• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.1
• /
• pp.71-78
• /
• 2021

Implant treatment, which was first attempted in fully edentulous patients, is now widely used in partially edentulous, and a single tooth missing patients. Moreover, implant treatment has become an essential treatment modality in modern dentistry. The material of fabricating implant prostheses has also become more diverse than before, one of which is the use of high-performance polymers. The frequency of using high-performance polymers, which have been used in the medical field, is also increased in the dental field compared to the past. In the first case, a PEKK abutment and a PFG crown (cement-screw-retaining type) were fabricated in the lower left second premolar, and in the second case, a PEKK abutment and a monolithic zirconia crown (cement-screw-retaining type) were fabricated in the missing upper left first molar, and in the third case two PEKK abutments and a splinted PFM crowns (cement-screw-retaining type) were fabricated and connected to the upper right first and second molar implants. Through these procedures the patients obtained esthetically and functionally satisfactory results after 4 years of follow-up.

• The korean journal of orthodontics
• /
• v.27 no.6 s.65
• /
• pp.905-916
• /
• 1997

The purpose of this investigation were to evaluate facial vortical changes occurring in patients treated orthodontically with first premolar, second remolar and second molar extractions : to compare these changes with those occurring in patients treated orthodontically without extractions : and finally, to evaluate the effects of extractions in facial vortical changes. Cephalometric records of 50 male & female nonextraction patients and 88 male & female extraction patients were obtained from the department of orthodontics at Chosun University, College of Dentistry. The second molar fully erupted pPatients to have little variation according to growth were chosen as the sample for this investigation. For comparisons, the samples of 88 male & female extraction patients were subdivided into 42 first premolar extraction, 24 second premolar extraction, and 22 second molar extraction patients. Fourteen cephalometric measurements were selected to examine whether orthodontic extraction treatment led to vertical changes or not. The pretreatment and posttreatment lateral cephalographs were taken on the same radiographic unit. $SPSS/PC^+$ statistical program was used to compare and to analyze the changes between 'before & after' orthodontic treatment. The results of this study were as follows. 1. There were no statistical significances in any cephalometric measurements between 'before & after' orthodontic treatment regardless of orthodontic extractions for each group. 2. On average, the upper 6 to palatal Plane and the lower 6 to mandibular plane after orthodontic treatment were increased in all group. This means most of orthodontic mechanics are extrusive in nature. Especially, in orthodontic extraction. cases, it may be caused by orthodontic mechanics for space closure and alignments. 3. On average, in the second molar extraction group, the facial vertical dimension was increased after orthodontic treatment. It nay be induced as a result of moving the molars distally to gain enough space to correct the molar relationship and to simultaneously improve the deep bite. 4. There was no statistical significance between orthodontic extractions and facial vertical changes. This means that orthodontic extractions have no influence on facial vortical changes. 5. The cephalometric measurements with statistical significance in ficial vertical changes for each group were PP-MP, Op-MP, $\underline{1}$ to PP and $\overline{1}$ to MP.

• The Journal of the Korean dental association
• /
• v.10 no.12
• /
• pp.809-812
• /
• 1972

This present paper is concerned with four unit fixed bridge construction by one piece casting technique in the case of missing of upper left second premolar and first molar. The authors had good clinical results with following advantages. 1. The complete bridge can be delivered to the patient for two appointments. 2. The laboratory procedures for solder joint are not necessary. 3. A one piece casting can be properly shaped without weak joints. 4. The casting can be heat-treated to insure an ideal molecular structure. 5. Porcelain veneers can be applied without weakening or melting solder joints.

• The Journal of the Korean dental association
• /
• v.12 no.2
• /
• pp.107-111
• /
• 1974

In order to collect some necessary data to promote correcting the toothbrushing technic on the Korean public, the author had examined the number of present teeth on which had cervical abrasion and the most basic home dental care in 2,000 Korean male and female adults from 19 to 52 years in the age. Then, the cervical abrasion experience rate and the cervical abrasion experience teeth rate were calculated and evaluated. The obtained results were as follows: 1. Cervical abrasion experience rate was 32.45% 2. Cervical abrasion experience rate was gradually increased by ageing. 3. Cervical abrasion experience rate in male adults was higher than that in female adults. 4. Cervical abrasion experience rate in the lower jaw was higher than that in the upper jaw. 5. Cervical abrasion experience rate of the teeth at the right side was higher than that of the teeth at the left side. 6. Cervical abrasion experience teeth rate was 3.82%. 7. Cervical abrasion experience rate was highest on the first bicuspid, and followed in the sequence of the second bicuspid, canine, first molar, incisors, and 2nd and 3rd molars.

