• Elastomers and Composites
• /
• v.53 no.2
• /
• pp.86-94
• /
• 2018

The effect of the NCO index and catalyst type on the thermal stability of poly(urethane-isocyanurate) (PUIR) foams was investigated to identify a method for enhancing the flame resistance of PUIR. PUIR foams were prepared using 4,4-diphenylmethane diisocyanate (MDI) and [(diethylene glycol)adipate]diol, which were synthesized by esterification of adipic acid and diethylene glycol. Dabco K-15, Dabco TMR-30, and Toyocat RX-5 were used as the catalysts for trimerization and gelation. The amount of urea and isocyanurate groups in PUIR was semi-quantitatively determined by normalizing their absorbance with the phenyl absorbance measured by FT-IR. The normalization data showed that Dabco TMR-30 effectively generated isocyanurate groups in PUIR. As a result, Dabco TMR-30 effectively raised the decomposition temperature and increased the 800 K and 900 K residues of the PUIR foam synthesized with an NCO index of 200.

• Archives of Pharmacal Research
• /
• v.11 no.1
• /
• pp.74-79
• /
• 1988

Crystals of tolazamide, $C_{14}H_{21}N_3O_3S$, are triclinic space group $P{\bar{1}}$ with cell dimensions of a = 6.355 (2), b = 9.223 (2), c = 13.510 (3) A, ${\alpha}\;=\;101.04\;(8),\;{\beta}=92.80(5),\;{\gamma}\;=\;85.72\;(6)^{\circ}$ and Z = 2. Intensities were collected on an automated four-circle diffractometer using graphite-monochromated Cu K ${\alpha}$ radiations. The structure was solved by direct method and refined by full-matrix least-squares to an R factor of 0.058 for 1184 observed reflections. The molecules are dimerized by the $N-H{\cdots}O$ hydrogen bonds. There are only van der Waals interactions between these molecular dimers.

• Bulletin of the Korean Chemical Society
• /
• v.31 no.4
• /
• pp.863-868
• /
• 2010

Yttrium(III) acetate hydrate-catalyzed novel synthesis of 3,4-dihydropyrimidin-2(1H)-(thio)one derivatives was achieved through one-pot three-component condensation of diversified aldehydes, $\beta$-ketoesters and urea or N-methylurea or thiourea with a molar ratio of 1:1:1.4. In comparison to the classical Biginelli approach, this catalytic method has the advantages of short reaction time and improved product yield.

• Bulletin of the Korean Chemical Society
• /
• v.30 no.12
• /
• pp.2887-2889
• /
• 2009

An efficient and easy method for one-pot three-component synthesis of amidoalkyl naphthols by the condensation of aromatic/heteroaromatic/aliphatic aldehydes, 2-naphthol and amides or urea under thermal condition at $60^{\circ}C$ in the presence of acidic ionic liquid 1-butyl-3-methylimidazolium hydrogen sulphate ([bmim]$HSO_4$) has been described.

• Bulletin of the Korean Chemical Society
• /
• v.29 no.9
• /
• pp.1752-1754
• /
• 2008

A simple and efficient synthesis of 3,4-dihydropyrimidinones or thiones is described, using silica-supported perchloric acid ($HClO_4-SiO_2$) as a heterogeneous catalyst from an aldehyde, $\beta$-dicarbonyl compound, and urea or thiourea under solvent-free conditions. Compared to the classical Biginelli reactions, this method consistently has the advantage of high yields, short reaction time, easy separation, and tolerance towards various functional groups.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.803-806
• /
• 2008

LEACHN is the computer simulation model which can be used to simulate field-scale N transformations and movement and has three organic pools (plant residue, manure, and soil humus), three inorganic pools (urea, nitrate and ammonium) and plant. Pot experiment operated May to October in 2004. LEACHN simulated the nitrogen movement and transformation in soil using method of PEST and trial and error.

