• 제목/요약/키워드: up-and-down motion

검색결과 194건 처리시간 0.036초

모션헤드셋의 동작분류기를 위한 사용자 머리동작 분석 (Analysis of User Head Motion for Motion Classifier of Motion Headset)

  • 신춘성;이영호
    • 사물인터넷융복합논문지
    • /
    • 제2권2호
    • /
    • pp.1-6
    • /
    • 2016
  • 최근 다양한 형태의 착용형 컴퓨터가 연구되고 있다. 본 논문에서는 사용자가 음악을 들으며 사용할 수 있는 모션헤드셋의 동작분류기 제작을 위해 머리 움직임 정보의 특징을 분석한다. 모션헤드셋 프로토타입은 스마트폰과 블루투스 통신 방법을 이용하여 음악을 수신받으며, 가속도센서가 측정한 동작정보를 스마트폰으로 전송한다. 그리고 스마트폰에서는 모션 분류기를 통해 머리의 움직임을 분류한다. 실험을 위해 프로토타입을 제작하였다. 사용자 머리의 '위', '아래', '왼쪽', 그리고 '오른쪽' 머리 움직임을 베이지안 분류기를 이용하여 분류하였다. 그 결과 '위'와 '아래'의 머리 움직임의 경우 x, z축의 가속도 센서값이 큰 변화가 있었다. 추후에 사용성 평가를 통해 동작 분류기를 제작할 수 있는 적합한 변수를 찾아 낼 계획이다.

원전시설용 이동로보트의 계단승하강에 관한 연구 (The study on a mobile robot for going up and down stairs in nuclear facilities)

  • 김병수;김창회;황석용;김승호;이종민
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 1990년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 26-27 Oct. 1990
    • /
    • pp.731-735
    • /
    • 1990
  • The mobile robot, named as KAEROT, is designed to go up and down stairs in nuclear facilities. To get a proper stable motion, kinematic modeling and analysis are seriously considered and new climbing algorithm is proposed focused on the stability. A couple of small wheels of one planetary wheel have to contact the surface ol stairs all the time to give the guarantee for stability and safety. To confirm the validity of the proposed algorithm, simulation is carried out. The results make evident of feasibility for the algorithm.

  • PDF

솔레노이드 장치를 이용한 양식용 부자 LED 전원공급 시스템 개발 (Development for auto lightening buoy system using solenoid)

  • 차봉진;배봉성;김현영;조삼광;이건호
    • 수산해양기술연구
    • /
    • 제52권1호
    • /
    • pp.17-23
    • /
    • 2016
  • This study investigates the development of an automatic lightening buoy that can indicate an aquaculture cage at night or in rough weather. The energy for the light is generated by the linear motion of a magnet along with a coil inside the buoy as the waves cause the buoy to oscillate up and down. The principle of the magnet motion is different between the magnet and body of the buoy because the movement of the latter is dependent on the surface wave, while the former is affected by the damper. To obtain a quantitative performance of the buoy, the voltage as well as up and down motion produced by several waves were measured in the wave tank. A shorter wave period, i.e., faster motion, of the magnet produced a brighter light. It is expected that this study can aid in deciding the optimum design of a buoy capable of producing a bright light at any aquaculture site affected by sea or fresh water waves.

Reduced Frequency Effects on the Near-Wake of an Oscillating Elliptic Airfoil

  • Chang, Jo-Won;Eun, Hee-Bong
    • Journal of Mechanical Science and Technology
    • /
    • 제17권8호
    • /
    • pp.1234-1245
    • /
    • 2003
  • An experimental study was carried out to investigate the reduced frequency effect on the near-wake of an elliptic airfoil oscillating in pitch. The airfoil was sinusoidally pitched around the center of the chord between -5$^{\circ}$and +25$^{\circ}$angles of attack at an airspeed of 3.4 m/s. The chord Reynolds number and reduced frequencies were 3.3 ${\times}$10$^4$, and 0.1, 0.7, respectively Phase-averaged axial velocity and turbulent intensity profiles are presented to show the reduced frequency effects on the near-wake behind the airfoil oscillating In pitch. Axial velocity defects in the near-wake region have a tendency to increase in response to a reduced frequency during pitch up motion, whereas it tends to decrease during pitch down motion at a positive angle of attack. Turbulent intensity at positive angles of attack during the pitch up motion decreased in response to a reduced frequency, whereas turbulent intensity during the pitch down motion varies considerably with downstream stations. Although the true instantaneous angle of attack compensated for a phase-lag is large, the wake thickness of an oscillating airfoil is not always large because of laminar or turbulent separation.

