• Smart Structures and Systems
• /
• v.23 no.6
• /
• pp.669-682
• /
• 2019

Vibration mitigation of cables or hangers is one of the crucial problems for cable supported bridges. Previous research focused on the behaviors of cable with dampers or crossties, which could help engineering community apply these mitigation devices more efficiently. However, less studies are available for hybrid applied cross-ties and dampers, especially lack of both analytical and experimental verifications. This paper studied damping and frequency of two parallel identical cables with a connection cross-tie and an attached damper. The characteristic equation of system was derived based on transfer matrix method. The complex characteristic equation was numerically solved to find the solutions. Effects of non-dimensional spring stiffness and location on the maximum cable damping, the corresponding optimum damper constant and the corresponding frequency of lower vibration mode were further addressed. System with twin small-scale cables with a cross-link and a viscous damper were tested. The damping and frequency from the test were very close to the analytical ones. The two branches of solutions: in-phase modes and the out-of-phase modes, were identified; and the two branches of solutions were different for damping and frequency behaviors.

• Journal of the Korean Society of Industry Convergence
• /
• v.27 no.1
• /
• pp.77-86
• /
• 2024

Urban Air Mobility (UAM) is considered the future of transportation, offering solutions to urban challenges and reducing environmental issues through the use of electric power and leveraging the sky as a new transportation corridor. UAM has diverse applications, including passenger and goods transportation, emergency rescue operations, patient transfers, and urban tourism. Furthermore, it is poised to revolutionize the transportation landscape, impacting existing infrastructures such as roads and parking lots, along with autonomous vehicles. The UAM industry is anticipated to exert a significant impact on various sectors, including airframe manufacturing, the development of new materials (e.g., fuel cells and batteries), and even the defense industry, resulting in substantial economic benefits. Consequently, conducting proactive research and setting industry standards for UAM takeoff and landing infrastructure is crucial for securing market leadership. In this regard, the case of Pontoise-Cormeiles, France, stands out as it achieved the world's inaugural successful demonstration of a vertiport before the 2024 Olympics. This achievement has significant implications for our preparations for the commercialization of UAMs. Thus, a detailed review of the French vertiport construction case in this study will serve as a foundation for guiding the planning and operation of UAMs in South Korea, particularly in anticipation of upcoming demonstration tests.

• Advances in Computational Design
• /
• v.5 no.4
• /
• pp.381-396
• /
• 2020

This study aimed to develop an optimal model of transportation for people with disabilities. To achieve this goal, powers of research and design should be involved, including CAD software. This paper investigates both: the concept of optimal model of transportation for people with disabilities (functional, ergonomic, constructive, technological and aesthetic solutions included); and its implementation as a fully-fledged 3D-model designed in SolidWorks environment. The optimal model of transportation is complex and consists of two objects. The first object is for indoors that is a wheelchair, the second one is for street driving that is an individual vehicle. The optimal model of transportation is universal and multifunctional, which have become possible with parametric feature-based approach utilized in SolidWorks.

• Journal of Korean Society of Transportation
• /
• v.12 no.3
• /
• pp.29-47
• /
• 1994

Although subway system continues to be the backbone of transportation systems in a city like Seoul, there will still be areas across the city where subway services are not avaliable. Interest has steadily grown to fill this missing routes in overall urban transportation system. Light Rail Transit (L.R.T) system has been recently thought to be an appropriate mode of transportation by businessmen, professionals and transportation industry. In this regards, the purpose of this study is to explore whether L.R.T can be a feasible form of urban rail mode in the context of Seoul. First, the study develops the mathematical models to derive optimum route networks and stations. Integer Programming is employed to determine whether alternative routes are financially viable from the viewpoint of revenue maximization principles. Second, mathematical models developed are applied to Yoido area in order to examine the validity of model structures. The models constructed turns out be capable of handling alternative routes and stations. Application of models are successfully carried out to derive financially feasible set of routes and stations.

