• Journal of Korean Society of Transportation
• /
• v.29 no.3
• /
• pp.93-101
• /
• 2011

In 2008, Korea has observed total 215,822traffic accidents Although the number has decreased since then, the crash rate is still higher than those of other advanced countries. In particular, high rate of pedestrian accidents occurred on urban streets is recognized as a serious problem. The previous studies, however, are not entirely considerate of accident factors by accident type. Inspired by the fact, this study analyzes factors affecting traffic accident by accident type. Using the accident data collected on urban streets in Seodaemun-gu, this paper classifies the accidents into two groups (i.e., vehicle-vs-vehicle and vehicle-vs-person crashes), and analyzes relationships between severity and exogenous variables. For the analysis, Structural Equation Modeling (SEM) is employed to estimate relationships among exogenous factors of traffic accident by each type on urban streets. The resulting model reveals that roadway related factors are highly correlated with the severity of vehicle-vs-vehicle crashes whereas environment factors are with vehicle-vs-person crashes.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.3
• /
• pp.1131-1142
• /
• 2013

This study aims to verify the applicability of TRANSIMS (TRansportion ANalysis SIMulation System) in interrupted traffic flow through calibration and validation process based on observation data; such as headway, traffic volume, speed, and travel time from Dalguberl Boulevard in Dae-gu metropolitan city. On this study, several micro-simulation parameters are derived from the calibration and validation process through performing a headway comparison and applying an ID back tracking methodology. As a result, it is figured out that actual circumstances of Korean roadway; for example, traffic volume per lane, speed, and travel time, can be applied on the TRANSIMS. Especially, it was possible to find out the influence of cell size parameter to traffic flow characteristic of simulation. However, it is hard to conclude that TRANSIMS is applicable to Korean roadway environment with studying particular target area. Therefore, additional studies; such as more case studies with various types of road, signal, and land use, will be required to localize TRANSIMS to Korea.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1460-1463
• /
• 2005

In this paper, analysis of magnetic marker for autonomous vehicle guidance system using 3-axis magnetic sensor propose. Position sensing is an important an estimation system of vehicle position and orientation on magnetic lane, which is a parameter of the steering controller for automated lane following is described. To verify that the magnetic dipole model could be applied to a magnetic unit paved in roadway, the analysis of the data 3-axis magnetic field measured experimentally.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.3
• /
• pp.73-79
• /
• 2009

Driving is a complex psychomotor task often interrupted by secondary activities that increase cognitive workload and divert attention away from the roadway. The risk of inattentive driving is known to vary with age. To assess the characteristics of advancing age on driver's cognitive workload under dual task condition, we evaluate the performance of 96 drivers divided into three age groups: 20's, 40's, and 60's. This study considers driver's cognitive workload in the context of urban and highway driving. Error rate & Dual task cost are used to measure driver's cognitive workload. Results indicate that age impacts cognitive workload during dual task driving conditions.

• Structural Engineering and Mechanics
• /
• v.43 no.1
• /
• pp.71-87
• /
• 2012

This paper extends a single equation, semi-analytical approach for three-span bridges to multi-span ones for the rapid and precise determination of natural frequencies and natural mode shapes of an orthotropic, multi-span plate. This method can be used to study the dynamic interaction between bridges and vehicles. It is based on the modal superposition method taking into account intermodal coupling to determine natural frequencies and mode shapes of a bridge deck. In this paper, a four- and a five-span orthotropic roadway bridge deck are compared in the first 10 modes with a finite element method analysis using ANSYS software. This simplified implementation matches numerical modeling within 2% in all cases. This paper verifies that applicability of a single formula approach as a simpler alternative to finite element modeling.

• Proceedings of the KOR-KST Conference
• /
• 1998.09a
• /
• pp.141-151
• /
• 1998

Provision of Passing Sight Distance (PSD) is an important component in two-lane highway design and has a critical impact on capacity of highway and safety of drivers. Many models have been developed to estimate PSD reasonably. However, each of them has a number of shortcomings for reflecting the real traffic conditions. This paper introduces a revised model that reflects the characteristics of the passing maneuver. The changes in passing sight distances under different assumptions about acceleration and vehicle length, which are related to vehicle types, are presented. The results obtained by the revised model are compared with those obtained from the existing models. There is an important link between geometric design decisions which determine the available sight distance and the quality of service which the road provides. In this paper, we examine one aspect of this relationship. That is to determine whether the passing sight distance is provided by improving horizontal alignment for a specific roadway section or passing may be restricted to save the road construction cost. To do so, a simple method for estimating traffic delay in no-passing is introduced.

