• Journal of Wetlands Research
• /
• v.21 no.spc
• /
• pp.28-38
• /
• 2019

Climate change on the Korean peninsula is progressing faster than the global average. For example, typhoons, extreme rainfall, heavy snow, cold, and heatwave that are occurring frequently. North Korea is particularly vulnerable to climate change-related natural disasters such as flooding and flooding due to long-term food shortages, energy shortages, and reckless deforestation and development. In addition, North Korea is classified as an unmeasured area due to political and social influences, making it difficult to obtain sufficient hydrologic data for hydrological analysis. Also, as interest in climate change has increased, studies on climate change have been actively conducted on the Korean Peninsula in various repair facilities and disaster countermeasures, but there are no cases of research on North Korea. Therefore, this study selects watershed characteristic variables that are easy to acquire in order to apply localization model to North Korea where it is difficult to obtain observed hydrologic data and estimates parameters based on meteorological and topographical characteristics of 16 dam basins in South Korea. Was calculated. In addition, as a result of reviewing the applicability of the parameter estimation equations calculated for the fifty thousand, Gangneungnamdaecheon, Namgang dam, and Yeonggang basins, the applicability of the parameter estimation equations to North Korea was very high.

• Journal of Korea Water Resources Association
• /
• v.39 no.2 s.163
• /
• pp.139-150
• /
• 2006

In recent, increasing of the impervious area gives rise to short concentration time and high peak discharge comparing with natural watershed and it is a cause of urban flood damage. Therefore, we have performed for structural and non-structural plans to reduce the damage from inundation. The Gulpo-cheon basin had been frequently inundated and damaged due to the water level of Han river. So, the Gulpo-cheon floodway was constructed with 20 meters width for flood control in the basin but it was not enough for our expectation and now we have a plan to expand the floodway to 80 meters. We use a XP-SWMM model developed based on EPA-SWMM version for analyzing the capacity of flood conveyance by the expansion of Gulpo-cheon floodway with the same 100 years return period design storm and the same tidal conditions of the Yellow sea. The flood conveyance after the expansion of floodway becomes three times comparing it with before the expansion. Also we simulate the flood discharge at the diversion point of Gulpo-cheon for the expanded condition of floodway and know that the discharge of about 300 m3/sec is flowing backward to the expanded floodway. Therefore we may need some kinds of hydraulic structures to prevent the back water.

• Journal of Korea Water Resources Association
• /
• v.50 no.3
• /
• pp.169-179
• /
• 2017

Recently, due to global warming and climate change in Korea, local heavy storm occurs frequently. In this study, the risky areas for flooding in urban areas are analyzed for flood inundation based on two-dimensional urban flood runoff model (XP-SWMM) focusing on coastal high flood-risk urban areas. In addition, the MCDM (Multi-Criteria Decision Making) technique is utilized in order to establish the flood defense structural measures. The alternative flood reduction method are compared and the optimum flood defense measures are selected. A simulation model was used with three structural flood prevention measures (drainage pipe construction, water detention, flood pumping station). In order to decrease the flooding area, flood assessment criteria are suggested (flooded area, maximum inundation depth, damaged residential area, construction cost). Priorities of alternatives are determined by using compromise programming. As a result, the optimal flood defence alternative suggested for Janghang Zone 1 is flood pumping station and for Janghang Zone 2, 3 are drainage pipe construction.

• 한국방재학회:학술대회논문집
• /
• 2008.02a
• /
• pp.755-758
• /
• 2008

Currently, the increased run-off and the shortened arrival time are one of the causes of the city environmental disasters in urbanization. Therefore, it is necessary to properly design the hydrologic structures, but it is very difficult to forecast the values necessary to design from the planning stage. Moreover, as the parameter is changed due to the urban development, it is difficult not only to analyze the run-off influences but also to find the related studies and literatures. The purpose of this study is to utilize the results as the important basic data of the hydrologic structures, its proper design and run-off influences through the sensibility analysis of the model parameter variables. In this study, the absolute and relative sensibility analysis method were used to find out the correlation through the sensibility analysis of the topology and hydrology parameters. Especially, in this study, the changes in the run-off amount and volume were calculated according to increase/decrease in CN, the coefficient of discharge, and the empirical formula is prepared and proposed through the regressive analysis among the parameters. In the meantime, the parameter sensibility analysis was performed through the simulation HEC-HMS that is used and available in Korea. From the results of this study, it was found that the run-off amount is increased about by 10% when the CN value is increased by 5% before and after the development through the HEC-HMS simulation and data analysis. As long as there will be additional data collection analysis and result verification, and continuous further studies to find out the parameters proper to the domestic circumstances, it is expected to considerably contribute to the proper design of the hydrologic structures with respect to the ungauged basin.

