• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.429-438
• /
• 2021

Owing to the development of science technology, particularly the smart concept and defense policy factors of the 4th industry, military weapon systems are advanced, and the scientific and operational force is reduced dramatically. The aspect of the future war is characterized by the operation of troops with reduced forces from advanced and scientific weapon systems in an operational area that has expanded more than four times compared to the present. Reflecting on these situational factors, it is necessary to improve combat methods based on the changes in the battlefield environment and advanced weapon systems. In this study, to find a more efficient future combat method in a changing war pattern, this study applied the battle experiment methodology using Vision21 war game model, which is an analytical model used by the army. Finally, this study aimed to verify the future combat method and unit structure. Therefore, the scenario composition and experiment method that reflect the change in the ground operational environment and weapon system was first composed. Subsequently, an analysis method based on the combat effectiveness was applied to verify the effective combat performance method and unit structure of future infantry units.

• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.33-43
• /
• 2016

Drought tolerant species from 26 Korean native plants were selected using different physiological indicators. Arundinella hirta, Solanum carolinense and Carpesium divaricatum were withered after 8days of the stopping of irrigation. Plants except Kummerowia striata, Lespedeza cuneata and Ulmus parvifolia were withered in over 80% at 9-10days of the irrigation stopping. K. striata was withered after 10days, and L. cuneata and U. parvifolia were withered in over 90% after 11days of the stopping of irrigation. As stopping experiment of irrigation, A. hirta, S. carolinense, C. divaricatum, K. striata, L. cuneata and U. parvifolia were proved to be drought tolerant species. Among those plant species, transpiration rate of Cassia mimosoides var. nomame Makino was high as 0.042ml/㎠·4hr. However, unit transpiration rate of U. parvifolia and L. cuneata were 0.005 and 0.010ml/㎠·4hr, respectively. In testing of physiological indicators, leaf area and transpiration rate were different among plant species. Unit transpiration rate of U. parvifolia was lower compared with other plant species. L. cuneata, U. parvifolia, Kummerowia striata, Arundinella hirta and C. divaricatum were high in relative water content and low in relative water loss. As this results, L. cuneata and U. parvifolia. were identified as drought tolerant species.

• Education of Primary School Mathematics
• /
• v.26 no.4
• /
• pp.277-298
• /
• 2023

Despite the significance of teacher guidebooks as a support for teacher learning, there are few studies that address the educative features of teacher guidebooks. The purpose of this study is to develop a framework for analyzing the educative features of teacher guidebooks for elementary school mathematics. The framework developed by Fuentes and Ma(2018) for analyzing teacher guidebooks, "Teacher Learning Opportunities in Mathematics Curriculum Materials", was used as an initial framework by adding the unit development flow that reflects on the organizational features of teacher guidebooks in Korea for elementary mathematics. Then, the framework was modified and supplemented by testing 10 types of teacher guidebooks for Grades 3 and 4 per six units reflecting on different mathematical strands. As a result, the final framework expanded the initial framework and added elements related to each dimension of the framework according to the unit development flow. The analytical framework developed in this study can be used to closely analyze the educative features of teacher guidebooks of Korean elementary school mathematics in the future and to develop teacher guidebooks to promote teacher learning.

• Journal of the Korea Institute of Building Construction
• /
• v.24 no.4
• /
• pp.393-402
• /
• 2024

The Korean Industrial Standard(KS) KS F 2527("Aggregates for Concrete") does not explicitly define criteria for clay mineral content in aggregates. This lack of clear quality standards and testing methodologies is further compounded by a scarcity of relevant research within both academic and industrial spheres. Consequently, the construction industry, encompassing both aggregate production and utilization, often overlooks the management of clay mineral content due to its perceived economic implications. This study addresses this gap by investigating the current state of regulations concerning clay mineral content in aggregates, exploring the causes of its occurrence, and evaluating its impact on concrete performance. The chemical composition of the clay minerals was determined to primarily consist of Al₂O₃, Fe₂O₃, and SiO₂, which are commonly found in clay. X-ray diffraction(XRD) analysis revealed that the predominant clay minerals were montmorillonite and illite, both known for their high absorption capacity. An examination of domestic and international standards for clay mineral content in aggregates demonstrated that the density and absorption rate specifications outlined in KS F 2527("Aggregates for Concrete") only offer indirect estimations of clay mineral levels. Furthermore, the investigation into the influence of clay mineral content on concrete performance suggests that a higher clay mineral content necessitates a corresponding increase in the unit quantity of aggregates to maintain adequate workability. This, however, has a detrimental effect on the compressive strength of the concrete.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.18 no.3
• /
• pp.145-155
• /
• 2002