경사면에서 골프스윙 동작시 족저압력 분석 (Influence of Different Slope Analysis during Pitching Wedge Swing on Plantar Pressure Distribution Pattern)

  • 손동주;양정옥;이중숙
    • 한국운동역학회지
    • /
    • 제19권2호
    • /
    • pp.297-309
    • /
    • 2009
  • 이 연구에서는 피칭웨지 스윙 시 족저압력 측정기를 이용하여 평지, 오르막 내리막경사면에서의 족저압력분포의 메카니즘을 분석하여 운동역학적인 기초자료를 제공하고자 피험자는 KPGA 3명, KLPGA 3명을 대상으로 족저압력분포를 측정한 후 스윙시간, 동작특성, 평균족저압력 그리고 최대족저압력을 분석한 결과 경사면의 형태변화에 따른 스윙동작 시 구간별 시간변인과 족저압력변인들을 종합적으로 분석 결과 경사면에서의 스윙동작은 백스윙 과정에서 하지의 코일링 동작을 방해하는 요인이 될 수 있으며, 다운스윙과정에서도 체중분산을 최소화시키는 하지의 블로킹 동작과 이 후 릴리스 동작에도 부정적인 영향을 미치는 것으로 분석되었다. 또한 경사면은 스윙동작에 영향을 미칠 수 있는 많은 외적 요인들 중의 하나인데, 오르막경사면에서의 어드레스 자세는 하지의 움직임을 제한하기 때문에 약간 좁은 스탠스를 유지하고, 내리막경사에서는 반대로 하지의 더 큰 활동성을 막기 위하여 더 넓은 스탠스를 가져야 할 것으로 판단되며, 어드레스 자세에서 뿐만 아니라 오르막경사의 다운스윙 동안에도 가능한 신체균형을 유지시키기 위하여 체중을 왼발에 두어야 할 것으로 판단된다.

마이크로프로세스를 사용한 CCTV의 동작제어에 관한 연구 (Study on the Motion Control of CCTV by Miroprocessor)

  • 조수현;김지현;유정봉
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2008년도 학술대회 논문집 정보 및 제어부문
    • /
    • pp.445-447
    • /
    • 2008
  • The CCTV systems is the most extensively used for a burglar proof, a crime prevention and a Prevention forest fires etc. The CCTV systems which is used in present is a PAN/TILT form. We want to control of CCTV systems motion by Up/Down, Left/Right, Zoom In/Out, Focus, TELE. We design a 8051 microcontroller board and a Key Controller and a Relay Controller. We conformed its feasibility through the simulation.

  • PDF

다단식 상하이동형 볼라드의 개발 (Development of a Multistage Bollard with Up and Down Movement)

  • 변홍석
    • 동력기계공학회지
    • /
    • 제19권2호
    • /
    • pp.15-21
    • /
    • 2015
  • Bollard installed on the street is a facility that protects pedestrians by restraining cars from entering on the sidewalk. It is basically classified into manual, semiautomatic, automatic type and mostly manual type is widely used because the automatic type is imported and much expensive. However, in case of manual handling type in practice, it is very troublesome and difficult to remove it whenever cars are permitted, and in case of automatic type, since underbody of a bollard is very long, it is difficult to dig a deep hole in the ground because a pipe, a hose or a cable is under the surface. In order to reduce these difficulties, this paper proposed new design of the multistage bollard that moves up and down automatically by using hydraulic system. This is developed by 6 step creativity of TRIZ inventive problem solving and structural analysis. The developed bollard can be installed in shallow hole and allow entry of vehicles through up-and-down movement without its removal manually. Finally, we could see smoothly motion through the manufactured bollard.

