• 제목/요약/키워드: uplift performance

검색결과 51건 처리시간 0.022초

2017년도 온실설계기준(안)에 따른 제주지역 비닐하우스의 내재해성 평가 (Performance Evaluation of Disaster Resistance of Plastic Greenhouse in Jeju Region according to 2017 Design Code Draft)

  • 고동우
    • 한국농촌건축학회논문집
    • /
    • 제22권1호
    • /
    • pp.13-20
    • /
    • 2020
  • As the number of plastic greenhouses has increased in Korea, the damage from typhoons and snow has also increased. Structural design codes for a disaster-resistant plastic greenhouse have been revised over the last few decades. In particular, the revised code draft in 2017 have changed in many ways compared to the 1995 code. Nevertheless, There is no study of the effect of new design code on plastic greenhouse. Therefore, this study evaluated the safety of plastic greenhouse against wind load according to 1995 and 2017 codes for type 1 houses, which is most commonly built in Jeju, through comparing the analytical results of plastic greenhouses designed by 1995 code and 2017 code draft. The results are as follows. (1) The uplift load due to the negative pressure on the roof of the plastic greenhouse increased significantly in 2017 code draft. (2) Since the existing members could not meet the design requirements, the rafters had to be replaced with members of the same cross-section as the columns. (3) Due to excessive lifting, measures were also needed to prevent lifting at the foundation of the plastic greenhouse.

L-헤더 시스템의 좌굴 거동에 관한 실험 연구 (Experimental Study on the Buckling Behavior of L-Shaped Header System)

  • 박완순;김갑득
    • 한국강구조학회 논문집
    • /
    • 제14권5호통권60호
    • /
    • pp.665-674
    • /
    • 2002
  • 스틸 스터드 구조물에서 사용되고 있는 기존 I형, 박스형 헤더는 시공성, 경제성 측면에서 여러 가지 문제점을 노출하고 있다. 이러한 문제점을 극복하기 위해 선진국에서는 냉간성형강을 L형으로 절곡한 L-헤더를 활발히 사용하고 있다. 그러나 국내에서는 이에 대한 연구가 부족하여 L-헤더를 사용하지 못하고 있는 실정이다. 본 연구에서는 이러한 문제점을 해결하기 위해 L-헤더에 대한 좌굴해석 및 휨 실험을 수행하였으며, 실험결과를 미국 철강협회(AISI, American Iron and Steel Institute) 설계기준과 비교하였다. 휨 실험결과 중력방향 하중이 작용하는 경우에는 국부좌굴이, 인발하중이 작용하는 경우에는 뒤틀림 좌굴이 발생되는 것으로 관찰되었다. 그리고 실험에서 측정된 좌굴 하중을 비교한 결과 AISI 설계기준에 제시된 공칭하중을 상회하는 것으로 확인되었다.

시인식에서 반사상의 영향에 관한 인간공학적 연구 (An Ergonomic Study on the Effects of Veiling Reflection in Visibility)

  • 박재민;임기용;이상도
    • 대한인간공학회지
    • /
    • 제19권3호
    • /
    • pp.13-21
    • /
    • 2000
  • Men perceive and react around him through the five senses. Also men give rise to the human sensibility and maintain his emotion. This study doesn't limit working environment to VDT environment, but considers the universal working environment acquiring information by eyesight stimulation. In case of forming an abnormal veiling reflection we consider the form ; a vertical(25%, 50%, 75%)and a horizontal(25%, 50%, 75%). The results from the subjective evaluation are analyzed by SD(Semantic Differentical methodology)of 5 point scale for visibility and nuisance when an abnormal veiling reflection forms on target. In addition, the results of the objective evaluation are suggested by measuring and analyzing EEG of bio-signal for visual sensitivity. The results of this study can apply to basic data which create a guideline of a visual operation. In particular, it can be designed as an illumination environment concerning an ergonomic factor on visual operations, mental stress such as a visual inspection operation, visual information search operation, etc. As a result, we can expect to reduce the visual nuisance and contribute to the improvement of the performance and the uplift of the competitive power.

  • PDF

Development and validation of a numerical model for steel roof cladding subject to static uplift loads

  • Lovisa, Amy C.;Wang, Vincent Z.;Henderson, David J.;Ginger, John D.
    • Wind and Structures
    • /
    • 제17권5호
    • /
    • pp.495-513
    • /
    • 2013
  • Thin, high-strength steel roof cladding is widely used in residential and industrial low-rise buildings and is susceptible to failure during severe wind storms such as cyclones. Current cladding design is heavily reliant on experimental testing for the determination of roof cladding performance. Further study is necessary to evolve current design standards, and numerical modelling of roof cladding can provide an efficient and cost effective means of studying the response of cladding in great detail. This paper details the development of a numerical model that can simulate the static response of corrugated roof cladding. Finite element analysis (FEA) was utilised to determine the response of corrugated cladding subject to a static wind pressure, which included the anisotropic material properties and strain-hardening characteristics of the thin steel roof cladding. The model was then validated by comparing the numerical data with corresponding experimental test results. Based on this comparison, the model was found to successfully predict the fastener reaction, deflection and the characteristics in deformed shape of the cladding. The validated numerical model was then used to predict the response of the cladding subject to a design cyclone pressure trace, excluding fatigue effects, to demonstrate the potential of the model to investigate more complicated loading circumstances.

