• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.2
• /
• pp.131-137
• /
• 1999

Package crack caused by the soldering process in the surface mounting plastic package is evaluated by applying the energy release rate criterion. The package crack formation depend on various parameters such as chip set, chip size, package thickness, package width, material properties and the moisture content etc. The effects of chip set and the other parameters were estimated during the analysis of package cracks which were located in the edge of the upper interface of the chip and the lower interlace of the die pad. From the results, it could be obtained that the more significant parameters to effect the chip set are chip width.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.1
• /
• pp.1-11
• /
• 2005

A network consisting of a set of N nodes and a set of links is considered. The nodes are assumed to be perfect and the states of links to be binary and associated to each other. After defining a network structure function, which represents the state of network as a function of the states of links, we obtain some lower and upper bounds on the network reliability by adopting minmax principle and minimal path and cut set arguments. These bounds are given as functions of the reliabilities of links. The bridge network is considered as an example.

• Bulletin of the Korean Mathematical Society
• /
• v.58 no.1
• /
• pp.171-181
• /
• 2021

The fixing number of a graph G is the smallest order of a subset S of its vertex set V (G) such that the stabilizer of S in G, ��S(G) is trivial. Let G1 and G2 be the disjoint copies of a graph G, and let g : V (G1) → V (G2) be a function. A functigraph FG consists of the vertex set V (G1) ∪ V (G2) and the edge set E(G1) ∪ E(G2) ∪ {uv : v = g(u)}. In this paper, we study the behavior of fixing number in passing from G to FG and find its sharp lower and upper bounds. We also study the fixing number of functigraphs of some well known families of graphs like complete graphs, trees and join graphs.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.51 no.2
• /
• pp.99-104
• /
• 2002

In this paper, we construct a hybrid intelligent controller based on a fusion scheme of GA(Genetic Algorithm) and FCM(Fuzzy C-Means) clustering-based ANFIS(Adaptive Neuro-Fuzzy Inference System). In the structure identification, a set of fuzzy rules are generated for a given criterion by FCM clustering algorithm. In the parameter identification, premise parameters are optimally searched by adaptive GA. On the other hand, consequent parameters are estimated by RLSE(Recursive Least Square Estimate) to reduce the search space. Finally, we applied the proposed method to the truck backer-upper control and obtained a better performance than previous works.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.29 no.1
• /
• pp.113-125
• /
• 2004

The network disconnection problem ms to find a set of edges such that the total cost of removing the edges is no more than a given budget and the weight of nodes disconnected from a designated source by removing edges is maximized. Martel et at. have shown that the problem with unit capacity and unit demand Is NP-hard and Myung and kim present an integer programming formulation and develop an algorithm that Includes a preprocessing procedure and lower and upper bounding strateagies. in this paper, we present new findings on the properties of the optimal solution and an alternative integer programming formulation, based on which new lower and upper bounding strategies are developed. Computational results for evaluating the performance of the proposed algorithm are also presented.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.4
• /
• pp.64-71
• /
• 2009

A 3-D rehabilitation robot system is developed in this paper. The robot system is for the rehabilitation of upper extremities, especially the shoulder and elbow joints, and has 3-D workspace for enabling occupational therapy to recover physical functions in activities of daily living(ADL). The rehabilitation robot system, which is driven by actuators, has 1 DOF in horizontal rotational motion and 2 DOF in vertical rotational motion, where all actuators are set on the ground. Parallelogram linkage mechanisms lower the equivalent inertia of the control elements as well as control forces. Also the mechanisms have high mechanical rigidity for the end effector and the handle. Passive motion mode experiments have been performed to evaluate the proposed robot system. The results of the experiments show and excellent performance in simulating spasticity of patients.

• Structural Engineering and Mechanics
• /
• v.51 no.4
• /
• pp.565-579
• /
• 2014

The pullout capacity of plate anchors has been studied extensively over the past 40 years. However, very few studies have attempted to calculate the pullout capacity of anchors in sandy slopes. In this paper, three upper bound approaches are used to study the effect of a sloping ground surface and friction angle on pullout capacity and failure of plate anchors. This includes the use of; simple upper bound mechanisms; the block set mechanism approach; and finite element upper bound limit analysis. The aim of this research is to better understand the various failure mechanisms and to develop a simple methodology for estimating the pullout capacity of anchors in sandy slopes.