사과 수확 로봇의 핸드 개발(I) - 사과 수확용 로봇의 핸드 개발 - (Development of Apple Harvesting Robot(I) - Development of Robot Hand for Apple Harvesting -)

  • 장익주;김태한;권기영
    • Journal of Biosystems Engineering
    • /
    • 제22권4호
    • /
    • pp.411-420
    • /
    • 1997
  • The mechanization efficiency using high ability machines such as tractors or combines in a paddy field rice farm is high. Mechanization in harvesting fruits and vegetables is difficult, because they are easy to be damaged. Therefore, Advanced techniques for careful handling fruits and vegetables are necessary in automation and robotization. An apple harvesting robot must have a recognition device to detect the positioning of fruit, manipulators which function like human arms, and hand to take off the fruit. This study is related to the development of a rotatic hand as the first stage in developing the apple harvesting robot. The results are summarized as follows. 1. It was found that a hand that was eccentric in rotatory motion, was better than a hand of semicircular up-and-down motion in harvesting efficiency. 2. The hand was developed to control changes in grasp forces by using tape-type switch sensor which was attatched to fingers' inside. 3. Initial finger positioning was set up to control accurate harvesting by using a tow step fingering position. 4. This study showed the possibility of apple harvesting using the developed robot hand.

  • PDF

MRI 촬상단면내의 체동 아티팩트의 제거 (Cancellation of Motion Artifact in MRI Image Plane)

  • 김응규;권영도
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 1999년도 추계종합학술대회 논문집
    • /
    • pp.1075-1078
    • /
    • 1999
  • In this study, a new algorithm for canceling MRI artifacts through the translational motion of image plane is presented. Bloating is often makes problems in a clinical diagnosis. Assuming that the head moves up and down due to breathing, rigid translational motions in only y(phase encoding axis) direction is treated. First, we notice that the x directional motion corresponds to a shift of the x directional spectrum of the MRI signal, and the non zero area of the spectrum just corresponds to x axis projected area of the density function. So the motion is estimated by tracing the edges of the spectrum, and the x directional motion is canceled by shifting the spectrum in inverse direction. Next, the y directional motion is canceled using a new constraint, with which the motion component and the true image component can be separated. Finally, the effectiveness of this algorithm is shown by using a phantom with simulated motions.

  • PDF

주니어 역도 선수 인상 종목의 Dead-lift 동작 시 스탠스유형에 따른 운동학적 변인 비교분석 (The Comparative Analysis on the Kinematic Variables according to the Types of Stance in the Dead-lift of Snatch Events of Junior Weight Lifters)

  • 정남주;김재필
    • 한국운동역학회지
    • /
    • 제18권4호
    • /
    • pp.99-107
    • /
    • 2008
  • 본 연구는 주니어 역도 선수 인상 종목의 주요 국면인 Deadlift 동작 시 스탠스 유형에 따른 운동학적 변인을 비교 분석하여 선수들의 경기력 향상과 훈련 시 기초자료를 제공하기 위하여 실시하였다. 본 연구에서 8자형은 11자형에 비해 바벨과 신체의 발란스에 적합한 소요시간을 보였고 바벨을 끌어올리는데 요구되는 인체중심의 전 후, 좌 우이동범위를 작게하여 인체의 안정성을 유도하였다. 또한 8자형의 인체중심속도와 바벨의 속도는 E3(바가 고관절에 도달할 때)를 지나면서 상방향으로 바를 끌어올리는데 유리한 조건의 큰 속도를 발휘하는 것으로 나타났다. 그리고 몸통과 고관절 무릎, 발목 및 스탠스 각도에서 8자형은 11자형에 비해 인체의 안정성을 유지하면서 순간적인 힘을 발휘하는데 유리한 조건을 갖추고 있는 것으로 나타났다.