• Journal of Korean Society of Transportation
• /
• v.36 no.1
• /
• pp.23-37
• /
• 2018

In recent years, it is very difficult to construct and expand new infrastructures in a city center because of long-term low growth and lack of space due to urban overcrowding. So, there is a need to study a variety of Retrofitting techniques and urban applications that can lead to sustainable development while efficiently utilizing existing facilities. 'Retrofit' means a sustainable urban retrofitting as a directed alteration of the structures, formations and systems of existing facilities to improve energy, water and waste efficiencies. In this study, we applied a hierarchical network design technique that can reflect the structural hierarchy of a city to study how to retrofit public transportation routes in Seoul. The hierarchical network design means dividing the hierarchy according to the functions of hubs and connecting different hierarchies to form a hierarchical network. As a result of comparing the application results of various retrofitting scenarios of public transport, the differences of daily PKT and PHT by about 2.6~3.2% less than before the improvement address that the convenience of passengers is increased. Therefore, it is expected that if the route planning is established according to the proposed method, it will increase the number of passengers and the operational efficiency by the improved convenience of public transit passengers.

• Smart Media Journal
• /
• v.11 no.11
• /
• pp.49-62
• /
• 2022

Recently, with the development of Smart City Solutions such as Big data, AI, IoT, Autonomous driving, and Digital twins around the world, the proliferation of various smart devices and social media, and the record of the deeds that people have left everywhere, the construction of Smart Cities using the "Big Data" environment in which so much information and data is produced that it is impossible to gauge the scale is actively underway. The Purpose of this study is to construct an objective and systematic analysis Model based on Big Data to improve the transportation convenience of citizens and formulate efficient policies in Urban Information and Public Transportation accessibility in sustainable Smart Cities following the 4th Industrial Revolution. It is also to derive the methodology of developing a Big Data-Based public transport accessibility and policy management Platform using a sustainable Urban Public DB and a Private DB. To this end, Detailed Living Areas made a division and the accessibility of basic living amenities of Gwangju Metropolitan City, and the Public Transportation system based on Big Data were analyzed. As a result, it was Proposed to construct a Big Data-based Urban Information and Public Transportation accessibility Platform, such as 1) Using Big Data for public transportation network evaluation, 2) Supporting Transportation means/service decision-making based on Big Data, 3) Providing urban traffic network monitoring services, and 4) Analyzing parking demand sources and providing improvement measures.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.13 no.4
• /
• pp.95-108
• /
• 2013

The purpose of this study is to analyze and to grasp Peter Calthorpe's urbanism through the process that is compared with various developments of urban design field for the preservation of global environment. From this study, Peter Calthorpe's urbanism for global environment is comprehended according to design stages. As a design goal, He seeks a green urbanism that puts emphasis on land use and transportation. As a urban planning, he devises urban footprint for the tool of evaluation and urban planning, and proposes five place types toward mixed-use development, and advocates Transect for eco-friendly land use. As a urban design, he devises urban network model for transportation network based on accessibility, and devises TOD and TOC model for preventing urban sprawl and mitigating carbon emissions, and advocates TND model for pedestrian-friendly space and community life. He makes importance of urban design. Because he thinks that integrative solution is required to global environment and urban design of integrative characteristic is suitable to preserve global environment. The results of this study are summarized as the followings: First, type classification of urbanism for the preservation of global environment and grasping purposes, methods, characteristics according to the types. Second, grasping characteristics and location of Peter Calthorpe's urbanism as a green urbanism. Third, proposing the direction of improvement for our urban planning and design.

• Transportation Technology and Policy
• /
• v.8 no.1
• /
• pp.29-39
• /
• 2011

• Journal of environmental and Sanitary engineering
• /
• v.18 no.3 s.49
• /
• pp.11-20
• /
• 2003

There are two ways of reducing air pollution. One is the approach of the pollutant source control and the other one is the traffic demand decreasing approach. This study is focusing on the approach of land use planning and optimal location of urban facilities because those are the basic cause to generate transportation demands. So, the purpose of this study would be to analyze the changes of NOx and CO distribution on environmental air by functional hierarchy of urban roads and to make evaluation model of 'Transportation-Land Use -Air Pollution'. It will contribute to improve the air pollution level at same actual traffic generation according to different location.

• Journal of the Korea Safety Management & Science
• /
• v.12 no.3
• /
• pp.163-168
• /
• 2010

Recently, there are many problems of service qualities such as regular-rapid-safe -comfortable transport, that was traditionally advantages in urban railway transportations. These problems cause train delays that affects consecutive schedule, capacity, operation plans, and it is hard to prevent the propagation of delay and find the recovery solution. Because the urban transport demands is continuously increased and the railway service is also expanded, the railway operation company makes efforts to improve operation performance and efficiency for passengers. In this paper, we analyse the issues and problems existing in the major operation line of high-density urban railways, and suggest the development direction of intelligent operation technology to improve the urban railway service by minimizing the occurrence and propagation of delay. And the result of numerical case study is also presented.