The Effect of Microfinance Services on Women Entrepreneurship: A Case Study in Jordan

  • THAHER, Lubna Mohammad;RADIEAH, Nor Mohd;WAN NORHANIZA, Wan Hasan
    • The Journal of Asian Finance, Economics and Business
    • /
    • 제8권5호
    • /
    • pp.807-815
    • /
    • 2021
  • Microfinance is seen as a tool for poverty elimination by providing various services characterized as financial and non-financial to minority groups in the society to be included in the mainstream financial system. This paper seeks to examine the effect of microfinance institutions' (MFIs) financial and non-financial services on women's entrepreneurship and empowerment in Jordan as a developing country. To gain a deeper understanding of the effectiveness of microfinance services, the study is undertaken to address the question of what kinds of services are available and whether the MFI services are in line with the actual needs of women entrepreneurs to improve their performance. Hence, a qualitative approach was adopted in this study using semi-structured interview questions to collect data from twenty-four women entrepreneurs in Jordan. The results showed that, as regards financial services, the most important needs of women entrepreneurs include providing adequate financing with necessary financial facilities such as reducing interest, reducing monthly installments, and extending the grace period, while non-financial services should include holding specialized courses, accessing a counseling center, providing incentives and psychological support, marketing support, and monitoring and evaluation. This study concluded that factors associated with MFI play a crucial role to uplift women entrepreneurs and eliminate gender inequality.

암반공동 열에너지저장소 주변 암반의 열-수리-역학적 연계거동 분석 (Coupled Thermal-Hydrological-Mechanical Behavior of Rock Mass Surrounding Cavern Thermal Energy Storage)

  • 박정욱;;류동우;신중호;박의섭
    • 터널과지하공간
    • /
    • 제25권2호
    • /
    • pp.155-167
    • /
    • 2015
  • 본 연구에서는 TOUGH2-FLAC3D 연계해석기법을 이용하여 암반공동에 고온의 열에너지를 30년간 저장하는 경우 주변 암반에 야기되는 열-수리-역학적 연계거동을 살펴보았다. 열에너지저장에 따른 암반의 거동 특성 및 환경 영향을 예측하고 이에 대한 제어기준을 수립하기 위한 기초 연구로서, 저장소 주변 암반에서 발생하는 열-수리 흐름과 역학적 거동의 상호작용에 대하여 검토하였다. 기본해석으로서 결정질 암반 내 원통형 공동에$350^{\circ}C$의 대용량 열에너지를 저장하는 경우를 모델링하였으며, 열에너지저장소의 단열성능은 고려하지 않았다. 암반 내 열전달의 주요 메카니즘은 암반의 전도에 의한 것으로 판단되며, 암반의 역학적 거동은 수리적 요소보다는 열적 요소에 지배적인 영향을 받는 것으로 나타났다. 암반과 지하수 가열에 따른 유효응력 재분포 양상과 열팽창으로 인한 암반 변위 및 지표 융기를 검토하였으며, 주변 암반에서의 전단파괴 위험도를 정량적인 수치를 통해 제시하였다. 암반 가열에 따른 열팽창으로 인하여 지표면에서 수 cm의 융기가 발생하였으며, 저장공동 상부에 인장응력이 크게 발달하면서 전단파괴의 위험도가 증가하는 것으로 나타났다.

Quasi-static test of the precast-concrete pile foundation for railway bridge construction

  • Zhang, Xiyin;Chen, Xingchong;Wang, Yi;Ding, Mingbo;Lu, Jinhua;Ma, Huajun
    • Advances in concrete construction
    • /
    • 제10권1호
    • /
    • pp.49-59
    • /
    • 2020
  • Precast concrete elements in accelerated bridge construction (ABC) extends from superstructure to substructure, precast pile foundation has proven a benefit for regions with fragile ecological environment and adverse geological condition. There is still a lack of knowledge of the seismic behavior and performance of the precast pile foundation. In this study, a 1/8 scaled model of precast pile foundation with elevated cap is fabricated for quasi-static test. The failure mechanism and responses of the precast pile-soil interaction system are analyzed. It is shown that damage occurs primarily in precast pile-soil interaction system and the bridge pier keeps elastic state because of its relatively large cross-section designed for railways. The vulnerable part of the precast pile with elevated cap is located at the embedded section, but no plastic hinge forms along the pile depth under cyclic loading. Hysteretic curves show no significant strength degradation but obvious stiffness degradation throughout the loading process. The energy dissipation capacity of the precast pile-soil interaction system is discussed by using index of the equivalent viscous damping ratio. It can be found that the energy dissipation capacity decreases with the increase of loading displacement due to the unyielding pile reinforcements and potential pile uplift. It is expected to promote the use of precast pile foundation in accelerated bridge construction (ABC) of railways designed in seismic regions.