• The Korean Journal of Gastroenterology
• /
• v.72 no.5
• /
• pp.229-236
• /
• 2018

Accurate diagnosis of Helicobacter pylori (H. pylori) infection is mandatory for the effective management of many gastroduodenal diseases. Currently, various diagnostic methods are available for detecting these infections, and the choice of method should take into account the clinical condition, accessibility, advantage, disadvantage, as well as cost-effectiveness. The diagnostic methods are divided into invasive (endoscopic-based) and non-invasive methods. Non-invasive methods included urea breath test, stool antigen test, serology, and molecular methods. Invasive methods included endoscopic imaging, rapid urease test, histology, culture, and molecular methods. In this article, we provide a review of the currently available options and recent advances of various diagnostic methods.

• Journal of ILASS-Korea
• /
• v.26 no.4
• /
• pp.163-170
• /
• 2021

Emergency generators normally use diesel engines. The generators need to conduct weekly no-load operation inspections to ensure stable performance at emergency situations. In particular, the generators with large diesel engines mainly use rectangle type filter substrates. In order to minimize hazardous emissions generated by generators, optimizing the reduction efficiency through CFD analysis of flow characteristics of PM/NO_X reduction system is important. In this study, we analyzed internal flow by CFD, which is difficult to confirm by experimental method. The main factors in our numerical study are the changes of flow uniformity and back pressure. Therefore, changes in flow characteristics were studied according to urea injector locations, selective catalyst reduction (SCR) diffuser angle, and filter porosity.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.26 no.6
• /
• pp.529-537
• /
• 1993

Several methods were examined for purification of docosahexaenoic acid (DHA, 22:6n-3) from skipjack Euthynnus pelamis orbital tissue oil, a marine by-product, and a modified method for isolation of a high purity DHA was proposed. Skipjack orbital tissue contained $55.4\%$ of total lipid(TL), and DHA accounted for $23.7\%$ of the TL. Application of low-temperature crystallization and urea inclusion compound methods to the orbital fatty acid mixture resulted in increases of DHA concentrations to approximately $46\%\;and\;61\%$, respectively. These methods were suitable for large production of DHA with relative low purity because of the simple purification procedure. DHA of approximately $74\%$ in purity was obtained by silver nitrate aqueous solution method, but the method gave a very low recovery($<10\%$). Silver nitrate-impregnated silica column chromatography was suitable for purification of a high purity DHA(purity, $>98\%$ and recovery, $>90\%$) A modified method, silver nitrate-impregnated silica column chromatography combined with low-temperature crystallization(two step purication method) was proposed as the most effective method to obtain DHA with high purity($99.9\%$) from the skipjack orbital oil.

• Transactions on Electrical and Electronic Materials
• /
• v.15 no.5
• /
• pp.249-252
• /
• 2014

The aim of this work is to investigate the effect of $Ca_xSr_{2-x}$ and activator on the structural and luminescent properties of green-emitting $Ca_xSr_{2-x}SiO_4:Eu^{2+}$ nano phosphor. Using urea as fuel and ammonium nitrate as oxidizer, $Ca_xSr_{2-x}SiO_4:Eu^{2+}$ has been successfully synthesized, using a combustion method. The particles were found to be small, spherical and of round surface. SEM imagery showed that the phosphors particles are of nanosize. The $Ca_xSr_{2-x}SiO_4:Eu^{2+}$ emission spectrum for 360 nm excitation showed a single band, with a peak at 490 nm, which is a green emission. The highest luminous intensity was at $1,000^{\circ}C$, which was obtained when the $Eu^{2+}$ content (y) was 0.05. The results support the application of $Ca_xSr_{2-x}SiO_4:Eu^{2+}$ phosphor as a fluorescent material for ultraviolet light-emitting diodes (UV-LEDs). Characteristics of the synthesized $Ca_xSr_{2-x}SiO_4:Eu^{2+}$ phosphor were investigated by means of X-ray diffraction (XRD), Scanning Electron Microscopy (SEM), and photoluminescence (PL) detection.