The results of the present feasibility study are summarized as follows, 1. The three unit bridge of knitted material and UD fibre reinforcement has both the rigidity and the strength against a vertical occlusal load of 75N. 2. Stress concentration at the junctional area between the bridge and the abutments, i.e. between the pontic and the knitted caps was observed. In the case of the bridge with reinforcement straps, it was partly shown that the concentration problem could be improved by simply increasing the fillet size at the area. Further refining in the surface of the junctional area will be needed to ensure a further improvement in the stress distribution. This will require some trade off in the level of the stress and the available space. A parametric study will help to decide the appropriate size of the fillet. 3. Design refinement is a must to improve the stress distribution and realize the most favourable shape in terms of fabrication. The current straight bar with a constant cross section area can be redesigned to a tapered shape. The curve from the dental arch should also be placed on the pontic design. In accordance with design refinement, the resistance of the bridge frame to other load cases should be evaluated. 4. Although not included in the present feasibility study, it is estimated that bridges of the anterior teeth can be made strong enough with the knitted material without further reinforcement using unidirectional materials. In this regard, a feasibility study on design concepts and stress analysis for 3, 4, 5 unit bridge is suggested. 5. Two types of bridge were analysed in terms of fatigue. The safe life design concept, i.e. fatigue design concept, looks reasonable for the bridge where if cracks should form and propagate there is virtually nothing a dentist to do. The bridge must be designed so that no crack will be initiated during the life span. In the case of crowns, however, if constructed with composite resin with knitted materials, it might be possible to repair them, which in general is impossible for crowns of PFM or of metal. Therefore for composite resin crowns, a damage tolerance design concept can be applied and reasonably higher operational stresses can be allowed. In this case, of course, a periodic inspection program should be established in parallel. 6. Parts of future works in terms of structural viewpoint which need to be addressed are summarized as the following: 1) To develop processing technology to accommodate design concepts; 2) More realistic modelling of the bridge and analysis-geometry and loading condition. Thickness variation in the knitted material, taper in the pontic, design for anterior tooth bridge, the effect of combined loads, etc, will need to be included; 3) To develop appropriate design concepts and design goals for the fibre composite FPD aiming at taking the best advantage of knitted materials, including the damage tolerance design concept; 4) To develop testing method and perform test such as static ultimate load test, fatigue test, repair test, etc, as necessary.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.33 no.4
• /
• pp.260-268
• /
• 2017

Purpose: Manufacturing with AM (Additive manufacturing) technique has many advantages; but, due to insufficient study in the area, it is not being widely used in the general clinic. In this study, differences of flexural strength among various materials of 3 unit fixed dental prosthesis were analyzed. Materials and Methods: A metal jig for specimens that had a 3-unit-fixed dental prosthesis figure were fabricated. The jigs were made appropriately to the specifications of the specimens. Three different kinds of materials of specimens which were NC (mathacrylic esther based), DP-1 (Bisphenol A epoxy acrylate type oligomer based), and DT-1 (urethane acrylate based) were printed with DLP machine. Five specimens for each kind of material were printed with an angle of $30^{\circ}$ from the horizontal surface. The specimens were placed on the jig and the flexural strength was measured and recorded using Universal testing machine. The recorded data was analyzed in SPSS using One-way ANOVA and Tukey HSD to determine the significance of the differences of flexural strength among the groups. Results: The flexural strengths of each group were the followings: NC, $1119{\pm}305$ N; DP-1, $619{\pm}150$ N; DT-1, $413{\pm}65N$. Using One-way ANOVA and Tukey Honestly Significant Difference test, significant difference was found between NC and the other groups (P < 0.05), but there was no significant difference between DP-1 and DT-1 (P > 0.05). Conclusion: Higher flexural strength was shown in 3-unit-fixed dental prosthesis that were 3D printed using a DLP machine with NC material.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.9 no.6
• /
• pp.490-494
• /
• 2004