Performance evaluation of a seismic retrofitted R.C. precast industrial building

  • Nastri, Elide;Vergato, Mariacristina;Latour, Massimo
    • Earthquakes and Structures
    • /
    • 제12권1호
    • /
    • pp.13-21
    • /
    • 2017
  • Recent seismic events occurred in Italy (Emilia-Romagna 2012, Abruzzo 2009) and worldwide (New Zealand 2010 and 2011) highlighted some of the weaknesses of precast concrete industrial buildings, especially those related to the connecting systems traditionally employed to fasten the cladding panels to the internal framing. In fact, one of the most commons fails it is possible to observe in such structural typologies is related to the out-of-plane collapse of the external walls due to the unsatisfactory behaviour of the connectors used to join the panels to the perimeter beams. In this work, the strengthening of a traditional industrial building, assumed as a case study, made by precast reinforced concrete is proposed by the adoption of a dual system allowing the reinforcement of the structure by acting both internally; by pendular columns and, externally, on the walls. In particular, traditional connections at the top of the walls are substituted by devices able to work as a slider with vertical axis while, the bottom of the walls is equipped with two or more hysteretic dampers working on the uplift of the cladding panels occurring under seismic actions. By means of this approach, the structure is stiffened; obtaining a reduction of the lateral drifts under serviceability limit states. In addition, its seismic behaviour is improved due to the additional source of energy dissipation represented by the dampers located at the base of the walls. The effectiveness of the suggested retrofitting approach has been checked by comparing the performance of the retrofitted structure with those of the structure unreinforced by means of both pushover and Incremental Dynamic Analyses (IDA) in terms of behaviour factor, assumed as a measure of the ductility capacity of the structure.

Twist Wheel 방식 폐비닐수거기 개발에 관한 연구(I) - 자주형 비닐수거기의 개발 - (A Study on the Development of Twist Wheel Type Waste Vinyl Remover(I) - Development of Self-Propelling Type Vinyl Remover -)

  • 하유신;박규식;김진현;최중섭;손철민;남상헌;김태욱
    • 한국기계가공학회지
    • /
    • 제11권1호
    • /
    • pp.113-118
    • /
    • 2012
  • Mulching vinyl is used on field crops to reduce herbicides and this causes multiple effects. The mulching vinyl must be collected for the next crop season, but was left alone due to a shortage of labor. The used mulching vinyl that was left alone acted as one of the main sources of environmental pollution on farms. In order to solve these problems, a self-propelling vinyl remover was developed. The self-propelling vinyl remover consists of a travelling part and rotating of remover wheel. Each output device has a 1.5ps engine and a 2.5ps engine. The vinyl was twisted 17~47cm/times length. The bobbin's diameter was 160mm and it's stable travelling speed was 0.5m/s. The revolution of the remover wheel bobbin was 60rpm to maintain the wheel's linear velocity. As seen at performance test at the field which had 950mm ridge intervals and 10a area, the average working speed was 0.56m/s and the turning time was 15seconds. Therefore, the working performance was 40.1min/10a.

공공의료기관의 공공성과 수익성 상호관계에 대한 연구 - 지방공사의료원의 경영평가를 중심으로- (Profitability and Publicity of the Regional Public Hospitals in Korea - With focus on administration assessment of regional public hospitals -)

  • 이동원;윤방섭;남은우
    • 한국병원경영학회지
    • /
    • 제12권2호
    • /
    • pp.43-68
    • /
    • 2007
  • The administration of a regional public hospitals are expending from profit preference to publicity preference. The weight rate for a profitability and publicity of performance assessment has changed from 84:16 which was resulted by the assessment executed firstly in 1989 to 39:61 as resulted in 2004, the final assessment execution in 2005. Regional public hospitals are exerting and promoting a magnification in public sector to raise up the public-score. With comparison between publicity scores and profitability scores in original scores basis excluding weight rate, the publicity scores ranked higher than profitability scores although the latter was higher by 2002. However, for the administration performance of the regional public hospitals, the deficits increased 11 times from \92.6billion deficits with \460.3billion cost increased by 457% although income as \367.7billion increased by 394% comparing the last 2004 year to the first 1989 year for profit & loss statement of a regional public hospitals. There was analysis for the relation in yearly basis partitioning publicity and profitability for the assessment scores of the to regional public hospitals confirm the accumulated deficits of the hospitals like this attribute to the extension of public sector. The result showed that there was distinct plus relationship from 1999 although a minus relationship in general until 1997 except 1992 and there is a more plus relationship as approaching 2004. That is, it is hard to tell that the accumulated deficits increase of regional government medical center attributed to extension of public sector. On the contrary, the analysis showed the extension of public sector has a mutual relationship with uplift of profitability Meanwhile, it showed that operation cost rate and labor cost are the factors which influence a revenue & expenditure rate among the profitability index according to the results of relation analysis for the representative index of profitability and that of publicity.

  • PDF