• The Journal of the Korean dental association
• /
• v.38 no.6 s.373
• /
• pp.567-569
• /
• 2000

Many teeth have been mistakenly extracted or endodontically treated because of an incorrect diagnosis of orofacial pain including toothache, A case report of persistent toothache originating from a malignant lymphoma of left maxilary sinus is presented. Root canal therapy and extraction of left upper quadrant teeth from canine to second molar did not resolve the chief complaint. The patient was referred to a neurologist and was diagnosed with a malignant lymphoma, a rare lesion of the maxillary sinus. The case stresses the importance of malignant neoplasms of maxillary sinus as a potential etiologic factor in the differential diagnosis of orofacial pain.

• Journal of the Korean Association of Oral and Maxillofacial Surgeons
• /
• v.41 no.4
• /
• pp.194-197
• /
• 2015

The amniotic membrane is the innermost layer of fetal membrane and is attached to the chorion in the placenta. This membrane has been used for nearly a century in varied fields such as ophthalmology, reconstructive surgery, and burn treatment. In this case report, we used a human amniotic membrane to repair an iatrogenic oroantral communication that occurred during the extraction of the patient's right upper second molar. A splint was given after the perforation was covered with human amniotic membrane and healing was clinically evaluated at various intervals. The outcome of the study revealed that the human amniotic membrane was an efficient graft material for repairing the defect caused by an iatrogenic oroantral communication following tooth extraction.

• The Korean Journal of Physiology
• /
• v.3 no.1
• /
• pp.33-44
• /
• 1969

Electoromyographic studies were performed on the action of the muscles of the temporomandibular joints following exfoliation of the deciduous teeth. The subjects examined, being 50 children. between the age of 6 and 13 years, divided into 5 groups. They were; 1) Deciduous dentition were complete in the first group. 2) Deciduous incisors were missing in either upper or lower jaw in the second group. 3) Deciduous canine and molars were missing in the left side of either upper or lower jaw in the third group. 4) Deciduous canine and molars were missing in the right side of either upper or lower jaw in the fourth group. 5) Permanent dentition completed in the fifth group(except third molars). Electromyogram was recorded with 4 channel polygraph (Grass model VII modified for 7P3). Electrodes which were the cup-typed gold discs, 9 millimeters in the diameter, were located on the anterior, middle and posterior lobes of the temporal muscles, and also on the superficial and deep layers of the masseter muscles. Paired electrodes were held by electrode cream so that they were pressed on the skin surface at right angle, adhesive tape being used to anchor them. The distance of the pair electrodes was about 5 millimeters. The results obtained were as follow: 1) In rest position of mandible; All groups showed slight, electrical activities in the muscles involved, but in the middle lobe of temporal muscle they were slightly higher. 2) In molar occlusion of mandible; High activity-anterior lobe of temporal muscle and superficial layer of masseter muscle. Moderate activity-deep layer of masseter muscle. Low activity-middle and posterior lobes of masseter muscle. There were no differences among the first, the second and the fifth groups. In the third group the muscle activity was weaker than that of the right, and in the fourth group opposite characteristics was revealed. 3) In incisal bite of mandreble; Hight activity-superficial layer of masseter muscle. Modertae activity-deep layer of masseter muscle. Low activity-anterior, middle and posterior lobes of temporal muscle. The first, the third, the fourth and the fifth groups showed no differences but the second group showed less activity than those of others. 4) In protrusion of mandible; High activity-deep layer of masseter muscle Moderate activity-superficial layer of masseter muscle. Low activity-anterior, middle and posterior lobes of temporal muscle. In the first, the fourth and the fifth groups, there were no differences in the activities, but the second group showed less activity than the others. 5) In retrusion of mandible; High activity-deep layer of masseter muscle. Moderate activity-superficial layer of masseter muscle. Low activity-anterior, middle and posterior lobes of temporal muscle. In the first, the third, the fourth and the fifth groups, there were no differences but the second group showed less activity than the others. 6) In lateral excursion of the mandible (either direction); High activity-posterior lobe of temporal muscle. Moderate activity-anterior and middle lobes of temporal muscle. Low activity-superficial and deep layers of masseter muscle. The muscle action potentials were weaker than those of the right side in the third group and vice ver'sa in the fourth group. 7) In chewing movement; Temporal muscle activities were higher than those of masseter, especially in the middle lobe of temporal muscle the activity was highest. Right side muscle activities were higher than those of the left in the third group and, on the contrary, the left side was dominant over the right in the fourth group.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.98-113
• /
• 2007

