of biases in rational polynomial coefficients(RPCs) for IKONOS Geo imagery is developed. the method requires provision of one or two GCPs to generate the compensated RPCs, and the analysis result of practical testing represents two or three pixels accuracy from IKONOS Geo imagery in case of using only compensated RPCs without GCPs.

• KIEAE Journal
• /
• v.11 no.1
• /
• pp.57-62
• /
• 2011

The study aims to analyze and evaluate the evaluation items and application methods of environment-friendly middle schools in Chungbuk area by case studies. For the study, the criteria and situations of environment-friendly schools are analyzed literally and three environment-friendly middle schools in Chungbuk area selected. The field surveys and faculty interviews are performed. As results, about 35 environment-friendly technologies are applied and 66 to 68 points are acquired in three selected schools. It is analyzed that the PV, natural interior materials, raining recycle system and sufficient green spaces are pointed out as main technologies. About 66% of respondents know the environment-friendly certification and use the environment facilities in classes. However, the unsuitable plants for interior green spaces, unskilled management of recycling facilities and the absent of student participate programs show up as main problems. Also, the active campaigns need to expand the environment-friendly school.

• KIEAE Journal
• /
• v.8 no.1
• /
• pp.61-70
• /
• 2008

This paper is focused on studying a pedestrian passage that forms exterior space of the housing unit on diverse prerequisites and convenience of residential environment regards to plans for Multi-family Housing Complex. The paper explores the actual usage of a pedestrian passage installed in Multi-family Housing Complex and examine whether the nature-friendly space that includes the exterior pedestrian passage of the housing unit is being applied variously on a pedestrian passage. In order to obtain an analysis of the current status on case study unit, the study has prepared an analyzing tool for the environment in use for the exterior pedestrian passage and was able to construction problematic points by applying the obtained data. Thanks for the analysis, a comprehensive evaluation on the plans for the pedestrian passage was implemented through correlation with a green tract of land, living space and the exterior pedestrian passage installed in Multi-family Housing Complex.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2001.10a
• /
• pp.363-366
• /
• 2001

It is very difficult to maintain the performance of estimation models for the new breed of projects since the computing environment changes so rapidly in terms of programming languages, development tools, and methodologies. So, we propose to use the relevant cases for a neural network model, whose cost is the decreased number of cases. To balance the relevance and data availability, the qualitative input factors are used as criteria of data classification. With the data sets that have the same value for certain qualitative input factors, we can eliminate the factors from the model making reduced neural network models. So we need to seek the optimally reduced neural network model among them. To find the optimally case-selective neural network, we propose the search techniques and sensitivity analysis between data points and search space.

• Journal of Oriental Neuropsychiatry
• /
• v.22 no.4
• /
• pp.111-124
• /
• 2011

Objectives : This case series was conducted to report the efficacy of Ondam-tanggami for insomnia. Methods : Insomnia patients with more than 15 points on Insomnia Severity Index scale were assessed using SCL-90-R, STAI, STAXI, BDI. Being treated with Ondam-tanggami after 2 weeks, ISI, STAI, STAXI, BDI were re-measured to determine the progress of insomnia. It is measured that total sleep time, number of awaking times during sleep, satisfaction of sleep daily. Results : After treatment, quality of sleep has improved and ISI, STAI, STAXI, BDI score have decreased. Conclusions : According to the study, treatment with Ondam-tanggami for insomnia has shown positive results. Further use of Ondam-tanggami is much anticipated for future treatment of insomnia cases.

• YAKHAK HOEJI
• /
• v.20 no.1
• /
• pp.32-36
• /
• 1976

The pH titration curves of ampicillin, amoxicillin and cephalexin in aqueous acetone, ethanol and N, N'-dimethylformamide by use of 0.02N-KOH solution showed that 80% acetone was the most effective solvent for alkali titration of them. The pH jumps of samples in 80% acetone were sharp enough to determine the contents of them by use in 80% acetone (9, 4) was coincided with each equivalent point of ampicillin, amoxicillin and cephalexin, but those of phenolphthalein, thymolphthalein, thymol blue and bgrom cresol purple were not. The color change of brom thymol blue at equivalent points was very clear except the case of amoxicillin that the determination of smaples in 80% acetone with 0.02 N-KOH solution by the aid of brom thymol blue could be available.