• Journal of Electrical Engineering and Technology
• /
• 제1권2호
• /
• pp.177-184
• /
• 2006

In this paper a new dc-link type wind turbine generator system using a shaft generator system, which is widely used for power sources in a ship, is proposed. The basic configuration of the proposed wind turbine generating system is first explained. And the equations expressing the system are derived. Then the steady-state characteristics of the generating system are discussed. We use an experimental system that can simulate the characteristics of a wind turbine in this study, because it is hard to operate an actual wind turbine in a laboratory. In addition, the transient responses of this system are investigated when the velocity of the wind is changed. It is shown that experimental results were very close to the simulated ones, supporting the usefulness of the theory.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.1495-1499
• /
• 2003

There is some equipment that helps user to exercise and to walk. But almost all equipments require some physical strength of their muscles. So we developed a system that could assist walking action of the people with lower-limb disability. The system called as walking stand adopted the balancing mechanism which assures the stable walking, and the 4 link-based mechanism that had 2 degrees of freedom on each leg. The walking stand uses four motors and has two sets of the special link-structure to simulate the human walking mechanism. With our system, even serious disabled with lower-limb disability may enjoy walking rehabilitation. And by adjusting the power, it can be used as the walking assistant mechanism instead of conventional wheelchairs. Experiments showed that our walking stand is applicable to the rehabilitation and also to the mobile device in our daily life for those people who do not have enough physical ability to walk by themselves.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 A
• /
• pp.39-42
• /
• 2000

In stressed power system, due to the presence of increased nonlinearity and the existence of nonlinear modal interactions, there exist some limitations to the use of conventional linear system theory to identify the optimum sites for controller. This paper proposes an approach to identify the optimum sites for controller using the method of normal forms. In this paper nonlinear participation factor and coupling factor are proposed as a measures of identification of optimum sites for controller and a selection procedure is also proposed. The proposed procedure is applied to the 10-generator New England System and the KEPCO System in the year of 2010 to illustrate its capabilities.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국내학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.758-761
• /
• 1991

Using one chip microcontroller 87Cl96 (On chip EPROM type) and EPLD (Erasable & Programable Logic Device), an implantable control system to drive pendulum type electromechanical total artificial heart was developed. This control system consists of 4 parts, main management system, motor driver with power regulator, state monitoring system and communication part. The main system has the functions for speed detection, PI(proportional and integration) control, PWM generation, communication and analog data processor. Two kinds of power system were used and separated by 8 photo coupler arrays to improve the system stability. The performances of each compartments were compared with our previous z80 microprocessor based control system and good correspondences was shown. Logic power consumption was reduced to a one third of our previous controller. Using mock circulation tests, the overall performances of control system are evaluated.

• 제어로봇시스템학회논문지
• /
• 제18권5호
• /
• pp.433-438
• /
• 2012

In this paper, a operation network system equipped with onboard wireless communication systems and ground-based mission control systems is proposed for swarm flight of small UAVs. This operating system can be divided into two networks, UAV communication network and ground control system. The UAV communication network is intend to exchange the informations of navigation, mission and flight status with minimum time delay. The ground control system consisted of mission control systems and UDP network. Proposed operation network system can make a swarm flight of various UAVs, execute complex missions decentralizing mission to several UAVs and cooperte several missions. Finally, PILS environments are developed based on the total operating system.

• Journal of Advanced Marine Engineering and Technology
• /
• 제36권7호
• /
• pp.919-926
• /
• 2012

In order to control a LTI(Linear Time Invariant) system subjected to system noise and measurement noise, first of all, it is necessary to estimate the state of system with reliability. Kalman filtering technique has been widely used to estimate the state of the stochastic LTI system with stationary noise characteristics because of its estimation ability versus algorithm simplicity. However, it often fails to estimate the state of the LTI system of which system parameter uncertainty exists partly and/or input uncertainty exists. In this paper, a new estimation technique based on Kalman filter is suggested for stochastic LTI system under parameter uncertainty and/or input uncertainty. A fuzzy estimation algorithm against uncertainties is introduced so as to compensate the state estimate filtered by Kalman filter. In order to verify the state estimation performance of the suggested technique, several simulations are accomplished.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 추계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.369-371
• /
• 2002

The railway power feeding system is divided into AC power feeding system and DC power feeding system. In downtown area. DC power feeding system is used and AC power feeding system is used in intercity railway system. AC power feeding system raises a inductive disturbance that is divided into electrostatic induction and electromagnetic induction. Especially, it has a bad effect on communication lines. So inductive disturbance reduction method has been adopted in many system. In this paper, we deals with the inductive disturbance reduction method of railway power feeding system and of sides affected by inductive disturbance.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 A
• /
• pp.42-45
• /
• 2003

This paper presents a method for assessing reliability indices of transmission system. Because successful operation of electric power under the deregulated electricity market depends on transmission system reliability management, quantity evaluation of transmission system reliability is very important. The key point idea is based on that the reliability level of transmission system is equal to reliability level difference of between composite power system(HLII) and generation system(HLI). It is the reason that composite power system includes uncertainties and capacity limit of transmission lines. The practicality and effectiveness of this methodology are illustrated by the case study using the KEPCO size system.

• Journal of Information Processing Systems
• /
• 제14권4호
• /
• pp.1033-1048
• /
• 2018

This paper proposes an integrated lighting enabler system (ILES) based on standard machine-to-machine (M2M) platforms. This system provides common services of end-to-and M2M communication for smart lighting system. It is divided into two sub-systems, namely end-device system and server system. On the server side, the M2M platform OpenMTC is used to receive data from the sensors and send response for activating actuators. At the end-device system, a programmable smart lighting device is connected to the actuators and sensors for communicating their data to the server. Some experiments have been done to prove the system concept. The experiment results show that the proposed integrated lighting enabler system is effective to reduce the power consumption by 25.22% (in average). The proving of significance effect in reducing power consumption is measured by the Wilcoxon method.

• International Journal of Aeronautical and Space Sciences
• /
• 제18권3호
• /
• pp.574-578
• /
• 2017

In order to achieve iterative design in early R&D period, a Distributed and Real-time Integrated Simulation System for avionics based on a Model-Based Systems Engineering (MBSE) method is proposed. The proposed simulation system includes driver, simulation model, monitor, flight visual model and aircraft external model.The effect of this simulation system in iterative design and system verification is testified by several use cases. The result shows that the simulation system, which can play an important role in iterative design and system verification, can reduce project costs and shorten the entire R&D period.