• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.29 no.5A
• /
• pp.467-475
• /
• 2009

Existing studies have suggested Universal Curve only for supplemental damping by damper. Therefore net damping has been determined by means of arithmetic summation between intrinsic, aero-damping of cable and supplemental damping of damper. However linear combination approach by means of the arithmetic summation is not enough theoretical background. So validity of this approach should be verified in order to design adequate cable-damper system by engineers. This study establishes governing differential equation which can consider intrinsic, aero-damping and supplemental damping as well. And also analysis method is solved by combination of muller method and successive iteration method. Consequently, this study succeeds in verification for validity of linear combination approach. As a result of this study, linear combination approach is limitedly effective in case of low stiffness and optimum damping coefficient of damper, short distance from support to damper, lower vibration mode, low aero-damping, and normal windy environment. Whereas this study will be effective in case of opposite conditions, and existing studies or linear combination approach occur to further error. Meaning of this study presents exact solution for net damping of cable-damper system, and verifies linear combination approach by means of the analysis method. In the future, if monitoring of optimum damping coefficient of a damper against aero-damping is feasible on time, algorithm of this study will be available for control of cable and semi-active damper system such as magneto-rheological damper.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.388-392
• /
• 2007

지구온단화와 이상기후에 의해 시설물 피해가 나날이 증가하고 있으며, 농촌의 인구감소 및 고령화에 의해 이러한 집중강우등에 대한 대처도 어려운 실정이다. 현재 전국에서 농업용수 공급을 위해 사용하고 있는 농업용 저수지는 17,882개소로서 이 중 축조한지가 35년 이상 경과된 저수지가 15,856개소로서 88.7%나 차지하고 있다. 이러한 현상은 저수지를 구성하고 있는 각종 부대시설의 노후화로 귀결되며 농업용수의 낭비 및 효율적인 운영을 위해서는 시설의 현대화가 필수적이라고 할 수 있다. 따라서 본 연구에서는 저수지에서 물을 직접 공급하는 시설인 사통수문을 대상으로 현대화를 이룩하고 또한 사용동력도 대체에너지를 이용하기 위한 방안을 제시하였다. 사통수문의 수문비는 수중의 압력을 효율적으로 분산시킬 수 있는 원형수문비와 수중에서도 사용동력을 가장 적게 할 수 있는 밸브형을 기준으로 개발을 하였으며, 수문비와 구동부를 연결하는 작동 롯드의 힘전달을 최소화하기 위하여 유니버셜 쪼인트를 볼밸브형으로 개발하였다. 이에 따라서 작동용 롯드의 길이가 길어져도 수문비에 걸리는 작동모멘트를 최소화하여 태양광을 이용한 동력사용이 가능해졌다. 특히 수중에서 움직이는 특성을 감안하여 원형 수문비의 경우에는 수문비와 수문틀 사이에 마찰력을 감소시키기 위하여 수문틀측을 약간 경사지게 가공을 하고 중간에 볼 베이렁을 부착시켜 수문개폐가 원활토록 지수부의 구조변화를 하였다. 또한 농업용수공급시 수류와 함께 유입되는 저수지 내 오물을 차단하기 위하여 수문의 전면에 스크린을 설치하였으며 토사퇴적으로 인하여 수문작동의 방해가 되지 않도록 하기 위하여 토목구조물을 설치하였다. 그리고 동력전달을 효율적으로 하기 위하여 Solar Unit으로부터 나오는 전기를 중전기에서 밧데리로 축전을 시키고 완전 충전 후에는 나머지 전기는 방전이 되도록 회로를 구성하였다. 사통수문 자원조사 결과에 의하면 현재 저수지에 물공급을 하는 수문은 취수탑 형식이 70% 이상을 차지하고 있으며 나머지 30%의 사통수문 중 원형수문비가 98% 이상을 차지하고 있다. 현재 대체에너지를 사용하는 저수지 사통수문은 없는 것으로 조사되었으며 전력을 사용하는 사통도 조사결과에 의하면 20% 이내로 나타났다. 이러한 결과는 향후 수리시설 개보수시 적은 예산으로 사업을 시행하는 경우 사통수문의 설치방향의 지표가 될 것으로 판단되며 수리시설의 운영관리에 대한 새로운 대안으로 제시할 수 있다.

• Journal of architectural history
• /
• v.4 no.2 s.8
• /
• pp.25-44
• /
• 1995

Bricks are the earliest man-made building materials. Small-size bar bricks were found in use in the Warring States Period(戰國時代) in China. During the Qin(秦) and the Han(漢) Dynasties, brick constructions were built on a larger scale, but most of them were tombs. In case of Korea, bricks were found in use in the Three Kingdoms Period, but also most of them were tombs. Starting from the Unified Silla Period(統一新羅時代), brick gradually became a universal practice to built Buddhist Pagodas with bar bricks. Brick pagodas emergence marked a stage where technological progress made it possible for man to built high-rise brick work, and their dvelopment further perfected masonry technique and enabled building technology to attain new heights. Though from the very start brick pagodas existed side by side with stone pagodas, at the enitial stage they were overshadowed by their wooden counterparts and stone counterparts, because masonry thechiques were then still rather primitive, while woodwork and stonework had already reached a fairly advaced stage. The pagodas in ancient Korea were closely related to the Chinese stupa, which consisted of three parts, namely, the base, the body and the spire. The fact was, soon after the stupas were introduced into Korea, the Korean stupas began to develop features of their own. Korean brick pagodas were made up of a single-storeyed square base, multi-storeyed square body with a small gate, and a steel post with several layers of lotus flower superimposed one on the other.