Objective: The purpose of this study was to evaluate the displacement pattern and the stress distribution shown on a finite element model 3-D visualization of a dry human skull using CT during the retraction of upper anterior teeth. Methods: Experimental groups were differentiated into 8 groups according to corticotomy, anchorage (buccal: mini implant between the maxillary second premolar and first molar and second premolar reinforced with a mini Implant, palatal: mini implant between the maxillary first molar and second molar and mini implant on the midpalatal suture) and force application point (use of a power arm or not). Results: In cases where anterior teeth were retracted by a conventional T-loop arch wire, the anterior teeth tipped more postero-inferiorly and the posterior teeth moved slightly in a mesial direction. In cases where anterior teeth were retracted with corticotomy, the stress at the anterior bone segment was distributed widely and showed a smaller degree of tipping movement of the anterior teeth, but with a greater amount of displacement. In cases where anterior teeth were retracted from the buccal side with force applied to the mini implant placed between the maxillary second premolar and the first molar to the canine power arm, it showed that a smaller degree of tipping movement was generated than when force was applied to the second premolar reinforced with a mini implant from the canine bracket. In cases where anterior teeth were retracted from the palatal side with force applied to the mini implant on the midpalatal suture, it resulted in a greater degree of tipping movement than when force was applied to the mini implant between the maxillary first and second molars. Conclusion: The results of this study verifies the effects of corticotomies and the effects of controlling orthodontic force vectors during tooth movement.

• The korean journal of orthodontics
• /
• v.29 no.5 s.76
• /
• pp.521-534
• /
• 1999

The purpose of this study was to find the difference of stress distribution on canine altered by the application point of preangulated T-loop spring. For this study, the finite element models of upper left canine, upper left second premolar and upper left first molar were made. Also, the finite element models of $0.017{\times}0.025$ inch preangulated, preactivated T-loop spring and $0.018{\times}0.025$ inch stainless steel wire were made. Three types of T-loop spring were made . the middle of activated T-loop is positioned in accordance with the middle position of distance of bracket position of both the canine and first molar, 2mm anterior, 2mm posterior. We compared the forces and the distribution of stress that were generated by the difference of position of T-loop spring. The results were as follows. 1. All of the 3 types of T-loop spring showed the similar retraction forces. 2. All showed the similar amount & pattern of stress distribution. 3. The centers of rotation of canine in 3 types of T-loop spring were same and were positioned between C and D plane. 4. The canine showed the intrusive force by 2mm anterior positioned T-loop spring, but the extrusive force by 2mm posterior positioned T-loop suing. Neverthless, because of the small amount of the forces, the effect of vertical force was not significant.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.435-441
• /
• 2002

Surgical microscrews were introduced and used as one method to provide absolute anchorage. Some clinicians implanted microscrews or miniscrews into the basal bone below the roots of the teeth to evade damage to the roots. Because the implanted microscrews were positioned too low the applied force was insufficient to retract the anterior teeth or protract the posterior teeth, and the use of microscrews or miniscrews seemed limited in applying vertical force. However Park implanted microscrews(micro-implants (1.2mm in diameter)) into the alveolar bone between the roots of the posterior teeth to change the direction of the applied force toward increasing horizontal component of the force. Moreover, these microscrew implants were positioned in the alveolar bone between the roots without causing discernable damage to the roots. This study was performed to provide guidelines and anatomic data to assist in the determination of the safe location for micro-implants. By measuring the CT images from 21 patients, anatomical data were obtained which were then used as a guide to determine the location for the implantation of micro-implants. The thickness of the cortical bones at the alveaolar bone region increased from the anterior to the posterior teeth area. The mandibular posterior teeth area showed thicker cortical bone. A greater distance was observed in distance between the second premolar root and first molar root in the upper arch, between the first molar root and the second molar root in the lower arch. The alveolar bone of the posterior teeth area is considered the best site for the implantation of micro-implants.