An efficacy test of PRP (polyribosylribitol phosphate)-TT (Tetanus toxoid) conjugate vaccines was carried out using BALB/c mice as an animal model by inoculating Haemophilus in­fluenzae type b (Hib) with a virulence enhancement factor (VEF). Three administrations of the conjugate vaccines at 2-week intervals elicited a significantly high level of PRP antibodies (P>0.0001). The protective activity of the PRP immunization was challenged with either Hib with iron dextran (Hib/) or with a combination of mucin and hemoglobin (Hibmh) as a VEF. The me­dium lethal dose $(LD_{50})$ for Hibmh and Hibiwas measured as 10 CFU (Colony Forming Unit) and $2.5{\times}10^{8}$ CFU respectively. Each immunized animal was challenged with five or ten times the $LD_{50}$ level of bacteria with a VEF. A significant difference in mortality between the immunized and control mice (P> 0.01) was observed with the Hibmh challenge inoculation but not with the Hibi challenge inoculation. These results show that a combination of mucin and hemoglobin was able to enhance the virulence of Hib in BALB/c mice to cause a lethal infection, thus suggesting that BALB/c mice introduced to this method can be an effective model animal for testing the protective efficacy of H. influenzae conjugate vaccines.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.645-657
• /
• 2015

In this study floor impact noise and structure acceleration response of bare concrete slabs were predicted by using Finite Element Analysis(FEA). Prediction results were compared with experimental results to prove the accuracy of numerical model. Acoustic absorption were addressed by using panel impedance coefficients with frequency characteristics and structural modal damping of numerical model were applied by modal testing results and analysis of prediction and test results. By using frequency response function, the floor acceleration and acoustic pressure responses for various impact sources were calculated at the same time. In the FEA, the natural frequencies and the shapes of vibration and acoustic modes can be estimated through the eigen-value analysis, and it can be visually seen the vibration and sound pressure field and the contribution of major modes.

• Journal of KIISE
• /
• v.44 no.5
• /
• pp.510-521
• /
• 2017

The software development process (SDP) plays an important basic role in software engineering education. Every software is developed in accordance with a specific SDP which contains all phases of software development. SDP education helps students to understand the overall techniques and the process of software engineering. This paper introduces a software development methodology (i.e., process) - 'OOPT (Object Oriented Process with Traceability),' which was proposed for use in university software engineering classes. The OOPT is based on object-oriented software development, and it defines concrete requirements as well as outputs of each process/phases. It also contains the unit/system testing and a traceability analysis. We have used the OOPT in software engineering classes at Konkuk university for eight years. This paper conveys our experience as well as future extension and improvement plans.

• Journal of Information Technology Services
• /
• v.17 no.3
• /
• pp.117-138
• /
• 2018

The purpose of this study is to empirically analyze the relationships between the Boundary Spanning Activities (BSA) of project team and system performance in ERP system development projects. We could theoretically classify the BSA in the ERP development projects into five categories on the basis of existing studies on the BSA in the research fields of organization theory, new product development, and information systems development. These five categories are 'Ambassador' activities, 'Task-coordinator' activities, 'Scout' activities, 'Sentry' activities and 'Guard' activities. And the relationship between the implementation level of activities included in each category and the project performance (system usage and users' satisfaction) was hypothesized with respect to five BSA categories. In order to test the hypotheses, we conducted on/offline survey of the participants who were involved in the ERP system development projects, and received 345 valid responses. The unit of analysis was the project team, and the total number of teams that survey participants belonged to were 103 ones. The Structural Equation Model Analysis using the SMART PLS 3.0 was applied to statistically testing the hypotheses. The results showed that 10 hypotheses among 12 hypotheses could be supported. The theoretical implications of this study can be summarized as following; first, redefining and categorizing the BSA (Boundary Spanning Activities) in the ERP system development projects, secondly, deriving measurement indicators of the implementation level for each BSA category and statistically proving the validity and the reliability of them, and finally, suggesting the theoretical background of expanding the management area of ERP systems development projects. Furthermore, the practical implication of this study is that concrete BSA items which are empirically derived can be utilized as effective guidelines for successfully implementing the BSA in the process of managing the ERP system development projects.