• Journal of Korean Society of Transportation
• /
• v.25 no.5
• /
• pp.101-109
• /
• 2007

Two variations of toll roads exist: mainline toll plazas and entry/exit tolls. On a mainline toll system(open toll scheme), all vehicles stop at various locations along the highway to pay a toll. While this may save money from the lack of need to construct tolls at every exit, it can cause lots of traffic congestion, and drivers could evade tolls by going around them. With entry/exit tolls, vehicles collect a ticket when entering the highway, which displays the fares it will pay when it exits, increasing in cost for distance travelled. Upon exit, the driver will pay the amount listed for the given exit. The pressures on the Seoul ring roadway network have been changing over time. In the past, the emphasis was on mobility and maintenance of the road network to provide an efficient transportation network, but recently, road use has outstripped the network's ability to extend and expand the road network and hence the policy emphasis has moved towards reducing free riders rather than mitigating its effects. In addition to this pressure is an incidental pressure, which argues that provision of free ride segments generates further traffic in isolation of other factors. This paper is examining policies to reduce the burden of traffic congestion in Seoul ring roadway which is used open toll scheme for decades. One key mechanism to achieve this policy aim is automatic charging mechanism on freeway, but if a nation-wide electronic toll collection is to be implemented successfully, there are a number of prerequisites which must be place.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.24 no.5
• /
• pp.69-76
• /
• 2020

Global warming is a very important problem as it causes rapid climate change and natural disasters. Therefore, researches related to renewable energy are being actively conducted while promoting policies such as reducing carbon dioxide emission and increasing the proportion of renewable energy. Solar power generation is being applied in urban areas like BIPV as well as existing idle areas outside the city. Therefore, in this study, precast concrete blocks developed for paving roadways capable of solar power generation were designed and constructed. For the evaluation of field applicability for 6 months, skid resistance and block settlement were measured. As a result of the experiment, it was found that skid resistance satisfies the standard of general roadway in Korea, but not the standard of highway. The skid resistance tended to decrease as time passed. In addition, the settlement of the block gradually increased slightly, but it is much smaller than the allowable settlement of the roadway. Therefore, it is necessary to establish a maintenance period and method based on the periodic measurement results in the future.

• Journal of Korea Water Resources Association
• /
• v.40 no.3
• /
• pp.223-236
• /
• 2007

Recently in urban area flood damages increase due to local concentrated heavy rainfall. Even in the cities where stormwater drainage systems are relatively well established flood damage still occurs because of the capacity limitations of the existing stormwater drainage systems. When the flood exceeds the capacity limitation of the urban storm sewer system, it yields huge property losses of public facilities involving roadway inundation to paralyze industrial and transportation system of the city. To prevent such flood damages in urban area, it is necessary to develop adequate inundation analysis model which can consider complicated geometry of urban area and artificial drainage system simultaneously. The Dual-Drainage model used in this study is the urban inundation analysis model which combines SWMM with DEM based 2-dimensional surface flood inundation model. In this study, the dual drainage model has been modified to consider the effect of complex buildings in urban area. Through the simulation of time variable inundation process, it is possible to identify inundation alert locations as well as to establish emergency action plan for the residencial area vulnerable to flood inundation.

• International Journal of Highway Engineering
• /
• v.17 no.1
• /
• pp.91-98
• /
• 2015

PURPOSES : Although signalized intersections have been considered the best way to control traffic volume in urban areas for several decades, roundabouts are currently being discussed as an alternative way to control traffic volume, especially when traffic is light. Because a roundabout's efficiency depends on the load geometry as well as the traffic volume, design guidelines for roundabouts are recommended only if the incoming traffic volume is very low. It is rare to substitute a roundabout for an existing signalized intersection in urban areas. This study aims to estimate the benefits from the transformation of an existing signalized intersection into a roundabout in an urban area. When there is a more moderate volume of traffic, roundabouts can be effectively used by optimizing signals located at an approaching roadway. METHODS : The methodologies of this paper are as follows: First, a signalized intersection was analyzed to determine the traffic characteristics. Second, the signalized intersection was transformed into a roundabout using VISSIM microscopic traffic simulation. Then, we estimated and analyzed the effects and the performance of the roundabout. In addition, we adjusted a method to improve the benefits of the transformation via the optimization of signals located at an approaching road to control the incoming traffic volume. RESULTS : The results of this research are as follows: The signal-optimized roundabout improved delays compared with the signalized intersection during the morning peak hour, non-peak hour, and evening peak hour by 1.78%, 12.45%, and 12.72%, respectively. CONCLUSIONS : According to the simulation results of each scenarios, the signal-optimized roundabout had less delay time than the signalized intersection. If optimized signal control algorithms are installed in roundabouts in the future, this will lead to more efficient traffic management.