• The Journal of Korea Robotics Society
• /
• v.4 no.1
• /
• pp.1-9
• /
• 2009

Radio Frequency Identification (RFID) is an automatic identification method. Information such as identification, logistics history, and specification of products are written and stored into the memory of RFID tags (that is, transponders), and retrieved through RF communication between RFID reader device and RFID tags. RFID systems have been applied to many fields of transportation, industry, logistics, environment, etc in order to improve business efficiency and reduce maintenance cost as well. Recently, some research results are announced in which RFID devices are combined with other sensors for mobile robot localization. In this paper, design of multi-protocol baseband for RFID reader device is proposed, and the baseband modem is implemented into SoC (System On a Chip). The baseband modem SoC for multi-protocol RFID reader is composed of several IP (Intellectual Property) blocks such as multi-protocol blocks, CPU, UART(Universal Asynchronous Receiver and Transmitter), memory, etc. As a result, the SoC implemented with FPGA(Field Programmable Gate Array) is applied to real product. It is shown that the size of RFID Reader module designed with the FPGA becomes smaller, and the SoC chip price for the same function becomes cheap. In addition, operation performance could be the same or better than that of the product with no SoC applied.

• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1229-1239
• /
• 1996

The increase of additional information broadcasting of TV demands a graphic overlay processor. This paper is about the design, implementation and testing of a graphic overlay processor called by KBPS decoder ASSP (Applicatio n Specific Standard Product) which is compliance with Korea Broadcast Programming System. KBPS decoder ASSP consists of embedded 8 bit microprocessor Z80, graphic overlay controller, KBPS schedule decoder, memory controller, priority interrupt controller, MIDI controller, infrared raccoon receiver, async scrial communication controller, timer, bus controller, universal parallel input-output port and serial-parallel interface. The 0.8 micron CMOS Sea of Gate is used to implement the ASSP in amount of about 31,500 gates, and it is running at 14.318MHz.

• Annual Conference of KIPS
• /
• 2018.10a
• /
• pp.5-7
• /
• 2018

VLSI(Very large scale integration) 기술을 통한 트랜지스터의 소형화를 통해 CMOS 집적 회로의 성능은 지속적으로 발전해 왔다. 이와 같은 기술 발전에 따라 집적 회로를 구성하는 디지털 논리 요소 또한 진화를 하고 있다. 디코더는 부호화된 정보를 다시 부호화되기 전으로 되돌아가는 처리를 하는 디지털 논리 요소이며 컴퓨터 설계에서 많이 사용되는 핵심 요소이다. 본 논문에서는 양자점 셀룰라 오토마타(Quantum Cellular-Automata, QCA)를 사용하여 인에이블 입력을 가진 2-to-4 디코더를 제안하였다. 4-입력 유니버설 게이트의 하나의 입력을 1로 고정시켜 3-입력 NOR 게이트로 사용하며, 입력 값 X와 입력 값 Y의 중복된 배선 수를 감소시키고 한 배선으로 두 게이트에 입력을 연결하여 디코더의 배선 수와 배선 교차부를 최소화한다. 제안안하는 4-to-2 인에이블 디코더는 기존 디코더보다 셀의 개수와 클럭수를 감소시켜 디코더의 성능을 더 효율적으로 향상시켰다. 이를 통해 고속 회로 설계에 활용 및 높은 성능을 기대 할 수 있으며 QCA 연구에 기여할 수 있을 것으로 전망 한다.

