• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.62 no.9
• /
• pp.1324-1328
• /
• 2013

The reason of train location detection is generally the train interval control between the railway stations and the train path control in the railway station yard in order to avoid train collision. It is very important to know the train location for shortening the train headway, and improving the efficiency of railway maintenance as well as the safe operation of trains. Therefore, the accurate detection of train location is the prerequisite technology in railway signalling system. The track circuit and the wheel sensor of rolling stock have been used to detect the train location widely in urban railway as well as high speed train. The track circuit is continuously monitored by electrical equipment to detect the absence of the train and the tachometer and encoder is used for the wheel sensor to measure the train speed. But speed sensor failures are frequent due to the extremely harsh operating conditions encountered in rail vehicle. The CBTC(Communication based Train Control) system has been used in urban railway system recently. But the installation of CBTC system is very high and the modification of design is difficult. This paper deals with the feasibility of new train location detection method using magnetic sensors.

• Journal of the Korean Society for Railway
• /
• v.16 no.6
• /
• pp.447-453
• /
• 2013

Since PSDs(Platform Screen Doors) are set up at many subway stations, their design related to safety has become gradually important. In particular, the interference check with a running railway vehicle is the most important of performance indices because the collision between PSDs and vehicles can be dangerous for passengers in the car and on platforms. When the train comes into a station with a curvature, the passenger car has a large translational and rotational motion and the displacement is enough for coming in contact with PSD. The performance is affected by many design parameters such as rail design parameters and vehicle velocity. This study proposes dynamic analysis models for railway vehicles and rails. Some parameters were also considered in the models to determine their influence on the performance.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.5
• /
• pp.3499-3510
• /
• 2015

To cope with the increased demand on the intra-city transportation by urban rails, the introduction of the light rail transit (LRT) systems has been expedited in Korea due to the possible reduction of both the development and operation costs from adopting LRT systems. The LRT systems have so far been designed, constructed and operated based on the corresponding law and regulations. It has been conceived that fully complying with the existing guidelines may incur some extra costs on LRT. In addition, the present design of LRT stations seems to require unnecessarily long flow of passengers traffic, particularly for disabled people. In this paper, as an approach to solving the aforementioned issues, an introduction of 'LRT stops' has been studied where the stops are similar in concept to bus stops and are intended to replace the stations of a bigger scale in general. Specifically, necessary guidelines for design have been developed by modifying the existing ones to be fit with LRT stops. A design case was also presented to evaluate them. The effective use of the results reported here will provide an opportunity of cost reduction in connection with the construction and operation, and also let people benefit from convenient use of rails, thereby resulting in enhanced transportation welfare.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.1
• /
• pp.112-123
• /
• 2011

This study focused on developing strategies of cyber-compact city, combining compact city with information and communications technologies(ICTs), in order to enhance sustainable transportation. The cyber-compact city development is defined as a development that is able to reduce travel by ICTs and encourage people to use transit or non-motorized vehicles such as bicycles for ICT-induced travel (especially, discretionary travel) by compact and mixed land use. It can be achieved with combining cyber and compact strategies with respect to network, node, and area. For example, ICT network may use transit network facility, a transfer station may be a hub of ICTs, and transit influenced zone may work with ICT service area. We proposed three cohesive strategies for the cyber-compact city based on literature review and case studies on cyber and compact cities. The first strategy is a cohesion between public transportation and telecommunication network by centering on the two for national and urban spatial linkage structure. That is, cities or urban centers and its peripheral areas can be connected by rail network, and extra space of railway network can be used for constructing telecommunication network infrastructure. The second strategy is a cohesion between public transportation node and telecommunication node by building up regional and urban telecommunication centers near to or at main railway stations. For this strategy, telework centers and communication service centers should be established mainly at transfer stations. The third strategy is a cohesion between public transportation impact zone and telecommunication impact zone as transit oriented development.

• Land and Housing Review
• /
• v.4 no.2
• /
• pp.167-176
• /
• 2013

The City Complex Development and TOD originated from the Compact City are entrenched domestically. The New Urban Development such as these changes Structure of Urban space from the Automobile to the Public Transportation. Also, Transit-Oriented Development is drawing attention as sustainability because it has effects of Environment as Green growth. However, An empirical Study is insufficient about Influence Factors of Transit Oriented Development. Therefore This study sets up the Density spaced 1000m apart of Transit Oriented than the existing and did 7 Types considered of Accessibility, Complexity and Design Element according to the Factorial analysis. As a result, this study drew that (1) 'intraregional accessibility of public transit', (2) 'degree of development', 'pedestrian-friendly facility', (3) 'interzonal accessibility of public transit', (4) 'land-use of the city centre', 'complex using of rail station area', 'complementary public transit' are related 201 in number of the Subway stations according to the Multi-dimensional scaling.

• Journal of the Korean association of regional geographers
• /
• v.12 no.1
• /
• pp.59-71
• /
• 2006

The purpose of this study is to explain the regional transformation in the lowest level administration district(Myeon). The major factor of regional transformation is the change of geographical range, identity of place name, the formation and change of regional center. Jo-Chon Myeon as a sample study region is located in near Jeon-Ju city. The large and dynamic city in neighbor is strong influenced to the change of geographical range. But the place name has Identity in spite of the regional change. The formation of new regional center is influenced by new road, rail road and station, japanese large farm, administration office in this district.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.12
• /
• pp.187-196
• /
• 2014

In this paper, Minimize driving energy for operation within a defined distance yeokgan fixed time-resolved and determine the nature of the train is traveling, and to model mathematically. Urban rail car cruise in general by the PID controller is used instead of automatically tracking a target value while traveling in energy consumption to be minimized by using optimal control model railroad charyangreul was designed under real operating conditions the same. The actual track conditions apply to the minimum value or a separate listing of cars around the track facility without a driving energy of the automatic operation and to reduce the driving energy. Therefore, actual route chosen straight line 8 / gradient segment / curve for the measured data analysis, such as sections within the city-minute drive each section and presented how the trains to save energy, depending on the pattern of the train station in the region.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.273-286
• /
• 2013

Recently, due to problems with subway and bus operations, a need has emerged for a solution such as the introduction of an Advanced Transit System. In several municipalities, systems have been introduced using light rail as AGT urban aesthetics construction. There is high inhibition and civil cases are delayed by more environmentally friendly and accessible remedies. For the purpose of this study, Changwon city would be transformed to have an environmentally friendly transportation system such as a tram with an overview. Features, advantages, and disadvantages are analyzed, and systems are established the existing public transport routes by transfer system. Changwon city's tram plan is first step in open in year 2018, and second step with the opening goal of the year 2021, and the total line length of 33.9 km, the station will be built in the 38 locations. and also in 2011 a feasibility study, evaluated a low economic as B/C to 0.88, but it evaluated the high value of the policy analysis as AHP to 0.502. However, introduction of a tram project that should precede the as following condition. The first step in Changwon city's tram plan would be as follows : The introduction of the tram system would demand traffic management along with a restructuring of the bus system, and the tram system would be selected for domestic realities. Secondly, the introduction of trams would comprehend the advanced traffic composition in accordance with the consensus of the citizenship, and a legal system should be established for the introduction of the trams.