• Membrane Journal
• /
• v.33 no.6
• /
• pp.352-361
• /
• 2023

Steam methane reforming is currently the most widely used technology for producing hydrogen, a clean fuel. Hydrogen produced by steam methane reforming contains impurities such as carbon monoxide, and it is essential to undergo an appropriate post-purification step for commercial usage, such as fuel cells. Recently, membrane separation technology has been gaining great attention as an effective purification method; in this study, we evaluated the feasibility of using commercial polysulfone membranes for biogas upgrading to separate and recover hydrogen from a hydrogen/carbon monoxide gas mixture. Initially, we examined the physicochemical properties of the commercial membrane used. We then conducted performance evaluations of the commercial membrane module under various conditions using mixed gas, considering factors such as stage-cut and operating pressure. Finally, based on the evaluation results, we carried out simulations for process design. The maximum H₂ permeability and H₂/CO separation factor for the commercial membrane process were recorded at 361 GPU and 20.6, respectively. Additionally, the CO removal efficiency reached up to 94%, and the produced hydrogen concentration achieved a maximum of 99.1%.

• Tribology and Lubricants
• /
• v.21 no.4
• /
• pp.165-170
• /
• 2005

Engine lubrication system has very complex oil flow networks. Therefore it is difficult to evaluate and optimize the system only depending on experimental results. When we plan upgrading the engine performance the engine lubrication system must be considered in the plan. In this paper, engine lubrication system design using computational fluid dynamic analysis was studied. To do this, unsteady transient flow network analysis on the engine oil circuit system was carried out. Finally we discussed the design process in the modified engine lubrication system.

• Korean Chemical Engineering Research
• /
• v.50 no.3
• /
• pp.391-397
• /
• 2012

The depletion of conventional oil reserves and the increasing energy need in developing countries such as China and India result in exceeding oil demand over supply. As a solution of the problem, the efficient utilization of heavy oil has been receiving more and more interest. In order to utilize heavy oil, upgrading processes are required. Among the upgrading processes, thermal decomposition is thought to be relatively simple and economical. In this study, to understand basic characteristics of thermal decomposition of heavy oil, we conducted pyrolysis experiments of deasphalted oil (DAO) produced by a solvent deasphalting process. DAO is a mixture of many components and consists mainly of materials of carbon number 20~40. For the comparison with results of DAO pyrolysis, additional pyrolysis experiments with single materials of carbon number 30 ($C_{30}H_{62}$, $C_{30}H_{58}O_4S$, $C_{30}H_{63}O_3P$) were conducted. Pyrolysis experiments were carried out non-isothermally with variation of heating rate (10, 50, $100^{\circ}C$/min) in a thermogravimetric analyzer. Average pyrolysis activation energy determined by using Arrhenius method, Ingraham and Marrier method, and Coats and Redfern method was 72~99 kJ/mol. In the activation energy calculated by Ozawa-Flynn-Wall method, DAO had wider variation than other single materials.

• Journal of Digital Convergence
• /
• v.10 no.1
• /
• pp.135-145
• /
• 2012

We are now observing that the information technology environments are rapidly changing toward smart and soft power computing. The main purpose of this paper is to investigate national-level information strategies and to provide suggestions for sustained growth of information technology industry which have played a significant role in upgrading national wealth and brand. In this context we look into the governance structures of the current government, delineate problematic sources, and derive remedial solutions, if any.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.5 no.6
• /
• pp.595-601
• /
• 2010

Desktop virtualization technology running on the local computing system in the process of resource depletion or degradation, such as upgrading the system to solve problems and manage critical information and systems must be protected. In addition, a virtualized environment by constructing a convenient stand-virtualized infrastructure and user space, and security from external attack or internal flaw or a problem, even if the service fails to respond quickly and should help to recover. In this paper, a comprehensive virtualization technology based on the client's desktop virtualization technology elements needed to find a local computing environment more comfortable and stable in the proposed new virtualization technologies.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.55 no.4
• /
• pp.363-371
• /
• 2019

