• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.66 no.9
• /
• pp.1379-1384
• /
• 2017

To guarantee safety and reliability, RAMS(Reliability Availability Maintainability and Safety) activity for a communication software in train communication network is studied. In this paper, preliminary hazard analysis in RAMS activities is studied for the communication software. Preliminary hazard analysis is done through library for communication software that the specification is defined by IEC 61375. The hazards are defined, then causes and consequence for each hazard are defined. The total 36 preliminary hazards are classified. For high severity hazards are changed to acceptable level by upgrading of system requirement specification.

• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.64 no.3
• /
• pp.97-103
• /
• 2015

To achieve the safety and reliability, RAMS activity for a railway signal system of Near Surface Transit is studied. In this paper, preliminary hazard analysis in RAMS activities is studied for the railway signal system of Near Surface Transit. Preliminary hazard analysis is done through automatic train protection, automatic train operation and automatic train supervision. The hazards are defined, then causes and consequence for each hazard are defined. The total 75 preliminary hazards are classified. For high severity hazards are changed to acceptable level by upgrading of system requirement specification.

• International journal of advanced smart convergence
• /
• v.10 no.2
• /
• pp.59-63
• /
• 2021

In order to broadcast 8K UHD, domestic broadcasting is upgrading production, operation, and transmission technologies in a new way that has various forms such as terrestrial broadcasting, IPTV, mobile, and streaming services. In order to overcome the existing SDI transmission technology that has reached its limit, new transmission technologies using ICT-based convergence such as IT, Network, IOT, and Big Data are developing. Internet Protocol(IP) transmission technology is an IT-based core protocol that transcends various broadcasting infrastructures. Therefore, it can be said that the technology for converting the broadcasting system based on IP is a natural one for preparing for 8K UHD in the future. In this paper, we propose an IP transmission system that adopts a network that can transmit 8K with hardware of 12G Serial Digital Interface (SDI), in order to prepare for the future broadcasting system according to the development of ALL IP interface technology.

• International Journal of Internet, Broadcasting and Communication
• /
• v.15 no.2
• /
• pp.196-201
• /
• 2023

In recent years, virtual reality (VR) technology has been widely used in many industrial fields, especially in the fields of medical treatment, games, film and television, to improve the interaction between medical teaching and practical treatment. On the gaming side, the production of virtual reality gaming screens and scenes became increasingly popular, greatly expanding the form of the visual experience. But VR is no longer confined to the health care, education and entertainment industries. During this time, the news media industry has also begun to integrate virtual reality into interviews and user interactions. This study aims to analyze the development of VR technology from the perspectives of immersive VR news experience, real reporting, and prospects, and analyze and think about the interactive participation of media users, the transformation of traditional media, and the upgrading of practitioners' roles.

• Journal of Energy Engineering
• /
• v.16 no.2
• /
• pp.83-92
• /
• 2007

In view of stringent environment regulations to control the emission of green house gases and also depleting fossil fuel reserves, it is high quality desirable to develop alternative technologies to produce high quality fuels. To this end Biomass to Liquid (BTL) technology has received much attention in recent years. BTL process generally consists of gasification of biomass to produce bio-syngas, cleaning and control of $H_{2}/CO$ mole ratio of bio-syngas and Fischer-Tropsch synthesis & upgrading systems. Choren, Germany has first developed the commercial BTL process using unique gasification system i.e., Carbo-V. A new technology to remove tars and BTX has been developed by ECN in Netherlands employing a gasification system combined with OLGA technology. Several other countries including USA and Japan are showing great interest in BTL technology. Thus in view of our national energy security and also the environmental regulations, it is essential to develop alternative technologies like BTL in order to meet the increasing demand of energy though our insufficient biomass resources. In this paper we present an overview and development status of BTL-diesel technology.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.4
• /
• pp.1566-1577
• /
• 2015

