• 한국통신학회논문지
• /
• 제32권5B호
• /
• pp.257-269
• /
• 2007

네트워크 계층의 MANET 라우팅 프로토콜이 개발될 때 가장 주요한 관심사는 라우팅 오버헤드 (Overhead)의 축소이다. 본 논문에서는 MANET 에서 단일 노드가 자동 네크워킹 프로토콜에 의해 IP 주소를 획득할 때의 라우팅 오버헤드 (메시지 복잡도)를 정량적으로 분석하는 수학적 방법을 제안한다. MANET에서 자동 네크워킹 프로토콜은 IP 주소 할당시 IP 주소 충돌회피에 사용된다. 메시지 복잡도는 Upper Bound에 의해 수학적으로 정량화 되고, 실제 주소 할당을 컴퓨터 시뮬레이터로 구현하여, 제안된 Upper Bound와 시뮬레이션 결과를 비교, 분석한다. 메시지 복잡도의 Upper Bound는 Worst Case 시나리오 분석에 의해 유도된다.

• Geomechanics and Engineering
• /
• 제34권4호
• /
• pp.381-396
• /
• 2023

The present paper evaluates seismic bearing capacity of rock masses subjected to loads of strip footings using the upper bound method. A general formula was proposed to evaluate the seismic bearing capacity considering both the horizontal and vertical accelerations of the earthquake and the effects of footing embedment depth simultaneously. Modified Hoek-Brown failure criterion was employed for the rock mass. Some comparisons were made with the available solutions and the finite element numerical models to show the accuracy of the developed upper bound formulations. The obtained results show significant improvement compared to the other available solutions. By increasing the horizontal earthquake acceleration from 0.1 to 0.3, the bearing capacity was reduced by up to 39%, while the effect of the vertical earthquake acceleration depends on its direction. An upward acceleration in the range of zero to 0.2 results in an increase in the bearing capacity by up to 24%, while the downward earthquake acceleration has an adverse effect. Also, by increasing the embedment depth of the footing from zero to 5 times the footing width, the value of seismic bearing capacity was raised about 86%. The obtained results were presented as design tables for use in practical applications.

• 대한전기학회논문지
• /
• 제43권5호
• /
• pp.827-837
• /
• 1994

This paper presents robustness propertis of the Kalman Fiter and the associated LQG/LTR method for linear time-invariant output-delayed systems. It is shown that, even for minimum phase plants, the LQG/LTR method can not recover the target loop transfer function. Instead, an upper bound on the recovery error is obtained using an upper bound of the solution of the Kalman filter Riccati equations. Finally, some dual properties between output-delayed systems and input-delayed systems are exploited.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1998년도 춘계학술대회논문집
• /
• pp.214-219
• /
• 1998

Analytic and experimental methods have been used for the characterization of flow behavior of semi-solid Al2024 alloy. Backward extrusion experimnet was chosen to avoid the crack on the unconstrained surface. The material constants for the flow stress by the upper bound technique that agreed with experimental results were determined. The various material constants obtained for al temperature range above the solidus temperature have been fitted and represented in the function of temperature and solid fraction. The obtained result has good agreement only in the high solid fraction.

• 한국정밀공학회지
• /
• 제13권1호
• /
• pp.108-115
• /
• 1996

Forging of trapezoidal spline, serration and square spline with solid cylindrical billets and hollow one has been investigated by means of upper bound method. Kinematically admissible velocity fields for forging of splines have been proposed in this study. The half pitch of spline has been divided into several deformation regions. The neutral surface is introduced into forging of splines with flat punch and, for each step, it is assumed as a circle with its radius $r_n$. Upper bound solutions obtained by proposed kinematically admissible velocity fields are useful to predict the loads for forging of splines.

• 한국군사과학기술학회지
• /
• 제3권2호
• /
• pp.35-41
• /
• 2000

A modified theoretical analysis of the ballistic perforation on the double and multi-layered armour plates using an upper bound method has been presented in this paper. A modified model based on the suggestion of the Awerbuch-bodner model has been adapted and extended into double and multi-layered armour plates when the plugging type of penetration has been occurred. The residual projectile speed, ballistic limit velocity and contact time during the penetration process have been derived from the equation of motion at each stage.

• 대한기계학회논문집
• /
• 제13권3호
• /
• pp.330-336
• /
• 1989

본 연구에서는 상계해법을 이용하여 축대칭 후방압출에 있어서 압출하중뿐 아니라 소성변형역의 형상 및 비유동영역(dead metal zone)까지 에측이 가능한 단순하고 체계적인 이론해석법을 제안하고 이에 대한 실험을 수행하여 확인해 보고자 한다.

• 한국정밀공학회지
• /
• 제8권3호
• /
• pp.93-104
• /
• 1991

Limit analysis is based on the duality theorem which equates the least upper bound to the greatest lower bound. In this study, limit analysis of axisymmetric forming problem with workhardening materials is formulated by minimizing the upper bound functional and finite element program is developed for forward estrusion. Limit loads, velocity and flow line fields are directly obtained under various process conditions and deformation characteristics such as strains, strain rates and grid distortion are obtained from the optimum velocity components by numerical calculation. The experimental observation was carried out for extrusion and compared with computed results. The good agreement between theoretical and experimental results is shown that the developed programming is very effective for the analysis of axisymmetric extrusion.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1780-1783
• /
• 2002

A problem of signal transmitted and received in OFDM systems is considered. In particular, an efficient solution to the problem of blind channel estimation based on Maximum Likelihood (ML) principle has been investigated. The paper proposes a new upper-bound cost, used in conjunction with a standard branch and bound integer programming technique for solving the ML problem. The tighter upper-bound cost exploits a finite-alphabet property of the transmitted signal. The proposed upper-bound cost was found to greatly speed up the ML algorithm, thus reducing computational complexity. Experimental results and discussion are included.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1993년도 한국자동제어학술회의논문집(국제학술편); Seoul National University, Seoul; 20-22 Oct. 1993
• /
• pp.372-377
• /
• 1993

In this paper, we investigate a set-membership identification approach to the quantification of an upper bound of model uncertainty in frequency domain, which is required in the H$_{\infty}$ robust control system design. First we formulate this problem as a set-membership identification of a nominal model error in the presence f unknown noise input with unknown bound, while the ordinary set-membership approaches assume that an upper bound of the uncertain input is known. For this purpose, the proposed algorithm includes the estimation of the bound of the uncertain input. thus the proposed method can obtain the hard bound of the model error in frequency domain as well as a parametric lower-order nominal model. Finally numerical simulation results are shown to confirm the validity of the presented algorithm..