• Journal of Korean Medical classics
• /
• v.22 no.3
• /
• pp.31-51
• /
• 2009

The characteristics of Jin's ideas on clinic theory can be arranged as follows. 1. Jin emphasized warming and tonifying[溫補] in treatment and the part that shows this the best is the taking care of[調理] the Vital gate[命門], kidney, liver, and spleen. His ideas were based on his understanding of a human life's origin, and was influenced by Seolgi(薛己), Joheon-ga(趙獻可) and Janggaebin(張介賓)'s Vital gate and source Gi theory(元氣說) so scholastically, he has that in common with them but was later criticized by later doctors such as Oksamjon(玉三尊) as an 'literary doctor(文字醫)' who followed the ideas of "Uigwan(醫貫)". 2. The warming and tonifying school[溫補學派], who were influenced by Taoism, said in their theory of disease outbreak[發病學說] that since one must not hurt one's Yin essence and Yang fire [陰精陽火] there is more deficiency than excess, so that was why they used tonifying methods. Jin was also like them and this point of view is universal in internal medicine, gynecology, pediatric medicine and surgery and so on. 3. Jin, who saw the negative form of pulse diagnosis[診脈] emphasized following symptoms over pulse diagnosis using the spirit of ‘finding truth based on truth[實事求是]' in "Maekgyeolcheonmi(脈訣闡微)", but emphasized 'the combination of pulse and symptoms[脈證合參]'. He understood pulse diagnosis as a defining tool for symptoms, and in "Seoksilbirok(石室秘錄)" simplified pulse diagnosis into 10 methods : floating/sunken(浮沉), slow/fast(遲數), large/fine(大小), vacuous/replete(虛實) and slippery/rough(滑澀). 4. Jin used 'large formulas(大方)' a lot that usually featured a large dose, and in " Bonchosinpyeon(本草新編)" he thought of the seven formulas(七方) and ten preparations(十劑) as the standard when using medicine. He did away with old customs and presented a 'new(新)' and 'extra(奇)' point of view. He especially used a lot of Insam(人蔘) when tonifying Gi and Geumeunhwa(金銀花) when treating sores and ulcers. 5. In the area of surgery Jin gave priority to the early finding and treatment of disease with internal treatment[內治] and was against the overuse of acupuncture. However records of surgical measures in a special situation like lung abscesses(肺癰) and liver abscesses(肝癰), and anesthetic measures using 'Manghyeongju(忘形酒)' and 'Singoiyak(神膏異藥)' and opening the abdomen or skull, and organ transplants using a dog's tongue are important data. 6. Jin stated the diseases of Gi and blood broadly. Especially in the principles of treating blood, blood diseases had to be forwarded[順] and Gi regulation[理氣] was the number one priority and stated the following two treatments. First, in "Jeonggiinhyeolpyeon(精氣引血篇)" of volume 6 of "Oegyeongmieon(外經微言)", for the rules for treating blood he stated the pattern identification of finding Gi in blood and blood in Gi. Second, he emphasized Gi regulation(理氣) in blood diseases and stated that the Gi must be tonifyed after finding the source of the loss of blood.

• The Research Journal of the Costume Culture
• /
• v.25 no.5
• /
• pp.611-628
• /
• 2017

As a plan for establishing Korea's cultural identity and its competitive edge in the world market and for enhancing Korea's cultural status, creative and unique high value-added cultural products need to be developed utilizing our inherent cultural assets. Accordingly, this study focused on the development of the design of fashion cultural products that utilize the convergence of Hangeul our peculiar font style and Korea's cultural heritage, which is registered as part of UNESCO's World Heritage. A design method was devised that converges archetypal images of cultural property with the unique Hangeul font in a way that targets Korea's symbolic architectures. The symbolic architecture includes Korea's world-heritage pagoda architecture, such as Seokgatap pagoda and Dabotap pagoda at Bulguksa temple. It also included the architecture of royal palace, such as Injeongjeon hall at Changdeokgung palace. Finally, it also included the architecture of the fortress wall, such as Paldalmun gate in Hwaseong fortress. Thus, by developing cultural assets made from a convergence between architecture and the Hangeul font as a consumer-product image that has universality, the possibility of cultural products was pursued by applying color planning after an analysis that involved extracting the compositional colors of the flags of the world. This research and approach will lead to opportunities for further progress for Korea's cultural products in the global market as a results of additional recognition for their value, excellence, and universal appeal.

• Journal of Advanced Navigation Technology
• /
• v.23 no.5
• /
• pp.452-459
• /
• 2019

In this paper, we describe a PCM encoder structure that can update the telemetry system parameters in real time. In the PCM encoder, an analog signal control unit for FPGA, flash memory, and sensor data acquisition was constructed. UART communication, analog signal control, flash memory control, and frame generation are possible through logic inside FPGA of PCM encoder. UART communication allows the PC to transmit parameter data to the PCM encoder, and flash memory is controlled to update the parameter of the telemetry system in real time and finally the frame is formed. Simulation and verification were performed to confirm whether the parameter data is updated in real time, and the proposed structure was used to construct a telemetry system with enhanced flexibility and convenience.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.12
• /
• pp.1-7
• /
• 2008

Magnetic Tunneling Junction (MTJ) has been used as a nonvolatile universal storage element mainly in memory technology. However, according to several recent studies, magneto-logic using MTJ elements show much potential in substitution for the transistor-based logic device. Magneto-logic based on MTJ can maintain the data during the power-off mode, since an MTJ element can store the result data in itself. Moreover, just by changing input signals, the full logic functions can be realized. Because of its programmability, it can embody the reconfigurable magneto-logic circuit in the rigid physical architecture. In this paper, we propose a novel 3-bit arbitrary magneto-logic circuit beyond the simple combinational logic or the short sequential one. We design the 3-bit magneto-logic which has the most complexity using MTJ elements and verify its functionality. The simulation results are presented with the HSPICE macro-model of MTJ that we have developed in our previous work. This novel magneto-logic based on MTJ can realize the most complex logic function. What is more, 3-bit arbitrary logic operations can be implemented by changing gate signals of the current drivel circuit.