• Journal of Korean Society on Water Environment
• /
• v.27 no.5
• /
• pp.670-679
• /
• 2011

Chlorophyll-a is a major water quality indicator for an algal bloom in streams and lakes. The purpose of the study is to estimate chlorophyll-a concentration in tributaries of the Seonakdonggang by an artificial neural network (ANN). As the tributaries are ungauged streams, a watershed runoff and quality model was used to simulate water quality parameters. The tributary watersheds include urban area and thus Storm Water Management Model (SWMM) was used to simulate TN, TP, BOD, COD, and SS. SWMM, however, can not simulate chlorophyll-a. The chlorophyll-a series data from the tributaries were estimated by the ANN and the simulation results of water quality parameters using SWMM. An assumption used is as follows: the relation between water quality parameters and chlorophyll-a in the tributaries of the Seonakdonggang would be similar to that in the mainstream of the Seonakdonggang. On the assumption, the measurement data of water quality and chlorophyll-a in the mainstream of the Seonakdonggang were used as the learning data of the ANN. Through the sensitivity analysis, the learning data combination of water quality parameters was determined. Finally, chlorophyll-a series were estimated for tributaries of the Seonakdonggang by the ANN and TN, TP, BOD, COD, and temperature data from those streams. The relative errors between the estimated and measured chlorophyll-a were approximately 40 ~ 50%. Though the errors are somewhat large, the estimation process for chlorophyll-a may be useful in ungauged streams.

• Journal of Korean Society of Disaster and Security
• /
• v.14 no.2
• /
• pp.13-23
• /
• 2021

This study intended to assess the reliability of topographic data using satellite imaging data. The topographical data using actual instrumentation data and satellite image data were established and applied to the rainfall-leak model, S-RAT, and the topographical data and outflow data were compared and analyzed. The actual measurement data were collected from the Water Resources Management Information System (WAMIS), and satellite image data were collected from MODIS observation sensors mounted on Terra satellites. The areas subject to analysis were selected for two rivers with more than 80% mountainous areas in the Han River basin and one river basin with more than 7% urban areas. According to the analysis, the difference between instrumentation data and satellite image data was up to 50% for peak floods and up to 17% for flood totals in rivers with high mountains, but up to 13% for peak floods and up to 4% for flood totals. The biggest difference in the video data is Landuse, which shows that MODIS satellite images tend to be recognized as cities up to 60% or more in urban streams compared to WAMIS instrumentation data, but MODIS satellite images are found to be less than 5% error in forest areas.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.6D
• /
• pp.1019-1023
• /
• 2006

The slope information based on DEM is very useful for urban planning, landscape, road design and water resource areas such as rainfall-runoff and soil erosion estimation. The resolution of slope, which is from DEM, can be variously decided by an application fields and the kinds of modeling method. In particular, the more decreased resolution makes the more decreased slope value because of the increased horizontal distance. This study presents slope evaluation method by aggregation method based on discharge and Manning's velocity equation to advance the loss of slope information in according to the resolution, and then applied it to calculate topographic factors of soil erosion model. As a result, conventional method shows 34.8% errors but aggregation method shows 12.6% errors. This study selected up-, middle-, and downstream region in watershed and analyzed the capability of aggregation method in order to estimate the influence of topographic characteristics. As a result of estimation, aggregation method shows more advanced results than conventional method. Therefore, the slope evaluation method by aggregation method can improve efficiently the loss of slope information in according to the variation of resolution in water resource area such as rainfall-runoff model.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.38-38
• /
• 2017