A novel high step-up converter is presented herein, which combines the conventional buck-boost converter, the charge pump capacitor and the coupling inductor. By doing so, a quite high voltage conversion ratio due to not only the turns ratio but also the duty cycle, so as to increase design feasibility. It is noted that the denominator of the voltage conversion ratio is the square of one minus duty cycle. Above all, there is no voltage spike across the switch due to the leakage inductance and hence no passive or active snubber is needed, and furthermore, the used switch is driven without isolation and hence the gate driving circuit is relatively simple, thereby upgrading the industrial application capability of this converter. In this paper, the basic operating principles and the associated mathematical deductions are firstly described in detail, and finally some experimental results are provided to demonstrate the effectiveness of the proposed high step-up converter.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2009.04a
• /
• pp.62-64
• /
• 2009

Control of back-up roll deformation and wear profile in plate rolling is important not only for enhancement of the structural precision of mill, but also for improving the yield and rolling operation. in the heavy plate mill, there have been strong demands for upgrading back up roll operation technology. In order to satisfy these demands, it is essential to develop the backup roll deformation analysis models and wear profile prediction models. This paper gives a general description of the backup roll deformation and wear model, simulation result for deformation analysis and wear profile.

• The International Journal of Costume Culture
• /
• v.12 no.1
• /
• pp.93-96
• /
• 2009

The purpose of the research is to explore the development of Beijing fashion industry in the wave of the world-wide creative industries. Two methods are used in this study: discourse analysis and case study. As a form of modern economy, creative industries are the core of originality and intellectual property. It works to develop and use knowledge resource to produce endless new products and new markets, thereby promoting economic and social development. Beijing local garment enterprises should base on the Government's policies and support, creative talent and high technology to cultivate the local fashion brands with the international competition to achieve the clothing industrial upgrading and the building of Beijing as the world-wide fashion capital.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.27 no.1
• /
• pp.77-85
• /
• 2019

Biogasification is a technology that uses organic wastes to reproduce as environmental fuels containing methane gas. Biogasification has attracted worldwide attention because it can produce renewable-energy and stable land treatment with prohibit from landfilling and ocean dumping of organic waste. Biomethane is produced by refining biogas. It is injected into natural gas pipeline or used transportation fuel such as cars and buses. 90 bio-gasification facilities are operating in 2016, and methane gas production is very low due to it is limited to organic wastes such as food waste, animal manure, and sewage sludge. There are seven domestic biomethane manufacturing facilities, and the use of high value-added such as transport fuels and city-gas through upgrading biogas should be expanded. On the other hand, the rapid biogasification of organic wastes in domestic resulted in frequent breakdowns of facilities and low efficiency problems. Therefore, the problem is improving as technical guidance, design and operational technical guidance is developed and field experience is accumulated. However, while improvements in biogas production are being made, there is a problem with low utilization. In this study, the problems of biomethane manufacturing facilities were identified in order to optimize the production and utilization of biogas from organic waste resources. Also, in order to present the design and operation guideline of the gas pretreatment and the upgrading process, we will investigate precision monitoring, energy balance and economic analysis and solutions for on-site problems by facility.

• Journal of the Korean Society of Industry Convergence
• /
• v.7 no.4
• /
• pp.425-432
• /
• 2004

This study for Customer Satisfaction(Customer Focus) by Profit security' in the field Process improvement activity and man-power upgrade in the learning of organization activity or upgrading ability of each peoples. This thesis study on the focus of KAPEC which introduce Toyota system can apply to VM, 3jeong, Right Box and Right Position), 5S, JIT(Just In Time), KAlZEN, KANBAN System, CIM, ERP, DAS an output of Factory. For strategic changes to take place in industry 3 key important factors need to be included ; integration of tasks functions and process, decentralization of information and responsibility and finally simplification of products and product structures. These describes how CIM can be implemented using these factors. This study for (1)System Integration, (2) Help Logistic Problems, (3) Partly facilitated growth. (4) Improved production planning (5) Real-time management. (6) Fast reporting (7) Productivity. Quality. Delivery Up, Cost reduction and Autonomy management, FMS in the Plant etc.