Thousands of demersal fishes inhabit in the waters around Korea and most of them are overexploited. One of reasons is technological development, which increases the efficiency of the vessels continuously. The analysis was conducted to identify the change of fishing power index to develop the vessel and gear technology that may have improved the fishing efficiency of the Danish seine fishery from 1960s to 2010s. Gross tonnage was decreased stably, but the horse power was increased annually. The length of ground rope, warp and hand rope was somewhat longer, but changed a little. Color fish finder was utilized from the mid-1960s and positioning system was used five years later. A hydraulic line hauler were introduced in the mid-1980s, and supply rate was gradually increased. Surveys on the supply and upgrading of fishing equipment utilized visiting researchers. Therefore, the relative fishing power index in the Danish seine fishery increased stably from 1.0 in 1970 to 1.0 in 1980, to 1.2 in 1990, to 1.3 in 2000 and to 1.3 in 2010. The results are expected to contribute to reasonable fisheries stock management.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.5
• /
• pp.447-455
• /
• 2013

Hemicellulose extract obtained by pre-pulping extraction of woodchips, is very diluted acidic in nature. The major component responsible for this weak acidity is acetic acid, present in levels up to 5~10 g/L. Here, we report an exploratory study on the extract upgrading by reactive solvent extraction of acetic acid as well as ASPEN simulation. In this study, liquid-liquid equilibria for the ternary systems (water + acetic acid + ethyl acetate) were measured at the temperature of 298.15 K and 10 (pH = 2.02), 5 (pH = 2.17), and 1 (pH = 2.48) percent of acetic acid samples were used to carry out liquid-liquid extraction studies using ethyl acetate. In a one-stage batch experiment, 96.0% of acetic acid could be extracted for the solvent when the ratio of organic-to-aqueous phases is 4:1. For simulation results, they were used to estimate the interaction parameters between each of the three compounds of the systems studied for the NRTL and UNIQUAC models. The estimated interaction parameters were successfully used to predict the equilibrium compositions by the two models.

• Information Systems Review
• /
• v.3 no.1
• /
• pp.19-30
• /
• 2001

With the e-business paradigm emerging, the website became a critical resource for most corporations. However, the amount of value creation through internet is still in question. This paper shows the result of an exploratory study on website assessment, following the tradition of Technology Acceptance Model (TAM). We viewed the intended usage as the value of the website and added such factors as playfulness, commitment, system quality, and information security as external variables of the model. Website types, visiting purposes, and the user system quality were included as moderators. The website value could differ depending on website types, purposes of the use and system quality. In the case of internet shopping malls, playfulness, compatibility, website quality were identified as key influencers, while for stock trading users, however, commitment and security factors are more important. In terms of user purposes, information search requires both the compatibility and the website quality. Also the website quality was strongly affected by the user system quality. In other words, any investment of upgrading the website system quality can be meaningless unless the user system quality is improved as well. For each variable considered, empirical results are discussed and practical implications are provided.

• Journal of Information Technology Services
• /
• v.14 no.4
• /
• pp.15-30
• /
• 2015

SMBA (Small and Medium Business Administration) and TIPA (Korea Technology and Information Promotion Agency for SMEs) have operated the Business Innovation Platform for SME Informatization based on cloud computing technology with the cooperation of seven industry cooperatives since 2013. This project will evolve into the open market platform where service providers and users voluntarily participate and transact. This research conducts the literature review about the concept of open market and the empirical analysis through survey for the software providers and the future users regarding the future operation methods. The policy about how the open market strategy for the business innovation platform needs to be designed and implemented are organized as the three differentiated government support strategies. The first is to provide free IT services including specialized core operation support S/W which is developed only for the small or home office group of firms which lack minimal informatization capability and budget. The second is to augment IT platform service through incorporating ERP supplier initiated commercial S/W sales window for those firms having medium level informatization capability. This includes to provide IT support for customization and system integration with existing government subsidized S/W. The third is to provide upgrading services of existing S/W functions to facilitate better system utilization. The results provide useful insight for government role to enhance SME competitiveness using IT.

• Journal of Industrial Technology
• /
• v.39 no.1
• /
• pp.27-31
• /
• 2019

Semiconductor logistics systems are facing difficulties in increasing production as production processes become more complicated due to the upgrading of fine processes. Therefore, the purpose of the research is to design predictive models that can predict traffic during the pre-planning stage, identify the risk zones that occur during the production process, and prevent them in advance. As a solution, we build FABs using automode simulation to collect data. Then, the traffic prediction model of the areas of interest is constructed using deep learning techniques (keras - multistory conceptron structure). The design of the predictive model gave an estimate of the traffic in the area of interest with an accuracy of about 87%. The expected effect can be used as an indicator for making decisions by proactively identifying congestion risk areas during the Fab Design or Factory Expansion Planning stage, as the maximum traffic per section is predicted.