본 연구는 내수침수에 의한 침수면적 예측을 위한 강우특성과 1차원 유출모형의 유출특성 및 월류특성 자료를 이용한 침수면적의 정확도를 다양한 호우사상을 적용하여 분석하였다. 국내에서 침수 취약지역 예측을 위해서 강우-유출모형의 유출량 예측 즉 홍수추적을 중심으로 이루어지고 있는 실정이다. 기존 모형이 홍수추적을 중심으로 이루어진 것은 대유역의 경우에 XP-SWMM 모형과 같은 정밀모형을 이용할 경우 긴 모의시간으로 인하여 예경보 발령을 위한 골든타임 확보가 어려우며, 홍수량 예측을 통하여 예측된 침수피해에 대한 정밀도 확보가 어렵기 때문에 실제 상황에 적용하기 어려운 문제점이 발생하고 있다. 컴퓨터 하드웨어의 발전에 따른 연산속도의 증가와 빅데이터 처리기술을 발전에 따라서 10년 전과 비교하여 2차원 침수면적 예측시간이 단축되기는 하였지만, 실제 침수면적 예측에 적용하기는 어려운 실정이다. 따라서, 모의시간이 짧은 1차원 강우-유출모형, 1차원 도시유출모형을 이용한 침수면적 예측방법에 대하여 연구하였다. 홍수피해 예측을 위하여 다양한 수문학적 인자의 영향 분석을 위해서 XP-SWMM 모형의 다양한 형태의 강우입력자료에 따른 1차원 유출 모의결과와 2차원 지표류 모의결과를 이용하여, 2차원 침수면적 예측결과를 추정하기 위한 수문학적 인자의 적용방법에 대하여 분석하였다. 모의시간이 짧은 강우-유출모형과 1차원 도시유출모형을 이용하여 도출한 수문학적 인자를 이용한 침수면적의 추정방법을 분석을 비교분석함으로써 침수면적 예측 시스템 구축방안에 대하여 구체적인 수문학적 인자들 생성을 위한 단계적 모형 적용방안 수립을 위한 자료로 활용할 수 있을 것이다.

• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.519-528
• /
• 2016

Frequently torrential rain is occurred by climate change and urbanization. Urban is formed with road, residential and underground area. Without detailed topographic flooded analysis consideration can take a result which are wrong flooded depth and flooded area. Especially, flood analysis error of population and assets in dense downtown is causing a big problem for establishments and disaster response of flood measures. It can lead to casualties and property damage. Urban flood analysis is divided into sewer flow analysis and surface inundation analysis. Accuracy is very important point of these analysis. In this study, to confirm the effects of the elevation data precision in the process of flooded analysis were studied using 10m DEM, LiDAR data and 1:1,000 digital map. Study area is Dorim-stream basin in the Darim drainage basin, Sinrim 3 drainage basin, Sinrim 4 drainage basin. Flooding simulation through 2010's heavy rain by using XP-SWMM. Result, from 10m DEM, shows wrong flood depth which is more than 1m. In particular, some of the overflow manhole is not seen occurrence. Accordingly, detailed surface data is very important factor and it should be very careful when using the 10m DEM.

• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.11
• /
• pp.1007-1018
• /
• 2009

Hydrocyclone is widely used in industry, because of its simplicity in design, high capacity, low maintenance and operational cost. The separation action of a hydrocyclone treating particulate slurry is a consequence of the swirling flow that produces a centrifugal force on the fluid and suspended particles. In spite of hydrocyclone have many advantage, the application for treatment of urban stormwater case study were rare. We conducted a laboratory scale study on treatable potential of micro particles using hydrocyclone filter (HCF) that was a combined modified hydrocyclone with perlite filter cartridge. Since it was not easy to use actual storm water in the scaled-down hydraulic model investigations, it was necessary to reproduce ranges of particles sizes with synthetic materials. The synthesized storm runoff was made with water and addition of particles; ion exchange resin, road sediment, commercial area manhole sediment, and silica gel particles. Experimental studies have been carried out about the particle separation performance of HCF-open system and HCF-closed system. The principal structural differences of these HCFs are underflow zone structure and vortex finder. HCF was made of acryl resin with 120 mm of diameter hydrocyclone and 250 mm of diameter filter chamber and overall height of 800 mm. To determine the removal efficiency for various influent concentrations of suspended solids (SS) and chemical oxygen demand (COD), tests were performed with different operational conditions. The operated maximum of surface loading rate was about 700 $m^3/m^2$/day for HCF-open system, and 1,200 $m^3/m^2$/day for HCF-closed system. It was found that particle removal efficiency for the HCF-closed system is better than the HCF-open system under same surface loading rate. Results showed that SS removal efficiency with the HCF-closed system improved by about 8~20% compared with HCF-open system. The average removal efficiency difference for HCF-closed system between measurement and CFD particle tracking simulation was about 4%.