• Journal of Environmental Science International
• /
• v.23 no.3
• /
• pp.399-407
• /
• 2014

In this study, before and after sunset carbon dioxide concentration and air temperature were observed in two points of atmosphere (lower observation point of the GL + 0.1 m, the upper observation point of GL + 1.0 m) on the foreshore at located in Suncheon Bay and their variations were analyzed. Observation was performed on the foreshore on 2~4 August 2010. Instrument (VAISALA, GMP343) was set two hours before sunset and then observation was made continuously for six hours. In three days, observed carbon dioxide concentration was 375~419 ppm, and the air temperature was in the range of $28.7{\sim}32.5^{\circ}C$. The average concentration of carbon dioxide was 388~399 ppm in the upper observation point and 386~396 ppm in the lower observation point. It was higher in the upper observation point and its fluctuations were similar in two observation points. Correlation coefficients between carbon dioxide concentration and air temperature in the upper observation point were in the range of -0.64~-0.88, and were calculated -0.65 to -0.90 in the lower observation point. For the carbon dioxide concentration, correlation coefficients between the upper part and the lower part were very high as 0.98 in three times. For the air temperature, correlation coefficients between the upper part and the lower part were very high as 0.97 and 0.99. In the same observation time, the slope of the linear regression function as carbon dioxide concentration in the lower observation point for the upper observation point was in the range of 0.97~1.01. Carbon dioxide concentration was slightly higher in the upper observation point. Because carbon dioxide in the lower observation point was closer on the surface of the foreshore and absorbed from atmosphere to the foreshore. In this study, it was showed that the vertical variation of carbon dioxide concentration was insignificant in the several meter scale of atmosphere on the surface of the foreshore.

• Journal of Fashion Business
• /
• v.8 no.1
• /
• pp.1-15
• /
• 2004

The purpose of this study is to provide for some basic data useful to production of the apparels fit and measured well for the Chinese men. For this purpose, Chinese men's apparel measurements and specifications were determined per area group(Beijing/ Shanghai) according to the Men's Wear Specifications (GB/T 1335.1-1997), National Standards of People's Republic of China. The collected data were statistically processed using SAS 6.12 for technical statistical analysis, correlation analysis, factor analysis, group-wise analysis and ANOVA. The results of this study can be summarized as follows; 1. As a result of dividing the Chinese men into Beijing and Shanghai men and thereby, setting height and upper chest circumference for upper garments and height and waist for lower garments. 2. Analyzing the correlations according to the three-fold classifications of height/upper chest circumference/waist for garment specifications, 17 specifications based on heights and upper chest circumferences for Beijing men's upper garments could be designed within the deviation level of 2%, while 15 specifications based on waist measurements could be designed (between $70{\sim}98cm$) for their lower garments within the deviation level of 4%. Thus, a total of 60 combinations of the specifications could be obtained. 3. 16 specifications based on heights and upper chest circumferences for Shanghai men's upper garments could be designed within the deviation level of 2%, while 16 specifications based on waist measurements could be designed (between $68{\sim}98cm$) for their lower garments within the deviation level of 3%. Thus, a total of 56 combinations of the specifications could be obtained. For other reference measurements, grading measures were set for each type and body part, while the average measures of major body parts were calculated.

• Journal of the Ergonomics Society of Korea
• /
• v.28 no.4
• /
• pp.9-15
• /
• 2009

Our study goal is to find out how the table height influences functional ability of upper extremity to patients with stroke when they are having therapy. In this study, we tested forty patients with stroke at the age of over sixty-five who do not have visual, auditory disability and have no difficulty in communicating and moving things by using upper extremity. And they were able to pinch grip in hospital. We used occupational table for occupational therapy as Lab Materials. We also used cube and pegs board to test upper extremity functional ability. We used occupational table for occupational therapy as Lab Materials and we used cube and pegs board to test upper extremity functional ability. The method is that we measured the recommended table height that takes the subjects' size into consideration and patients' preferred table height and therapists' preferred table height and we applied them and then we have done a comparative analysis and set significance level(p<0.05). As the result, we found the Statistically significant between the recommended height and the other two, which are patients' preferred height and therapists' preferred height. We also discovered that functional ability of upper extremity varies significantly depending on each table height. We came to a conclusion that the table height had effects on the upper extremity functional ability of patients with stroke who are over sixty-five years old. It is therefore considered that the proper table height is important to improve upper extremity functional ability of patients with stroke for their physical therapy.